Reaction kinetics of the selective liquid phase hydrogenation of styrene oxide to β-phenethyl alcohol

Liquid phase hydrogenation of styrene oxide using 1% Pd/C and NaOH as a promoter was found to give selectively β-phenethyl alcohol (PEA) under very mild conditions (313–333 K; 0.68–5.5 MPa). The kinetics of this system was investigated by collecting initial rate data in a batch slurry reactor. Rate of hydrogenation was found to decrease beyond a certain concentration of both hydrogen (>3 MPa) and styrene oxide (>0.5 kmol/m³). A Langmuir–Hinshelwood type rate equation has been proposed based on the initial rate data in the kinetic regime. The model predictions agree very well with the experimentally observed concentration–time data indicating the applicability of the proposed rate model.     

Synthesis of well‐defined second‐generation dendritic polymers of isoprene (I) and styrene (S): (S2I)3, (SI′I)3, (I″I′I)3, and (I′2I)4

The synthesis of second‐generation (G‐2) dendritic polymers of isoprene (I) and styrene (S) was achieved with anionic polymerization high‐vacuum techniques and by performing the following steps: (1) selective reaction of a living chain with the chlorosilane group of 4‐(chlorodimethylsilyl)styrene (a dual‐functionality compound) to produce a macromonomer, (2) addition of a second living chain (same or different) to the double bond of the macromonomer, (3) polymerization of I with the anionic sites, and (4) reaction of the produced off‐center living species with trichloromethyl silane or tetrachlorosilane (CH₃SiCl₃ or SiCl₄). The combined characterization results showed that the G‐2 dendritic macromolecules synthesized—(S₂I)₃, (SI′I)₃, (I″I′I)₃, (I′₂I)₄—have a high molecular and compositional homogeneity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1519–1526, 2002     

Synthesis of Arylidene Derivatives of 1-Aryl-3H-pyrrol-2-ones

The aminolysis of 5-aryl-3-arylidene-3H-furan-2-ones by the action of aromatic amines leads to the formation of substituted amides of 4-oxo acids, the subsequent azacyclization of which in the presence of acetic anhydride leads to the formation of 1,5-diaryl-substituted 3-arylidene-3H-pyrrol-2-ones. The mechanism of the occurring and alternative transformations is discussed.     

Synchrotron X-ray absorption of LaCoO3 perovskite

LaCoO₃ perovskite was prepared at 700°C using citrate precursors. The product was then characterized with X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). The powder XRD pattern indicates rhombohedral or its monoclinic I2/a subgroup symmetry. The electronic configuration and the short-range atomic structure of the LaCoO₃ perovskite at room temperature were investigated using synchrotron near-edge X-ray absorption spectroscopy (XANES) and extended X-ray absorption spectroscopy (EXAFS). From the XANES region of the XAS we conclude that Co(III) is at least partly in its intermediate- or high-spin state, which is in accordance with most of the published literature on LaCoO₃ perovskite. The EXAFS region of the LaCoO₃ perovskite spectrum, which up to now was almost not investigated, was simulated satisfactorily for the first two radial structure peaks in terms of the dominant scattering contributions generated with the FEFF8 code and the structural information available from crystallographic data. The best simulation results were obtained with I2/a symmetry. The obtained amplitude reduction factor, zero-energy shift and Debye-Waller factors are useful reference values for data analyses of similar compounds like partly substituted LaCoO₃ perovskite, such as La_1−xCa_xCoO₃ or La_1−xSr_xCoO₃, which are materials of technical interest in catalyst and other applications.     

The Electrochemical Behavior of α‐Ketoglutarate at the Hanging Mercury Drop Electrode in Acidic Aqueous Solution and Its Practical Application in Environmental and Biological Samples

