Single Cell Element of Chalcogenide Randoul Access Memory Fabricated with the Focused Ion Beam Method

A singie cell element of chalcogenide random access memory was fabricated by using the focused ion beam method.The contact size between the Ge2Sb2Te5 Phase change film and the top electrode film is about 600nm (diameter) and the contact area is caiculated to be 0.28μm^2.The thickness of the phase change film is 83nm.The current-voltage characteristics of the cell element are studied using the home-made current-voltage tester in our laboratory.The minimum threshold current of about 0.6mA is obtained.     

环形光束的聚焦性质研究

从理想的环形光束出发,理论上分析了环形聚焦光束在焦点附近的光强分布情况,以及光束内外径之比对聚焦性质的影响.然后利用数值模拟的手段,研究了带软化因子的环形光束的聚焦性质,在整体上给出了环形光束的聚焦性质.     

Simulation of ion beam extraction and focusing system

The characteristics of ion beam extraction and focused to a volume as small as possible were investigated with the aid of computer code SIMION 3D version 7. This has been used to evaluate the extraction characteristics (accel-decel system) to generate an ion beam with low beam emittance and high brightness. The simulation process can provide a good study for optimizing the extraction and focusing system of the ion beam without any losses and transported to the required target. Also, a study of a simulation model for the extraction system of the ion source was used to describe the possible plasma boundary curvatures during the ion extraction that may be affected by the change in an extraction potential with a constant plasma density meniscus.     

红外探测器成像实验研究

红外探测器广泛应用于多光谱成像系统中,文章提出并建立了一种红外线阵时间延迟积分探测器的成像实验系统,阐述了成像系统的工作原理,对影响成像质量的两个主要因素电子稳像与自动对焦进行了深入分析。利用高精度直流测速机确定了转台转速与探测器的行转移频率,采用卡尔曼滤波算法滤除了测速机带来的噪声,提高了速度匹配精度。在分析比较红外相机四种检焦方法的基础上采用视频信号幅度法进行检调焦。在国家光学机械产品质量监督检验测试中心实地搭建了成像实验系统,并分别对5.3,6.4和9.2mm宽度靶标成像。实验结果表明,采集到的原始靶标纹理清晰,照相分辨率达到了每毫米11.3对线,达到了实验预期目的。     

高频聚焦换能器声场的激光测量法

本文描述了一种使用激光测振技术测量高频聚焦换能器声场布的方法，并给出了使用该方法对一种高频聚换能器进行测量的结果，通过理论计算对结果的正确性进行了验证。     

双晶单色器弧矢聚焦晶体面形有限元分析

简要介绍了弧矢聚焦双晶单色器的基本原理、聚焦晶体的压弯以及鞍形形变的抑制,提出了柔性铰链弧矢聚焦晶体压弯机构,对弧矢聚焦晶体衍射面的子午形变和弧矢弯曲面形进行了有限元分析;用光学追踪程序SHADOW得出了弧矢聚焦晶体衍射面面形对单色器的光通量和分辨率的影响。     

使用二元相位菲涅尔波带片产生轴向线聚焦

介绍了一种全新的轴向线聚焦方案.采用菲涅尔波带片，在实验中产生了沿轴向长为5mm，宽 100μm的线聚焦.光学测量表明，线聚焦轴向强度分布比较均匀.这些参数基本上可以满足激 光等离子体实验的要求. 关键词： 菲涅尔波带片 轴向线聚焦     

极性晶体外表面电子的量子像势及其极化子的基态能量

本从与真空接触的存在二支声子的半无限极性晶体表面附近极化子的哈密顿算符入手，应用二支模型理论，分别对GaAs和ZnO两种材料计算了外表面电子的量子像势及其极化子的基态能量，计算结果表明，利用二支模型理论求出的外表面极化子的基态能量与利用一支模型理论求出的外表在面极化子的基态能量相差较大，对GaAs，误差约为31.1%, 对ZnO，误差约为14.8%。     

Experimental study of polarity dependence in repetitive nanosecond-pulse breakdown

Pulsed breakdown of dry air at ambient pressure has been investigated in the point-plane geometry, using repetitive nanosecond pulses with 10 ns risetime, 20--30 ns duration, and up to 100 kV amplitude. A major concern in this paper is to study the dependence of breakdown strength on the point-electrode polarity. Applied voltage, breakdown current and repetitive stressing time are measured under the experimental conditions of some variables including pulse voltage peak, gap spacing and repetition rate. The results show that increasing the E-field strength can decrease breakdown time lag, repetitive stressing time and the number of applied pulses as expected. However, compared with the traditional polarity dependence it is weakened and not significant in the repetitive nanosecond-pulse breakdown. The ambiguous polarity dependence in the experimental study is involved with an accumulation effect of residual charges and metastable states. Moreover, it is suggested that the reactions associated with the detachment of negative ions and impact deactivation of metastable species could provide a source of primary initiating electrons for breakdown.     

LD泵浦腔外倍频高转换效率Nd3+∶GdVO4固体激光器

通过合理设计精密调控各元件和温控电流，得到了平均功率为70 mW，脉冲宽度为22 ns，重复频率为14 kHz，峰值功率高达230 W的Nd3+∶GdVO4/Cr4+YAG红外脉冲激光器.先采用双凸透镜组合成的望远镜系统对1 063 nm的红外激光进行扩束，再对该光束聚焦，最后经双轴晶体LBO倍频后，得到了平均功率为40.6 mW，脉冲宽度为16 ns，重复频率为14 kHz，峰值功率高达181 W的绿光激光输出，1063 nm→532 nm的转换效率高达58%.测量了532 nm的光谱线宽曲线.解释了该聚焦方法比单一薄透镜效果明显好的原因，并指出了这种聚焦方法的使用对象.