一个关于勒让德多项式的积分公式及其简单应用——圆形带电环和电流环的静态电磁势

给出了一个关于勒让德多项式的积分公式及其证明,用该公式和叠加法方便快捷地导出了圆形带电环和电流环的静态电磁势.     

Current leads for superconducting magnets of ADS injector I

In an ADS injector i, there are five superconducting magnets in each cryomodule. Each superconducting magnet contains a solenoid magnet, a horizontal dipole corrector （HDC）, and a vertical dipole corrector （VDC）. Six current leads will tm required to power the electrical circuits, from room temperature to the 2.1 K liquid helium bath： two leads carry 100 A current for the solenoid magnet while the other four carry 12 A for the HDC and the VDC. This paper presents the principle of current lead optimization, which includes the cooling methods, the choice of material and structure, and the issues for current lead integration.     

64通道一维位置灵敏电流分布探测器及其数据获取系统

针对高流强粒子束与绝缘毛细管相互作用的特点, 设计制作了一套64通道一维位置灵敏电流分布探测器及其配套的数据获取系统, 该探测器可分辨最小直径为1 mm的束斑, 通过数据获取系统可实现可视化自动数据采集。 用2 nA和200—2000 eV电子对探测器进行了定标, 并用10 μA和2000 eV的电子束穿越锥形毛细管后的出射电子, 对探测器及数据获取系统进行测试, 获得了出射粒子的位置分布谱及能量信息。 A 64 channel position sensitive current distribution detector with 1 mm position resolution was developed, while the data acquisition system is based on the LabVIEW software. The test result obtained by using a 2 nA, 200—2000 eV electron beam deflecting by different voltages and the position spectra of 10 μA, 2000 eV electrons transmitted through a glass capillary was measured. The result indicated that the detector can be used to detect the charged particles with strong beam current through the capillary.     

High Bootstrap Current Fraction during the Synergy of LHCD and IBW on the HT-7 Tokamak

More than 70% of the total plasma current is sustained by the bootstrap current and current drive during the synergy of lower hybrid current driving (LHCD) and ion Berstein wave (IBW) heating on the HT-7 tokamak.The lower hybrid non-inductive current source is off-axis and well localized, and more than 35% bootstrap current plasma has been obtained. The IBW in controlling electron pressure profile can be integrated into the LHCD target plasma. The largest steep gradient of the electron pressure profile in the region ρ - 0.5-0.7 mostly comes from the electron temperature profile, which may induce the large fraction bootstrap current. The large off-axis bootstrap current can help to create negative magnetic shear, and the good plasma confinement is achieved.     

一种新型桥路型HTSFCL的实验研究

在研究一种新型桥路型高温超导限流器的限流原理的基础上，研制开发了一台三相600V、故障电流峰值100A的实验室样机．本文介绍了该限流器的功率电路、控制器、低温容器和高温超导磁体等部分的结构特点和功能．在三相系统中进行了各种短路故障限流实验，结果表明该限流器有较强的限流能力和重合闸能力，说明新型高温超导限流器的研究对改善电网动态性能和提高电网电能质量有十分重要的意义．     

太阳能电池基本特性测定实验 --一个与能源利用有关的综合设计性实验

“太阳能电池基本特性测定”是与能源利用有关的新的综合性设计实验．本文简述了该实验的原理、实验方法及测量结果,得出了太阳能电池基本参数短路电流Iac,开路电压Uoc与太阳能电池接收到的相对光强度J／Jn的近似函数关系。     

自发产生相干对Y型四能级原子系统探测吸收的影响

在与三个场相互作用的Y型四能级原子系统中,利用密度矩阵方程计算了介质对探测场的吸收,分析了自发产生相干对探测吸收的影响.结果发现:随着自发产生相干的影响,在共振中心处,探测吸收表现出不同的现象.当自发产生相干对探测吸收产生相消干涉时,随着自发产生相干的增强,在共振中心处削弱吸收,出现增益.当自发产生相干对探测吸收产生相长干涉时,随着自发产生相干的增强,在共振中心处出现吸收增强,也即出现电磁诱导吸收(electromagnetically induced absorption,简称EIA),在共振两侧的双电磁感应透明强度(electromagnetically induced transparency,简称EIT)增强,窗口变宽.同时,在能级| 3〉→| 2〉与| 4〉→| 2〉的自发衰减速率比值不变下,当能级|3〉→|2〉与|4〉→|2〉的自发衰减速率减小时,在共振中心处,吸收线宽变窄,共振两侧的透明窗口变宽.     

偏轴双筒柱电流的磁场

利用双极柱坐标对圆柱电流磁矢量势分布进行变换,给出偏心双筒电流的磁矢量势分布,进而求解了偏心双筒电流在两筒之间的磁感应强度分布.     

Sixth harmonic generation of 1064-nm laser in KBBF prism coupling devices under two kinds of gas conditions

The conversion efficiency on the sixth harmonic of 1064 nm in KBe2BO3F2 （KBBF） at different gas pressures in two kinds of gases, helium and nitrogen, is measured and compared. In the both gases, maximum conversion efficiency on the sixth harmonic of 1064 nm in high vacuum is nearly 10% of 355 nm, which is almost four times higher than that in low vacuum. The maximum average output power at 177.3 nm is 670 ttW with the repetition rate of 10 Hz and the duration of 20 ps in high vacuum. It indicates that the sixth harmonic generation in high vacuum is more preferable than that in low vacuum.     

高温超导直流电缆系统设计及漏热分析

近年来,高温超导技术研究在输配电领域取得了显著的进展,超导电缆应用技术成为其重点发展方向。其中,冷却系统的设计是保证超导电缆输配电系统稳定运行的关键技术。针对一套高温超导直流电缆系统中的终端恒温器、电流引线和超导电缆本体等关键部件进行了漏热分析,并通过理论计算和有限元仿真,对高温超导电缆系统的热负荷进行了评估,为该系统可靠运行提供了保障。