Blue electroluminescence of a novel Zn~(2+)–β-diketone complex with a carbazole moiety

In this letter, a novel zinc complex of Zn(ECTFBD)2 was synthesized by an environment-friendly grinding technique in high yield. Its structure was confirmed by1H NMR, MS and EA. HECTFBD is 1-(9-ethyl-9Hcarbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione. Zn(ECTFBD)2-based light-emitting devices were fabricated. The architecture of the devices was ITO/PEDOT(40 nm)/100 wt% PVK: 40 wt% OXD-7: x wt% Zn(ECTFBD)2(85 nm)/CsF(1.5 nm)/Al(100 nm), where x = 1, 5, and 10(relative to the mass of PVK and OXD-7). The three devices displayed blue emissions with peaks at 450, 458, and 460 nm, respectively. A maximum luminous efficiency of 0.86 cd/A and a luminance of 228 cd/m2were achieved by the 1 wt% doped device. So, we demonstrated further that Zn2+–b-diketone complexes can be effectively severed as a class of new electroluminescent materials. In addition, the thermal stability of Zn(ECTFBD)2 was tested and the UV–vis and photoluminescent behaviors of Zn(ECTFBD)2 in CH2 Cl2 were investigated.     

Simultaneous extraction and preconcentration of copper,silver and palladium with modified alumina and their determination by electrothermal atomic absorption spectrometry

In the present work,an easy solid phase extraction method using alumina modified with polyethylenimine as a new adsorbent was applied to the simultaneous extraction of copper,silver,and palladium ions prior to their determination with electrothermal atomic absorption spectrometry.The analytical procedure involved the complex formation of these cations with polyethylenimine as a chelating agent in buffer media of pH 7.0.Under the optimum conditions,a preconcentration factor of200,150,and 200,precision of ±5.4%,±4.7%,and ±5.2%and linear calibration ranges of 15.0-140,4.0-93,and 7.5-125 ng/L(in original solution) for Cu,Ag,and Pd were obtained,respectively.Also detection limits of3.9,1.1,and 2.0 ng/L were obtained for Cu,Ag,and Pd,respectively.The proposed method was applied to the determination of copper,silver,and palladium in some real samples with satisfactory results.     

Iso-structural phase transition in tetramethylammonium nickel（Ⅱ） nitrite [（CH3）4N][Ni（NO2）3]

The title compound, tetramethylammonium nickel nitrite [（CH3）4N][Ni（NO2）3], has a hexagonal perovskite-type structure with formula ABX3. It undergoes two reversible phase transitions occurring at about 409.1 and 428.4 K, associated with dielectric transitions. DSC measurement and dielectric measurement confirm the transition. The variable-temperature X-ray structural determinations and the powder X-ray diffraction （PXRD） experiments reveal that this compound has the same space group P3ml （No. 164） at 293 K, 413 K and 438 K. The phase transitions are caused by the rotation of the [（CH3）4N]＋ cation.     

不同钨源对合成纳米级WO_3形貌的影响

以钨酸钠、六氯化钨作为钨源,乙二醇、尿素为辅助盐,在酸性反应体系通过水热法合成了纳米WO3,利用XRD、SEM和EDS等对产物进行了表征。结果表明:采用不同的钨源,在相同的水热体系下,对获得的纳米级WO3形貌有较大的影响。采用钨酸钠作为钨源,乙二醇作为辅助剂可获得六方相的WO3。     

3-Oxodapagliflozin as a Potent and Highly Selective SGLT2 Inhibitor for the Treatment of Type 2 Diabetes

Structural modifications of 3-OH in the glucose moiety of dapagliflozin（1）, an approved potent sodium-dependent glucose transporter 2（SGLT2） inhibitor, led to 3-oxodapagliflozin（16）, a highly potent and more selective SGLT2 inhibitor[IC50（hSGLT1）/IC50（hSGLT2）=2851 for compound 16 vs. 843 for compound 1]. 3-Oxodapagliflozin（16） exhibited in vitro（IC50=1.0nmol/L against hSGLT2 for compound 16 vs. 1.3 nmol/L for compound 1） and in vivo activities comparable to those of dapagliflozin（1）. The bioactivities of 3-oxodapagliflozin （16） warrant its further evaluation as a promising SGLT2 inhibitor for the treatment of type 2 diabetes.     

