Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

Einkristalluntersuchungen an Fluoroperowskiten MPdF3 (M = Rb,K) und PdF2

Single Crystal Investigations on Fluoroperovskites MPdF₃ (M = Rb, K) and PdF₂ Single crystal investigations on PdF₂ (violet) confirm the tetragonale rutile structure [1, 2] with a = 495.44(3) pm, c = 338.48(3) pm, Z = 2, space group P4₂/mnm-D (No. 136) (x_F = 0.3058(8)). RbPdF₃ and KPdF₃ have been obtained. RbPdF₃ and KPdF₃ both ruby-red single crystals crystallize cubic (perovskite-structure), space group Pm3m-O (No. 221) with a = 429.41(8) pm (RbPdF₃) respectively a = 424.30(4) pm (KPdF₃).     

4,5,6-三取代-2H-吡喃-2-酮的简便合成法

2H-吡喃-2-酮及其衍生物是有机合成的蓬要中间体。对于它们的合成已有许多报道,例如利用烯醇醚或烯醇砖醚与丁酰氯反应;羰基化合物与甲氧亚甲螭丙二酸二甲酯反应;α-苯基丙醛酸酯与丙酮的成环缩合2,6-二氯-3-三氯甲基吡啶与亚甲基丁二酸酯的反应,邻氰基苯乙炔、二苯乙二酮和丙酮的反应。但上述方法往往原料较难得到,产率较低或操作麻烦。     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

聚丙烯共混物反应挤出过程中的降解抑制

聚丙烯／（丙烯腈－苯乙烯）共聚物在过氧化二异丙苯存在下反应共混挤出时，加入亚油酸三甘酯可以有效地抑制过程的降解，从挤出物中分离出聚丙烯组分测试熔体流动速率表明，加入亚油酸三甘酯后，其熔体流动速率有很大下降，扫描电子显微镜的观察表明，调节过氧化二异丙苯和亚油酸三甘酯的加入量，可有效控制降解并生成较多的接枝物相容性，显著改善相形态。     

Comparison of the Hartree-Fock,Møller-Plesset,and Hartree-Fock-Slater method with respect to electrostatic properties of small molecules

Summary The results of various quantum chemical calculations, the Hartree-Fock (HF) method, the Møller-Plesset perturbation theory (MP2), and the Hartree-Fock-Slater (HFS) method are compared. Atomic charges, dipole moments, topological properties of the electron density distribution and polarizabilities, and first hyperpolarizabilities are calculated. Atomic charges obtained with the HFS method are found to be very close to those calculated with the MP2 method, from which we conclude that the HFS method describes to some extent electron correlation effects. Performing an MP2 calculation after an HF calculation improves the molecular dipole moments considerably, yielding values close to the experimental ones. HFS calculations are computationally less demanding than MP2 and yield comparable results for the electron density distributions, dipole moments and polarizabilities.     

Microwave-assisted Suzuki-Miyaura and Heck-Mizoroki cross-coupling reactions of aryl chlorides and bromides in water using stable benzothiazole-based palladium(II) precatalysts

The catalytic activity of benzothiazole-based Pd(II)-complexes was evaluated in Suzuki-Miyaura and Heck-Mizoroki C-C cross-coupling reactions of aryl chlorides and bromides with olefins and arylboronic acids both under thermal as well as microwave irradiation conditions in water. The factors affecting the optimization of such reactions as well as the reusability of the Pd-precatalysts are studied.     

Synthesis and characterization of Cu,Ni and Zn binding capability of some amino- and imidazole hydroxamic acids: Effects of substitution of side chain amino-N for imidazole-N or hydroxamic-N-H for -N-CH3 on metal complexation

Solution equilibrium studies on Cu(II)-, Ni(II)- and Zn(II)-N-Me-β-Alaninehydroxamic acid (N-Me-β-Alaha), -N-Me-α-alaninehydroxamic acid (N-Me-α-Alaha), -Imidazole-4-carbohydroxamic acid (Im-4-Cha), -N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha) and -Imidazole-4-acetohydroxamic acid (Im-4-Aha) systems have been performed by pH-potentiometry, UV–Vis spectrophotometry, EPR, CD, ESI-MS and ¹H NMR methods. According to the results: (i) the amino-N atoms are more basic in N-Me-α-Alaha and N-Me-β-Alaha than the hydroxamate function, but the trend is just the opposite between the imidazole-N(3) and hydroxamate. (ii) The metal ion anchor is always the hydroxamate part in the amino acid derivatives, while it is always the imidazole-N(3) in the studied imidazolehydroxamic acids. (iii) The three studied N-Me derivatives do not form metallacrowns. Only hydroxamate type chelate is formed with N-Me-β-Alaha, but with N-Me-α-Alaha a new type of coordination mode (via amino-N and hydroxamate-O) also exists. N-Me-Im-4-Cha also forms a dinuclear complex, [M₂L₃], with Cu(II) and Ni(II) (but not with Zn(II)). In this complex, one of the three ligands might bridge the two metal ions (five-membered hydroxamate-(O,O) plus five-membered (N_im, O_carb) bridging bis-chelating mode), while each of the additional two ligands binds to one metal. (iv) The two studied N–H derivatives, having dissociable proton on the hydroxamic-N, are able to form metallacrown species. A pentanuclear complex, [M₅L₄H₋₄], is exclusively formed above pH 4 between Cu(II) and Im-4-Aha. Interestingly, this 12-metallacrown-4 type complex, although together with various mononuclear binding isomers, appears also with Ni(II) and Zn(II). Unfortunately, the complexes of Im-4-Cha are not soluble in water at physiological pH at all.     

Synthesis and X-ray structural study of octa-coordinated hexafluoroacetylacetone hafnium(IV) complex

Hexafluoroacetylacetonate hafnium(IV) complex has been synthesized and studied by X-ray structural analysis. Crystal data for C₃₀H₈F₃₆Hf₂O₁₄ are: a = 12.957(3) Å, b = 16.687(3) Å, c = 12.398(3) Å, β = 108.97°, space group P2₁/c, Z = 2, d _calc = 2.137 g/cm³, R = 0.047. The molecular structure is built from discrete binuclear molecules of Hf₂(OH)₂(hfac)₆ composition; the Hf...Hf distance in dimer is 3.533 Å. The structural units are connected by van der Waals interactions in the crystal.