低温热分析标准物质的研制

研制了两种0~100℃热分析标准物质,分别为金属镓和水杨酸苯酯标准物质。研制的标准物质具有良好的均匀性和稳定性,采用与NIST,LGC相应标准物质比较的方法定值。NIST为SRM 2234镓,其定值采用288.6~314.35 K范围内的绝热热量计测得温度及热量值;LGC用绝热法为水杨酸苯酯的熔化温度和熔化热定值,两种方法都可以直接溯源至SI单位。对定值结果的不确定度进行了分析和评定。镓和水杨酸苯酯标准物质的熔化温度分别为(29.77±0.20)℃(k=2),(41.81±0.34)℃(k=2);熔化热分别为(80.52±0.48)J/g(k=2),(88.94±0.62)J/g(k=2)。研制的两种标准物质满足国家标准物质的技术要求,申报已获批准。     

Vulcanization kinetics of graphene/styrene butadiene rubber nanocomposites

This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.     

Synthesis,characterization, thermal stability and antibacterial activity of coumarin based methacrylate copolymers

Monomer of 7-methacryloyloxy-4-methylcoumarin(MAOMC) was synthesized and characterized by FTIR, 1H-NMR and 13C-NMR spectroscopy. Copolymers of MAOMC with butoxyethylmethacrylate(BOEMA) at different feed compositions were prepared by free radical solution polymerization at(70 ± 1) °C in ethylmethylketone(EMK) using benzyl peroxide(BPO) as an initiator. The copolymers were characterized by FTIR and 1H-NMR spectroscopy. Thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC) of the copolymers showed moderate thermal stability and higher Tg values. Gel permeation chromatography(GPC) was used to find out the molecular weights of the different copolymers. Antibacterial activities of the copolymers were also investigated against the selected pathogenic bacteria's. The antibacterial activity of the copolymer increases as the MAOMC content increases in the copolymer. This shows that coumarin moiety plays a very important role in the antibacterial activity.     

Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships

The relationship between the rheological properties of nylon-6,6 solutions and the morphology of their electrospun nanofibers was established. The viscosity of nylon-6,6 in formic acid(90%) was measured in the concentration range of 5 wt%-25 wt% using a programmable viscometer. Electrospinning of nylon-6,6 solutions was carried out under controlled parameters. The chemical structure, morphology and thermal properties of the obtained nanofibers were investigated using Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM) and differential scanning calorimetry(DSC), respectively. Entanglement concentration(ce) was found to be 15 wt% and a power law relationship between specific viscosity and solution concentration was observed with exponents of 2.0 and 3.3 for semi-dilute unentangled(c ce) and semi-dilute entangled(c ce) regimes, respectively. The diameter and uniformity of the nanofibers were found to be dependent on the viscosity. Moreover, the average diameter of electrospun nanofibers was found to be dependent on zero shear rate viscosity and normalized concentration(c/ce) in a power law relationship with exponents of 0.298 and 0.816, respectively. For nylon-6,6 solutions, the entanglement concentration(ce = 15 wt%) provides the threshold viscosity required for the formation of a stable polymeric jet during electrospinning and producing uniform beadless fibers. For concentrations less than ce, beaded fibers with some irregularities are formed. DSC analysis showed an increase in crystallinity of all electrospun samples compared to original polymer. Furthermore, Based on FTIR spectroscopy, α phase is dominant in electrospun nanofibers and minor amount of β and γ phases is also available.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

差示扫描量热法测定比沙可啶的纯度

建立差示扫描量热法测定比沙可啶原料药样品纯度的方法。考察了炉体气氛、升温速率、称样量3个因素对差示扫描量热法测定结果的影响,确定差示扫描量热法最佳实验条件:升温速率为2.0 K/min,称样量为2.0~4.0 mg,炉内气体为静态空气。差示扫描量热法测定比沙可啶样品纯度为99.86%,测定结果的相对标准偏差为0.02%(n=6),差示扫描量热法测定比沙可啶样品纯度值与HPLC测定结果具有良好的一致性。该方法可以快速、准确地测定比沙可啶化学纯度,为比沙可啶纯度测定提供了一种新的分析方法。     

自支撑NH2-MIL-125/聚噁二唑复合正渗透膜的制备及性能

合成了高强度亲水性含羧基聚噁二唑材料(POD-COOH)和含氨基金属有机框架材料(NH₂-MIL-125), 以NH₂-MIL-125为填料, 与POD-COOH基体材料进行溶液共混, 并通过溶液浇铸法制备系列新型自支撑复合正渗透膜, 研究NH₂-MIL-125的引入对复合正渗透膜结构和性能的影响. 研究结果表明, 所制备的系列复合正渗透膜均呈致密结构, 且随着NH₂-MIL-125含量的增加, 复合膜的表面亲水性增加、 电负性增强, 并保持良好的机械性能. 以去离子水为进料液, 1.5 mol/L硫酸钠溶液为汲取液, 对上述自支撑复合膜进行正渗透性能测试, 发现由于消除了传统正渗透膜支撑层的内浓差极化现象, 该新型复合正渗透膜在分离过程中具有优异的正渗透性能.     

防离子反馈膜缺陷对像增强器视场的影响

防离子反馈膜是三代微光像增强器的重要组成部分,其质量对像增强器的寿命和视场起着至关重要的作用。研究了防离子反馈膜质量对像增强器视场的影响。选取具有典型缺陷的防离子反馈微通道板（micro-channel plate,MCP）,对防离子反馈微通道板在工作时的视场和防离子反馈膜质量进行分析,获得了防离子反馈膜的缺陷对微光像增强器工作时视场的影响。分析得到防离子反馈膜制备过程中缺陷产生的原因,并初步提出缺陷的解决方案,对后续制备出高质量防离子反馈膜有着非常积极的作用。     

差示扫描量热法测定除草剂绿麦隆的纯度

研究了用差示扫描量热法(DSC)测定绿麦隆的纯度。该法测定最佳条件为升温速率0.5 K.min-1,样品量2~3 mg,保护气流速20 mL.min-1。用本法测得绿麦隆原药的纯度为98.35%,相对标准偏差(RSD)为0.034%,测定结果与已知纯度相符。并将测定结果与高效液相色谱(HPLC)法进行了比较。该法具有操作简便,样品用量少,准确度和精密度均较高等优点。     

超支化聚硅氧烷的紫外光固化行为及固化动力学研究

采用等温差示光量热技术(DPC)研究了超支化聚硅氧烷的紫外光固化行为及固化动力学. 探索了引发剂浓度、 光强度、 聚合温度和环境气氛对固化行为的影响规律. 研究结果表明, 增加光引发剂浓度和光强度及提高环境温度均可提高其固化速率和双键最终转化率. 在空气中固化时存在氧阻聚现象, 增大光强度可以显著缩短诱导期. 运用带扩散因子的自催化固化动力学模型研究了其光固化动力学, 计算出特定条件下的光固化动力学参数, 反应总级数约为6—7, 表观活化能为9.95 kJ/mol. 通过超支化聚合物与两种结构类似的低官能度单体光固化行为的对比, 研究了超支化聚合物固化行为与其分子结构的关系, 发现由于超支化大分子的独特结构, 在固化初始阶段便产生凝胶, 因此双键的最终转化率偏低.