火焰原子吸收法测定中药土大黄中四种微量元素的含量

目的运用火焰原子吸收光谱法测定中药土大黄根中的Fe、Zn、Mg、Ca等4种金属元素的含量。方法用浓HNO3-HClO4消解样品,采用标准曲线法测定其4种金属元素含量。结果所测的样品中含有丰富的人体必需微量元素,尤其是Ca含量极高。方法回收率在96．90％～102．3％之间,样品相对偏差小于5％。结论方法简单、准确,结果令人满意。     

基于石墨烯和金纳米笼修饰的无标记型微囊藻毒素免疫传感器的研制

利用石墨烯及中空结构的金纳米笼构建了无标记型电化学免疫传感器,并用于微囊藻毒素的检测。利用多元醇还原法合成制备了导电性好、催化性强、生物相容性好的金纳米笼;再利用高分散的石墨烯将其固定于玻碳电极表面,进一步吸附固定微囊藻毒素抗体。在无微囊藻毒素存在时,电化学探针[Fe(CN)6]3!/4!在传感器界面上能获得较高的电流响应信号。当培育了微囊藻毒素后,抗体与微囊藻毒素形成免疫结合物,增加了电极表面的电荷密度和传质阻力,阻碍[Fe(CN)6]3!/4!扩散到电极表面,导致[Fe(CN)6]3!/4!的电流响应信号明显降低,电流减小的程度间接地与微囊藻毒素的浓度成比例,可实现对微囊藻毒素的检测。实验考察了抗原培育时间,抗体浓度等条件对该传感器响应性能的影响。结果表明,此传感器对微囊藻毒素的线性响应范围为0.05~1000μg/L,检出限为0.017μg/L,优于文献报道。此传感器操作简单,并且具有良好的稳定性,将其用于实际水样中微囊藻毒素的检测,平均加标回收率为94.1%。     

过渡金属替代的CeO2（111）表面上NO+CO反应机理的理论研究（英文）

采用DFT+U方法研究了过渡金属替代的CeO2(111)表面上的NO+CO反应机理,以探求不同过渡金属对N2选择性的影响.结果表明,在反应过程中,反应活性中心由过渡金属单原子与其最近邻的氧空位组成.NO在过渡金属-氧空位上发生N–O断键,不同过渡金属上该还原步骤的难易程度不同.计算发现,右过渡金属Rh,Pd和Pt替代的CeO2(111)表面可以与吸附物之间形成较强的吸附作用,进而可以达到较高的N2选择性.其主要原因是右过渡金属具有较多的d电子,可以与吸附小分子之间形成有效的反馈键.而左过渡金属拥有较少的d电子,难以有效抓住吸附物,最终导致较低的N2选择性.     

数字离子阱质谱仪低质量截止值的改进方法

本研究在实验室自制的线形数字离子阱质量分析器上,通过改变数码电源的频率扫描方式,在CID过程中,通过扫描数字束缚方波电源的频率和数字激发方波的频率实现母体解离。例如对于利血平母体离子,当将离子数字束缚方波频率从500 kHz扫描到560 kHz,可以测量到低质荷比的碎片离子,成功实现了串级质谱分析的低质量碎片离子的分析。通过与利血平三重四极质谱串级质谱分析实验结果的比较,发现可以在数字离子阱质谱仪上获得与三重四极质谱相同的串级质谱测量结果。结果表明,本方法可以用于低质量离子的测量,克服了传统离子阱质谱进行串级质谱分析的一个主要难点,显著提高数字离子阱质谱的性能。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.