The voltammetric behavior of α‐ketoglutarate (α‐KG) at the hanging mercury drop electrode (HMDE) has been investigated in acetate buffer solution. Under the optimum experimental conditions (pH 4.5, 0.2 M NaAc‐HAc buffer solution), a sensitive reductive wave of α‐KG was obtained by linear scan voltammetry (LSV) and the peak potential was ?1.18 V (vs. SCE), which was an irreversible adsorption wave. The kinetic parameters of the electrode process were α=0.3 and k_s=0.72 1/s. There was a linear relationship between peak current i_{p, α‐KG} and α‐KG concentration in the range of 2×10^?6–8×10^?4 M α‐KG. The detection limit was 8×10^?7 M and the relative standard deviation was 2.0% (C_α‐KG=8×10^?4 M, n=10). Applications of the reductive wave of α‐KG for practical analysis were addressed as follows: (1) It can be used for the quantitative analysis of α‐KG in biological samples and the results agree well with those obtained from the established ultraviolet spectrophotometric method. (2) Utilizing the complexing effect between α‐KG and aluminum, a linear relationship holds between the decrease of peak current of α‐KG Δi_p and the added Al concentration Cequation/tex2gif-inf-5.gif in the range of 5.0×10^?6–2.5×10^?4 M. The detection limit was 2.2×10^?6 M and the relative standard deviation was 3.1% (Cequation/tex2gif-inf-6.gif=4×10^?5 M, n=10). It was successfully applied to the detection of aluminum in water and synthetic biological samples with satisfactory results, which were consistent with those of ICP‐AES. (3) It was also applied to study the effect of Al^III on the glutamate dehydrogenase (GDH) activity in the catalytically reaction of α‐KG+NH +NADH?L ‐glutamate+NAD⁺+H₂O by differential pulse polarography (DPP) technique. By monitoring DPP reductive currents of NAD⁺ and α‐KG, an elementary important result was found that Al could greatly affect the activity of GDH. This study could be attributed to intrinsic understanding of the aluminum's toxicity in enzyme reaction processes.     

6-Substituted-5H-pyrrolo[2,3-b]pyrazines via palladium-catalyzed heteroannulation from N-(3-chloropyrazin-2-yl)-methanesulfonamide and alkynes

We herein report the efficient and convenient synthesis of 6-substituted-5H-pyrrolo[2,3-b]pyrazines. The reaction is a palladium-catalyzed heteroannulation process followed by deprotection to yield the desired pyrrolo[2,3-b]pyrazine substrates. The reaction starts with readily accessible N-(3-chloropyrazin-2-yl)-methanesulfonamide and commercially available terminal alkynes and works with aryl- and alkylalkynes.     

Photokilling Squamous Carcinoma Cells SCCVII with Ultrafine Particles of Selected Metal Oxides

The ability of ultrafine particles of TiO₂, WO₃ and iron-doped TiO₂ to kill cancer cells in the presence of UV irradiation was investigated. The best photokilling effect on carcinoma cells SCVII cultured in vitro showed iron-doped TiO₂ ultrafine particles synthesized by the sol-gel procedure with starting chemicals Ti(IV)-isopropoxide and anhydrous Fe(II)-acetate. It was found that a small particle size and high dispersity influenced citotoxicity and photocatalytic efficiency. The remarkable photokiling effect of highly iron-doped TiO₂ ultrafine particles (the molar ratio Fe/Ti = 0.136) in the presence of UV irradiation was observed. The influence of ultrafine metal oxide particles on the inhibition of cancer cell proliferation was measured using a ³H-thymidine incorporation test. The possible mechanism involved in the photokilling of carcinoma cells with ultrafine particles of selected metal oxides was discussed.     

新显色剂1-羟基-2-(5-NO2-2-吡啶偶氮)-8-氨基-3,6-萘二磺酸与铜显色反应的研究

探讨了新显色剂 1-羟基-2-(5-NO2-2-吡啶偶氮)-8-氨基-3,6-萘二磺酸(简称5-NO2-PAH)与铜离子显色的适宜条件及其共存离子的影响,建立了 5-NO2-PAH测定铜的新显色反应体系.在 pH 7.0～10.0 范围内,铜与试剂形成稳定的 1∶2 配合物,其最大吸收峰位于 653 nm, 表观摩尔吸光系数εCu=4.68×104 L·mol-1·cm-1,铜的浓度在 0 μg/10 mL～14 μg/10 mL 范围内遵守比尔定律.方法已用于合金中铜的测定.     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

KF-alumina 催化下2-氨基-4-芳基-5,6-二氢化-4H-吡喃[3,2-c]喹啉-5-酮-3-羧酸酯衍生物的一步合成

以芳醛、氰乙酸酯和4-羟基喹啉-2-酮为原料, 乙醇为溶剂, 在KF-Al₂O₃催化下80 ℃, 一步合成了2-氨基-4-芳基-5,6-二氢化-4H-吡喃[3,2-c]喹啉-5-酮-3-羧酸酯衍生物, 和其它方法相比, 具有反应条件温和, 容易操作和产率高等优点, 产物4a的结构通过X单晶衍射分析确证.