Si(001)-(2×2×1):H表面O2吸附的密度泛函理论研究

A novel model was developed to theoretically evaluate the O2 adsorption on H-terminated Si(001)-(2*2*1) surface. The periodic boundary condition, the ultrasoft pseudopotentials technique based on density functional theory (DFT) with generalized gradient approximation (GGA) functional were applied in our ab initio calculations. By analyzing bonding energy on site, the favourable adsorption site was determined. The calculations also predicted that the adsorption products should be Si=O and H2O. This theoretical study supported the reaction mechanism provided by Kovalev et al. The results were also a base for further investigation of some more complex systems such as the oxidation on porous silicon surface.     

A New Synthetic Route to 12-Oxo-1, 15-pentadecanlactam

12-Oxo-1,15-pentadecanlactam 7 was synthesized from cyclododecanone with a totalyield of 36% in a seven-step reaction. The azide 5 to 12-nitro-1,15-pentadecanlactam 6 is the key step featured by direct ring expansion.     

~3Δ、~3Π、~3Σ~＋Ni—CO分子簇的从头算研究

用从头算研究了ｄ空穴位置不同对Ｎｉ—ＣＯ成键机制的影响。结果表明，Ｎｉ—ＣＯ键中σ／π接受作用的相对强弱，取决于Ｎｉ—ＣＯ簇所处的能态。σ空间电子云较π空间电子云弥散，因而Ｎｉ—ＣＯ簇的稳定性与σ空间电子云的排斥密切相关。随着Ｎｉ４ｐσ轨道上电子占据数的增加，Ｎｉ—ＣＯ稳定性减弱。比较了分子簇Ｎｉ—ＣＯ与ＮｉＣＯ分子及ＣＯ／Ｎｉ化学吸附体系之间的性质。     

基于Zn(Q-Ph)2与DCJTB非掺杂型OLED的制备及其电致发光性能研究

合成了有机发光材料2-苯基-8-羟基喹啉锌Zn(Q-Ph)2, 通过1H NMR, UV-Vis及MS等手段对配合物进行了结构表征. 利用该材料与高效的红光染料DCJTB复合制备出全新结构的非掺杂型OLED器件, 其结构为ITO/NPB/DCJTB/Zn(Q-Ph)2/AlQ3/Al. 将DCJTB超薄层的厚度调节到0—2.0 nm范围内, OLED器件的发光色调经历了黄光、红光和橙光的转变, 并且探讨了DCJTB厚度对OLED发光机理以及发光复合区域的影响. 当DCJTB的厚度为0.5 nm时, 获得了稳定的红光发射, 该器件在5.5 V电压下启亮, 在25 V外加电压下发光亮度达到420 cd/m2, 对应的电流密度为250 mA/cm2.     

异构体化合物的电化学传感器检测进展

综述了电化学传感器在分离和检测异构体化合物方面的研究进展.在位置异构体方面,介绍了碳纳米管修饰电极、碳纳米管复合修饰电极、表面活性剂增敏下的玻碳电极对酚类异构体的检测研究(包括萘酚、硝基酚、二硝基酚、苯二酚);在立体异构体方面,重点介绍了碳糊修饰电极、酶修饰电极、手性膜电极、免疫传感器的制备及其在氨基酸对映体检测中的应用,并展望了该研究领域的发展前景.     

苯二酚异构体电迁移行为预测与研究

系统研究了邻、间、对苯二酚3种异构体在毛细管区带电泳中的迁移行为,从理论上分析了解离常数、缓冲液pH与迁移行为之间的关系,进行了定量预测。通过实验讨论了缓冲溶液类型及浓度、缓冲溶液的pH、分离电压等因素对三种异构体分离的影响,获得了优化的分离条件。结果表明,使用未涂层石英毛细管柱(50μmi.d.,50 cm,有效长度为45 cm),在检测波长225 nm,硼砂缓冲溶液30 mmol/L,pH为8.5~9.15,分离电压为10~25 kV的条件下,苯二酚3种异构体均可按对、间、邻的顺序得到基线分离,实验结果与理论预测相符。     

Synthesis and Crystal Structure of the Diiron Azadithiolate Complex [（μ-SCH_2）_2NPh]Fe_2（CO）5（Ph_2PCH_2PPh_2）

Reaction of [(μ-SCH2)2NPh]Fe2(CO)6 with Ph2PCH2PPh2 in the presence of Me3NO·2H2O gave the title complex [(μ-SCH2)2NPh]Fe2(CO)5(Ph2PCH2PPh2)(1)in 78% yield.The new complex 1 was characterized by elemental analysis,spectroscopy and X-ray crys-tallography.It crystallizes in triclinic,space group P1 with a = 10.832(2),b = 12.003(2),c = 15.579(3),V = 1785.6(6)3,Z = 2,C32H26Fe2NO5PS2,Mr = 819.40,Dc = 1.524 g/cm3,μ(MoKα)= 1.064 mm-1,F(000)= 840,T = 113(2)K,the final R = 0.0543 and wR = 0.1218 for 6203 observed reflections(I > 2σ(I)).The Ph2PCH2PPh2 ligand resides in an axial position of the square-pyramidal coordination sphere of the Fe atom and trans to the benzene ring in order to reduce the steric repulsion between Ph2PCH2PPh2 and the benzene ring.     

一箭双雕——手性亚砜-烯配体参与的不对称1,4-加成反应:配体烯键取代基位置引起产物构型的完全翻转

一般而言,要获得构型相反的手性产物,需要使用构型相反的手性催化剂.从易得的单一构型手性源出发,设计不同的配体来实现这一目标具有很大的吸引力和挑战性.烯烃是一种有效的配位基团,近年来手性烯烃作为配体参与不对称催化反应是有机化学的热点研究领域之一     

Synthesis and Crystal Structure of Tianagliflozin Triacetate

The title compound tianagliflozin triacetate 1 was synthesized and its crystal structure was determined by single-crystal X-ray diffraction.The crystal belongs to monoclinic system(C27H31ClO8,Mr = 518.97),space group P21 with a = 5.3913(11),b = 16.137(2),c = 15.411(3) ,β = 94.15(3)°,V = 1337.3(5) 3,Z = 2,Dc = 1.289 g/cm3,F(000) = 548,μ = 0.190 mm-1,the final R = 0.0374 and wR = 0.0809 for 3981 observed reflections(I 2σ(I)).The structure of 1,triacetate of a highly potent SGLT2 inhibitor tianagliflozin,was unambiguously determined by single-crystal X-ray diffraction,which helped to confirm the desired β configuration at the anomeric center and the position where the deoxylation occurred.The two benzene rings in the lattice are basically orthogonal to each other.There are four intermolecular hydrogen bonds in the crystal,which helps to further stabilize the crystal.     

酶催化反应在立体有机合成中的应用

讨论了水解酶、交换酶以及氧化还原酶催化的位置、对映和潜手性立体专一的反应，包括酶催化的醇或酯的水解反应、酯交换反应、含羰基的化合物及活泼双键的还原反应、ＳＰ￣３杂化的碳及烯的氧化反应（包括Ｂａｙｅｒ－Ｖｉｌｌｉｎｇｅｒ氧化反应）。回顾了酶立体选择性地合成某些重要目标结构的生物催化方法，讨论了酶催化反应的生物合成前景。参考文献１８篇。