均匀棒状过氧化氢合碳酸钠制备及非等温热分解动力学

本文制备了均匀棒状过氧化氢合碳酸钠，化学分析确定其组成为Na₂CO₃·1.5H₂O₂，用DTA-TG-DTG技术并辅以X-ray分析研究了它在静态空气、流动氧气和流动氮气气氛中的非等温热分解过程及动力学。     

芯片毛细管电泳程控电源的研制

设计并制作了一种小型的、可与PC机相联的程序控制电源，其中有两路输出电压，用于芯片毛细管电泳的分离和进样；而且，可程序控制输出电压和运行时间，并在PC机上以图形方式显示是泳电流。该电源适用于芯片毛细管电泳的过程监控。     

天然材料微观结构与过程仿生研究进展

仿生是未来新材料设计，制造的潜在的最有效途径。本文综述近年来在天然材料微观结构及过程的仿研究的最新进展。     

金属铜升温熔化过程的分子动力学模拟

采用分子动力学方法模拟了金属铜的升温熔化过程.原子间作用势采用FS (Finnis-Sinclair)势，结构分析采用双体分布函数(PCF)、均方位移(MSD)等方法.计算结果表明,在连续升温过程中，金属铜在1444 K熔化，在该熔化点的扩散系数为4.31×10－9 m2•s－1.上述结论与实验值相当接近，并且比之采用EAM镶嵌原子势所作模拟得到的结果更佳，说明FS势可以用来处理象液铜这样较复杂的无序体系.本文指出了升温速率在金属熔化过程中所起的作用.     

神经网络法用于多元混酸同时测定

利用多层神经网络误差反向传播算法处理酸碱电位滴定数据，求得出多元混合酸各组分的浓度，优化了神经网络的结构和参数，测定了三组分有机酸混合样品，结果良好，平均相对偏差ＲＳＤ≤４％。     

《毛细管电色谱理论基础》

毛细管电色谱作为一种新型微分离分析技术，其分离过程具有多种机理协同作用的特征。对于毛细管电色谱的理论研究不仅要考虑系统的电属性，还要兼顾溶质的两相分配特征。该书系统地阐述了毛细管电色谱的基本理论，讨论了分离过程中影响峰展宽的因素及其规律。基于作者发展的弛豫理论和唯象的输运过程处理方法，阐述了毛细管电色谱中的动力学和热力学问题，分别就不同的分离模式的选择性规律和柱内富集理论与技术、梯度洗脱的溶质输运特征加以说明。     

线性非理想条件下液相色谱柱末端峰形规律

 色谱流出曲线的二阶中心矩μ２和三阶中心矩μ３以及描述峰形非对称程度的偏态系数∑ｋ＝μ３／μ１．５２是反映色谱峰形的重要参数。从液相色谱过程动力学方程出发，运用电子计算机证明了在线性非理想条件下高效液相色谱体系中不同保留值组分在柱末端峰形的分布基本一致的结论。     

SEPARATION AND PURIFICATION OF LIGNIN BY MEANS OF ION EXCHANGE PROCESS

The effect of resin structure on desalination of lignin solution was investigated,the optimal structure of resin is as follows;cross linking degree as 4%,ratio of cationogen to anionogen is near 1.with such resin the desalination of lignin was produced very well because the resin has both molecule sieving and ion retardation properties.The sulfonation degress of lignin and total salt content of lignin solution were determinred with ion exchange technique,the relative error less than 1%.The salt content of small molecule in the lignin solution was calculated from sulfonation degree of lignin and total salt.Among gel and macroporous resins the best separation of lignin from reducing sugar was achieved with interpenetrating sulfonated resin 2×1.5×1.The separation of lignin with interpenetrating resin was carried out simultaneously with fractionation of lignin,the effect of fractionation with macroporous sulfonated resin is better than that with interpenetrating resin,but the former has a definite sorption of lignin which decreased the recovery of lignin.     

An Efficient Route to Prepare Metal Organosols by Phase Transfer Procedure

Silver and gold organosols are easily prepared by transferring nanoparticles from aqueous phase into isooctane with high efficiency (＞90%). Concentrations of sodium oleate and magnesium chloride have crucial effects on the transfer efficiency. Based on the UV-visible absorption spectra, TEM micrographs of nanoparticles, as well as molecular modeling calculation about the adsorption conformation of sodium oleate molecules, a possible phase transfer mechanism is proposed.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.