外开槽同轴波导大轨道回旋自谐振脉塞放大器

 运用大轨道电子束,对外开槽同轴波导回旋自谐振放大器进行了线性动力学理论分析和非线性自洽模型模拟。由线性动力学理论分析和非线性模拟得到的结果在线性增长部分吻合得很好。为了有效抑制绝对不稳定性,对电子束流的选择进行了讨论。计算结果表明：对于电压为700 kV, 电流为100 A, 电子束纵横向速度比为0.8的大轨道电子束, TE₅₁外开槽同轴波导回旋自谐振脉塞放大器的峰值功率和峰值效率分别可以达到6.27 MW和8.96%。     

厚二氧化硅光波导薄膜制备及其特性分析

以硅烷和氧化二氮作为反应气体，采用等离子体增强化学气相沉积(PECVD)技术，不使用掺杂，在单晶硅衬底上制备了用于平面光波导的二氧化硅薄膜。研究了薄膜折射率和淀积速率与工艺参量之间的关系，通过棱镜耦合仪、傅里叶变换红外光谱、原子力显微镜等测试手段，分析了薄膜的结构和光学特性。结果表明，实验能快速生长厚二氧化硅薄膜，薄膜表面平整，颗粒度均匀，同时薄膜具有折射率精确可控和红外透射性能好的特点，非常适合制作光波导器件。     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

掺Er及Yb-Er共掺Al2O3光波导放大器噪音特性的数值模拟

利用由速率方程、有限元场分布、传输方程构建的综合理论模型,数值求解了掺Er及Yb-Er共掺Al2O3光波导放大器的噪音系数和正反向自发辐射功率.结果表明,随波导长度的增加,当增益开始下降时,噪音系数显著增加.同时显示了抽运功率和掺杂浓度对噪音系数的影响,比较了两种掺杂放大器的噪音系数,Yb-Er共掺比只掺Er的约小0.8 dB.     

Properties of Strain Compensated Symmetrical Triangular Quantum Wells Composed of InGaAs/InAs Chirped Superlattice Grown Using Gas Source Molecular Beam Epitaxy

We investigate the properties of symmetrical triangular quantum wells composed of InGaAs/InAs chirped superlattice, which is grown by gas source molecular beam epitaxy via digital alloy method. In the quantum well structure tensile AlInGaAs are used as barriers to partially compensate for the significant compressive strain in the wells, the strain compensation effects are confirmed by x-ray measurement. The photoluminescence spectra of the sample are dominated by the excitonic recombination peak in the whole temperature range. The thermal quenching, peak energy shift and line-width broadening of the PL spectra are analysed in detail, the mechanisms are discussed.     

A New Type of Terahertz Waveguides

A new type of THz waveguides, which employs a solid polyethylene rod as the core and polyethylene tubes in a periodic array of square lattice as the cladding, is proposed. Optical properties of this new THz waveguide, especially in dispersion, confinement loss and single mode property, are investigated in detail with the plane wave expansion method and the beam propagation method. Numerical results demonstrate that the new THz waveguide can reach not only low dispersion but also low confinement loss at single mode propagation. Therefore, the square lattice structure is a better candidate as THz waveguides than the triangular ones.     

Optical Planar Waveguides in KTiOPO4 Crystals by MeV Oxygen Ion Implantation

We report on the optical planar waveguide formation in KTiOPO4 crystals by single or double oxygen ion implantation at energies of 2.4-3.0 MeV and doses of 1015 ions/cm^2. The dark-line spectroscopy properties are investigated by a prism-coupling method. With an effective refractive index method, the refractive index profiles of the waveguides are reconstructed. The program code TRIM＇98 （transport of ions in matter） is used to simulate the implantation process of oxygen ions into the KTiOPO4 crystal. It is found that an inherent relationship exists between the nuclear damage and the refractive index changes induced by the ion-beam implantation.     

Design of Two-Dimensional Photonic Crystal Edge Emitting Laser for Photonic Integrated Circuits

An edge emitting laser based on two-dimensional photonic crystal slabs is proposed. The device consists of a square lattice microcavity, which is composed of two structures with the same period but different radius of air-holes, and a waveguide. In the cavity, laser resonance in the inner structure benefits from not only the anomalous dispersion characteristic of the first band-edge at the M point in the first Brillouin-zone but also zero photon states in the outer structure. A line defect waveguide is introduced in the outer structure for extracting photons from the inner cavity. Three-dimensional finite-difference time-domain simulations apparently show the in-plane laser output from the waveguide. The microcavity has an effective mode volume of about 3.2（λ/nslab）^3 for oscillation mode and the quality factor of the device including line defect waveguide is estimated to be as high as 1300.     

Waveguides induced by grey screening solitons

We investigate the properties of waveguides induced by one-dimensional grey screening solitons in biased photorefractive crystals. The results show that waveguides induced by grey screening solitons are always of single mode for all intensity ratios, i.e. the ratios between the peak intensity of the soliton and the dark irradiance. Our analysis indicates that the energy confined near the centre of the grey soliton and the propagation constant of the guided mode of the waveguide induced by the grey screening soliton increase monotonically with intensity ratio increasing. On the other hand, when the soliton greyness increases, the energy confined near the centre of the grey soliton and the propagation constant of the guided mode of the waveguide induced by the grey screening soliton decrease monotonically. Relevant examples are provided where photorefractive crystal is of the strontium barium niobate type.     

A photonic crystal L-shaped bend based on ring resonators

We propose a new type of two-dimensional （2D） photonic crystal L-shaped bent waveguides based on ring resonators with an acceptable bandwidth. The proposed structure mechanism is based on coupling between a waveguide and a ring resonator. This structure is designed and verified by finite-difference time-domain （FDTD） computation. Our simulation using this method gets over 90% output.