恒载超声雾化制取金属粉末的改进方法

本文提出一种改进的超声雾化制取金属粉末方法。克服了因变幅杆负载变化所引起的粉末产率的周期变化，给出装置的框图及有关的参数和实验结果。     

Scattering of plane acoustic waves by a transversely isotropic cylindrical shell—application to material characterization

Scattering of obliquely incident plane acoustic wave by an air-filled, transversely isotropic cylindrical shell immersed in water is investigated theoretically and experimentally. The normal mode expansion technique is employed for analyzing the scattering field, and then resonance modes of the shell appearing in modal scattering form functions are identified performing the resonance scattering analysis. Dispersion curves for Sholte-Stoneley, SH and Lamb waves are obtained and their characteristics are interpreted. Calculated backscattering and resonance spectra as well as dispersion curves are compared with those from ultrasonic experiments for two composite samples having the same nominal composition but fabricated under different conditions. Sensitive change of the dispersion curves is observed for both normal and oblique incidences, which demonstrates the feasibility of systematic inverse evaluation of damage or elastic constants of the composite shell using data from the acoustic scattering measurements.     

ZnO/ZrO2 nanocomposite: Sonosynthesis,characterization and its application for wastewater treatment

ZnO/ZrO₂ nanocomposites with different ZnO: ZrO₂ molar ratios (2:1, 1:1, and 1:2)were prepared by sol gel approach under ultrasonic irradiation. For preparation of the nano-composites, the ZnO gel was directly incorporated into the ZrO₂ gel at different molar ratios. The reaction mixture was stirred continuously for two days and then it was ultrasonoicated for 30 min. The filtrated composite gel was washed, and then calcinated at 300 °C in furnace for 3 h. X-ray powder diffraction patterns exhibited well-formed crystal structures and pure crystalline phases in the synthesized nanoparticles (NPs). The FT-IR analyses indicated that the positions of peaks related to Zn-O and Zr-O absorption bands did not change in nano-composites. In addition, FESEM images indicated uniform spherical morphology of the NPs. The highest photo-degradation performance of Congo red (as a model water pollutant) was obtained by 1:2molar ratio of ZrO₂: ZnO in the nano-composite. The particle size and band gap were considered as important factors on nano-catalysts performance. Furthermore, the effects of ultrasonic irradiation, pH, and the concentration of pollutant in solution were investigated on photocatalytic performance of optimum nanocomposite.     

Measurements of coating density using ultrasonic reflection coefficient phase spectrum

A nondestructive method to determine the density of coating has been proposed in this paper based on the ultrasonic reflection coefficient phase spectrum (URCPS). A model was set up first to represent the ultrasonic waves reflected from a coating system at normal incident, and the relation between the extremum of URCPS and the coating density was established to provide the principle of determining the density. The ultrasonic method was validated on a series of ZrO2-7 wt.%Y2O3 (YSZ) coatings with various density. The specimens were prepared by electric beam physical vapor deposit (EB-PVD). After deposition, the specimens were irradiated using high-intensity pulsed ion beam (HIPIB) at different ion current density of 100 and 200 A/cm2 to change coating density. The coating densities of as-deposited and post irradiation by HIPIB were derived to be 4940-5030, 5200-5320 and 5390-5470 kg/m3, respectively. The relative error between the coating density measured by the ultrasonic method and Archimedean principle ranging from 2.53% to 6.11%, indicates that the proposed ultrasonic quantification method provides a reliable nondestructive way to determine coating density.     

正交设计-紫外分光光度法测定青蒿中的青蒿素

以干青蒿叶为原料,考察石油醚萃取青蒿素的工艺条件,如温度、时间、溶剂量及超声功率等因素,正交法确定了最佳萃取工艺条件为温度40℃,超声功率90W,时间20min（两次）,液固比120∶1（mL.g-1）。紫外分光光度法直接测定不同产地青蒿中青蒿素的含量,结果表明：用超声波强化石油醚萃取青蒿素与常规浸泡法石油醚萃取比较,用超声波可以大大缩短萃取时间,提高了萃取率。     

超声检测中变采样问题研究

本文对超声检测中常遇到的变采样问题进行讨论，比较了两种实现方法：基于特征值的二次采样和滤波器组，并给出了二次采样算法。通过试验，对这两种方法在超声信号变采样前后时频域特性的变化做了比较分析，得出前者可以很好地保留检测中所需的特征信号，但频域特性较差；而后者有很好的频域特性，便于进行时频分析。     

A new technique for the identification of ultrasonic flaw signals using deconvolution

The identification of ultrasonic flaw signals is a difficult task in the angle beam ultrasonic testing of welded joints due to the presence of non-relevant signals from the geometric reflectors such as weld-roots and counter-bores. This paper describes a new approach to identify ultrasonic flaw signals in such a problematic situation. A similarity function is defined as the deconvolution of a target signal by a reference signal. The similarity functions for the same type of flaws/references are symmetric bandlimited impulse-like patterns with larger amplitudes while those for different types of flaws/references are asymmetrical broad patterns with relatively smaller amplitudes. Therefore, ultrasonic signals could be identified by the pattern of the similarity function. In the initial experiments, the proposed technique showed great potential for identifying ultrasonic flaw signals in the inspection of weld joints.     

超声喷雾热解法制备SnS薄膜的物性研究

用超声喷雾热解法制备SnS多晶薄膜,对比了三种不同前驱液配比浓度对SnS薄膜性能的影响。XRD测试表明,当前驱液为硫脲(0.5 mol·L-1)+四氯化锡(0.5 mol·L-1)+去离子水时,SnO2的衍射峰强度比较大;当前驱液为硫脲(0.6 mol·L-1)+四氯化锡(0.5 mol·L-1)+去离子水时,SnS的衍射峰占主要地位,其中也含有一定量的SnO2;当前驱液为硫脲(0.7 mol·L-1)+四氯化锡(0.5 mol·L-1)+去离子水时,退火后的薄膜为单一的SnS薄膜,具有斜方晶系结构。SEM观测发现,薄膜均匀、致密,前驱液中硫脲浓度较大时,颗粒也较大。透过谱测试表明,浓度对薄膜透过率影响较小。结合器件的暗I-V和C-V测试,用三种前驱液配比浓度所制备的器件的结特性差异不大;当前驱液中硫脲浓度较大时,载流子浓度相对较大。     

Synthesis of low-melting-point metallic nanoparticles with an ultrasonic nanoemulsion method

A one-step, economical nanoemulsion method has been introduced to synthesize low-melting-point metallic nanoparticles. This nanoemulsion technique exploits the extremely high shear rates generated by the ultrasonic agitation and the relatively large viscosity of the continuous phase - polyalphaolefin (PAO), to rupture the molten metal down to diameter below 100 nm. Field’s metal nanoparticles and Indium nanoparticles of respective average diameters of 15 nm and 30 nm have been obtained. The nanoparticles size and shape are determined by transmission electron microscopy (TEM). Their phase transition behavior is examined using a differential scanning calorimeter (DSC). It is found that these nanoparticles dispersed in PAO can undergo reversible, melting-freezing phase transition, and exhibit a relatively large hysteresis. The experimental results suggest that the nanoemulsion method is a viable route for mass production of low-melting nanoparticles.     

A theoretical analysis of a piezoelectric ultrasound device with an active matching layer

This paper investigates the use of magnetically active materials in the matching layer of a piezoelectric transducer. This then allows the performance of the device to be dynamically altered by applying an external field. The effect that this new matching layer has on the performance of a typical device is theoretically investigated here. It transpires that the additional flexibility of an active matching layer can be used to maintain the efficiency of the device as the external load is varied.