同轴型爆磁压缩发生器1维磁扩散模型

 基于１维爆轰驱动模型、爆炸管与金属固壁的１维磁扩散模型及回路等效电路模型,编制了关于轴线起爆大电流同轴型爆磁压缩发生器的数值模拟程序CEMG2.0。应用该程序对洛斯·阿拉莫斯实验室设计试验的43 cm长Ranchero发生器进行了对比模拟,结果证明CEMG2.0程序所采用的模型是合理的,可以应用于今后同类发生器的优化设计。     

岛状皮瓣修复足前部皮肤缺损修复的进展

归纳足前部的生物力学和应用解剖研究结果,足前部的皮肤缺损将会导致足的功能障碍,重点讨论了各种岛状皮瓣修复足前部皮肤缺损的优缺点,并对足内侧皮瓣修复足前部皮肤缺损提出了问题和展望.     

光栅磁光阱中原子受力理论分析

从原子受力模型出发,研究光栅磁光阱中衍射光与磁场非正交条件下亚多普勒冷却机制,建立四束型和五束型光栅磁光阱中原子受力冷却和陷俘理论模型,分析光栅磁光阱作用下原子受到散射力与陷俘速度、回复力与形成势阱范围关系,以及光栅衍射角对原子陷俘速度和原子囚陷范围的影响。结果表明,衍射光与入射光的合力在磁场中心位置为零,构成有效势阱,光栅衍射角引起的衍射光偏振分量的变化对原子所受阻尼力、回复力和原子陷俘速度均有影响,也会最终影响到光栅磁光阱囚禁的原子数,为光栅磁光阱实现原子冷却和陷俘,以及光栅芯片设计提供了理论依据。     

可磁分离的氮掺杂二氧化钛光催化剂的制备及光催化性能

将氮掺杂二氧化钛和通过液相催化相转化制备的磁性载体混合、煅烧制备了一种可磁分离的光催化剂TiO2-xNx/SiO2/NiFe2O4(TSN), 这种光催化剂显示出了典型的铁磁性和可见光活性(λ>400 nm). 对该光催化剂的XRD谱图和透射电镜照片进行分析. 结果表明, SiO2/NiFe2O4(SN)纳米粒子黏附在TiO2-xNx聚集体的表面形成了TSN复合光催化剂. 利用光催化降解甲基橙的效果来评价这种光催化剂的活性. 结果表明, 在NiFe2O4和TiO2-xNx之间包覆一层无定形的SiO2, 可以显著地提高催化剂的脱色效果.     

MAGNETOMECHANICAL BEHAVIORS OF GIANT MAGNETOSTRICTIVE MATERIALS

The Laves phase alloy Tb-Dy-Fe, commercially known as Terfenol-D, exhibits the giant room-temperature magnetostriction at moderate field strength of a few kOe due to its combination of high magnetostriction and low magnetocrystalline anisotropic energy. Thus, this pseudobinary rare earth iron compound has found quite a number of applications such as in magnetomechanical transducers, actuators and adaptive vibration control systems. The simultaneous measurements of magnetostriction and magnetization at various fixed compressive pre-stresses applied in the axial direction for Tb0.3Dy0.7Fe1.95 samples are presented. The results show that the magnetostriction increases with increasing compressive stress until it reaches 1742 ×10^6 under 25 MPa, so does the coercive magnetic field. And the hysteresis loop area for magnetization and magnetostriction also increases with the increment of applied compressive stresses. But the maximum magnetic susceptibility χ（dM/dH） is obtained under zero stress field and the strain derivative dλ/dH increases to the highest amplitude of 0.039×10^-6 A^-1m at a stress level of 5 MPa. In the strain versus magnetization intensity curve, the initial fiat stage mainly consisting of a 180° domain wall motion becomes shorter with increasing stress. It means more initial domains are driven to the transversal direction under the compressive stress before magnetization, which is consistent with the improvement of the magnetostriction.     

DEPENDENCE OF DAMPING CHARACTERISTICS OF A BEAM WITH DAMPING RUBBER MAGNETIC POWDER ON RUBBER PROPERTY

A cantilever beam with Damping Material Applying Rubber Magnetic Powder （DRM） has been investigated. Two methods are selected to hold DRM to a vibrating steel beam, one is to attach DRM by the magnetic attractive force （called DRM beam） and the other by adhesive bonding （called AB-DRM beam）. Different from the damping property of AB-DRM beam caused by shear deformation of damping material, the damping property of DRM beam is characterized by the sliding frictional loss together with the internal loss of damping material. The authors established a formulation to predict the damping characteristics of DRM beam, which was validated experimentally. It is found that rubber material loss factor β has a decisive influence on damping improvement of DRM beam versus AB-DRM beam. If β is smaller than the critical value around 0.8255, a valid range of vibratory amplitude always exists in which DRM beam can achieve better damping than AB-DRM beam; conversely, if β is bigger than the critical value, the valid range does not exist when slide occurs. Such results are used to determine the merits and limitations of DRM and develop design guidelines.     

WAVE PROPAGATION IN PIEZOELECTRIC/PIEZOMAGNETIC LAYERED PERIODIC COMPOSITES

This paper is concerned with the dynamic behaviors of wave propagation in layered periodic composites consisting of piezoelectric and piezomagnetic phases. The dispersion relations of Lamb waves axe derived. Dispersion curves and displacement fields are calculated with different piezoelectric volume fractions. Numerical results for BaTiO3/CoFe2O4 composites show that the dispersion curves resemble the symmetric Lamb waves in a plate. Exchange between the longitudinal （i.e. thickness） mode and coupled mode takes place at the crossover point between dispersion curves of the first two branches. With the increase of BaTiO3 volume fraction, the crossover point appears at a lower wave number and wave velocity is higher. These findings are useful for magnetoelectric transducer applications.     

PPCP用固态脉冲电源的实验研究

 介绍了一种采用半导体开关与磁开关、可饱和脉冲变压器相结合技术的固态脉冲电源,此电源可用于脉冲放电等离子体烟气治理。在理论分析的基础上建立了实验模型,通过实验验证了此类电源的可行性,解决了8支晶闸管开关串联的动静态均压及开通同步性问题,并对可饱和脉冲变压器及磁开关的工作特性进行了分析计算。电源在阻性负载上得到峰值电压37.5 kV、前沿101 ns、脉宽1 μs的脉冲,重复频率300 Hz,输出功率10 kW。     

迭代法分析圆环类微带行波天线的辐射特性

利用圆环类微带行波天线的辐射功率与等效行波磁流衰减常数之间的自洽关系,导出了计算衰减常数的迭代方程;为加快迭代速度,将辐射积分中的格林函数展开成柱面波函数,得到快速收敛的级数和.最后给出了方向图的计算曲线,与实验结果对比吻合良好,表明此方法模拟圆环类微带行波天线辐射特性的有效性.     

WO3掺杂的La2/3Sr1/3MnO3电输运与磁电阻特性

通过溶胶-凝胶法制备了La2／3Sr1／3MnO3＋xWO3（x=0～25％）系列多晶陶瓷样品．结果表明。随着WO3掺杂量的增加，样品的电阻率增大，金属-绝缘体相变温度（Tp）值下降．在1．4T磁场下，当0≤x≤12．5％时，样品的室温磁电阻值从5％增大到15％，提高了200％．当12．5％〈x≤25％时，室温磁电阻值从15％降低到0．这对磁电阻材料在室温下的应用提供实验依据．