CDMA蜂窝移动通信系统中的无线资源管理算法研究

无线资源管理是CDMA蜂窝移动通信系统保证业务质量(QoS)和提高频谱利用率的关键技术，本文提出了CDMA系统中无线资源管理算法的一般模型，阐述了三种重要的无线资源管理算法，即功率控制算法、呼叫接纳控制算法和分组调度算法的主要研究情况，并分析了目前研究中仍然存在和需要解决的问题。     

强光光学元件波前检测算法

针对强光光学元件高精度检测中使用的两个新参数一——波前位相梯度和功率谱密度的数值计算方法进行了研究，并对目前使用的大口径干涉仪传递函数进行了实验标定。     

在虚拟仪器平台上演示负载与功率的关系

Lab VIEW又称实验室虚拟仪器工程平台，是美国NI公司推出的一种基于G语言的虚拟仪器软件开发工具，用Lab VIEW设计的虚拟仪器可脱离Lab VIEW开发环境，最终用户看见的是和实际的硬件仪器相似的操作面板．     

Measurements of Boundary Plasma in Synergy Discharges of IBW and LHCD on the HT-7 Tokamak

By applying ion Bernstein wave (IBW) heating into the lower hybrid current drive (LHCD) plasma, improved confinements have been obtained in the HT-7 tokamak. The central electron temperature was doubled and the storage energy was increased significantly. The core electron density and temperature were broadened and ther profiles near the edge were steepened. A transport barrier has been formed in the vicinity of the limlter radial location. An enhanced shear in poloidal phase velocity was found in the same region with reduction of the fluctuation levels and the coherences between fluctuations. The results suggest that the improved confinement in the IBW and LHCD plasma is at least partially due to the modification of shear in poloidal velocity and then the suppression of fluctuations and fluctuation induced fluxes via de-correlation effect.     

电源最大输出功率的条件及公式的应用

当外电路的电阻等于电源内电阻时,电源输出功率最大,应用这个结论,可以省去许多计算步骤.但实际应用时还要注意一些问题,下面从几个方面加以讨论.1 电源实际输出功率与最大输出功率的区别 这是两个不同的概念,一些学生往往会用Pm=(?)/4r计算电源输出最大功率,其实,(?)/4r只是电源输出功率的极限,电源一般不在该状态下工作.     

单腔并行双器件功率合成理论与实验研究

本文对一种毫米波单腔并行双器件功率合成器进行了理论和实验研究。分析并计算了矩形波导腔内两只并行振荡器件的外电路阻抗,给出了一些对设计、开发该功率合成器非常有用的数值结果。在36.0GHz频率附近,单腔并行双Gunn器件功率合成器的实验结果为:合成输出功率约400mW,合成效率高于95.5％,大于100mW输出的机械调谐带宽近1.5GHz。     

ZK—4、NaANaHS3种沸石的铝化

用高温气－固相置换法对ZK－4、NaANaHS3种沸石进行铝化。组成分析、尾气分析、X射线衍射、晶体形貌分析、红外光谱和^29Si高分辨魔角固体核磁结果表明，3种低硅铝比沸石铝化后骨架可能存在Al-O-Al键。     

低通量慢中子对Bi系超导体的辐照效应

本文研究低通量慢中子对Bi系超导体的辐照效应。实验结果表明:(1)Bi系超导体在适量慢中子辐照后,临界电流密度J_c和零电阻温度T_c0都有不同程度提高;(2)低通量慢中子和高通量快中子对Bi系超导体具有相似的辐照效应。 关键词：     

Supercontinuum Generation in a Photonic Crystal Fibre

Nearly 1000-nm broad continuum from 390 nm to 1370 nm is generated in a 2-m long photonic crystal fibre. The maximum total power of supercontinuum is measured to be 60mW with the pumping power of 800mW output from a 200-fs Ti:sapphire laser. The evolution of the pumping light into supercontinuum is experimentally studied in detail. It is found that the mechanism for supercontinuum generation has direct relations with Raman effect and soliton effect, and the four-wave mixing plays an important role in the last phase of the supercontinuum generation.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.