Simultaneous quantification of leukotrienes and hydroxyeicosatetraenoic acids in cell culture medium using liquid chromatography/tandem mass spectrometry

Leukotrienes (LTs) and hydroxyeicosatetraenoic acids (HETEs) are important bioactive lipid mediators that participate in various pathophysiological processes. To advance understanding of the mechanisms that regulate these mediators in physiological and pathological processes, an analytical method using liquid chromatography/tandem mass spectrometry for the simultaneous quantification of LTB₄, LTC₄, LTD₄, LTE₄, 5‐HETE_, 8‐HETE, 12‐HETE and 15‐HETE in cell culture media was developed. A Supel?‐Select HLB solid‐phase extraction cartridge was used for sample preparation. The compounds were separated on a C₁₈ column using gradient elution with acetonitrile–water–formic acid (20:80:0.1, v/v/v) and acetonitrile–formic acid (100:0.1, v/v). The calibration curves of LTB₄, LTD₄, LTE₄ and HETEs were linear in the range of 0.025–10 ng/mL, and the calibration curve of LTC₄ was linear in the range of 0.25–10 ng/mL. Validation assessment showed that the method was highly reliable with good accuracy and precision. The stability of LTs and HETEs was also investigated. Using the developed method, we measured LTs and HETEs in the culture supernatant of the human mast cell line HMC‐1. The present method could facilitate investigations of the mechanisms that regulate the production, release and signaling of LTs and HETEs. Copyright © 2014 John Wiley & Sons, Ltd.     

System Identification Models of the Equivalent Permittivity for Rain Medium

The dielectric constant for rain medium is investigated by utilizing the system identification method. The rain rate model and frequency model of permittivity in millimeter waves band for rain medium are presented. The results obtained with models are in very good agreement with references in calculating the attenuation of electromagnetic waves induced by rain, which Shows that the obtained models are valid and practicable. The cross-polar discrimination gotten with rain rate model is in agreement with references.     

Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004     

Diffusion in poro‐plastic media

A model is developed for the flow of a slightly compressible fluid through a saturated inelastic porous medium. The initial‐boundary‐value problem is a system that consists of the diffusion equation for the fluid coupled to the momentum equation for the porous solid together with a constitutive law which includes a possibly hysteretic relation of elasto‐visco‐plastic type. The variational form of this problem in Hilbert space is a non‐linear evolution equation for which the existence and uniqueness of a global strong solution is proved by means of monotonicity methods. Various degenerate situations are permitted, such as incompressible fluid, negligible porosity, or a quasi‐static momentum equation. The essential sufficient conditions for the well‐posedness of the system consist of an ellipticity condition on the term for diffusion of fluid and either a viscous or a hardening assumption in the constitutive relation for the porous solid. Copyright © 2004 John Wiley & Sons, Ltd.     

Refraction of light in media

The roles of the magnetic field and electric field of the light are investigated when the light is refracted in the medium. The model of the electron cloud conductor is presented. Electron cloud in a molecule is treated as a conductor and the Faraday’s Law is applied to this conductor that is in the alternating magnetic field of the light. dB _M/dt of the light gives rise to an alternating induced current on the electron cloud conductor, and the light exchanges energy, i.e. the refractive energy, with the electron cloud conductor. Formulas of refractive index, which is the ratio of light speed in vacuum to that in the medium, are derived with this model. These formulas are tested with several mediums and Langevin’s diamagnetic susceptibility of helium gas, and the results are in good agreement with the measured data. The anisotropy and the nonlinearity of the refractive index are explained with the theory described in this work. Supported by Beijing Science and Technology New Star Program (Grant No. 952870400), the Beijing Municipal Commission of Education and the Excellent Young Teachers Program of Ministry of Education of China     

Analysis of combined conduction and radiation heat transfer in presence of participating medium by the development of hybrid method

The current study addresses the mathematical modeling aspects of coupled conductive and radiative heat transfer in the presence of absorbing, emitting and isotropic scattering gray medium within two-dimensional square enclosure. A blended method where the concepts of modified differential approximation employed by combining discrete ordinate method and spherical harmonics method, has been developed for modeling the radiative transport equation. The gray participating medium is bounded by isothermal walls of two-dimensional enclosure which are considered to be opaque, diffuse and gray. The effect of various influencing parameters i.e., radiation-conduction parameter, surface emissivity, single scattering albedo and optical thickness has been illustrated. The adaptability of the present method has also been addressed.     

Comparative Study on Large and Small Signal Theory for Intensity Modulation Response of Semiconductor Lasers Including Higher-Order Dispersion Terms

In this article, the comparison of large signal theory and small signal theory has been done with dispersive propagation of optical signal with IMDD (Intensity Modulation Direct Detection) systems for semiconductor lasers with higher-order dispersion terms. The expressions for an exact large signal theory and small signal theory including higher-order dispersion terms for propagation of an optical wave with sinusoidal amplitude and frequency modulation in a dispersive fiber have been derived. It is observed that small signal theory is more sensitive compared to large signal theory in terms of intensity modulation/direct detection systems. Also, it is reported that for large signal analysis the higher-order effects of dispersion can be ignored, whereas for small signal theory, the higher-order effects can be ignored for lower modulation frequencies only. The variation in the transfer function for various values of modulation indices are greater for small signal analysis than for large signal analysis. Also, as the intensity modulation index is increased, there is a decrease in the value of transfer function. The large signal model approximates the small signal model for lower values of the intensity modulation index.     

An inverse radiative transfer problem of simultaneously estimating profiles of temperature and radiative parameters from boundary intensity and temperature measurements

A parallel-plane space filled with absorbing, emitting, isotropically scattering, gray medium is studied in this paper. The boundary intensity and boundary temperature profiles are calculated for the inverse analysis. For the simultaneous estimation of temperature, absorption and scattering coefficient profiles in the medium, the sum of residuals of boundary intensity and temperature after being weighted by a balance factor is minimized through using a Newton-type iteration algorithm and the least-squares method. To avoid over-updating for the parameters, the relative updating magnitude during the iteration process is constrained not to be >0.5. It is shown that the boundary intensity measurement alone is not enough to estimate simultaneously the temperature (source) and the radiative properties (both absorption and scattering coefficients) when the measurement data contain sensitive random errors. The boundary temperature measurement can serve as a necessary supplementation to the boundary intensity to make this kind of inverse radiative transfer problem resolvable. It was shown that a compensation relationship between absorption and scattering coefficients makes it difficult to fix them accurately. Parabolic profiles for the three parameters are used to validate the estimation method. When the optical thickness approaches 4.0, the results for the radiative properties are not acceptable, although the result for temperature profile is reasonable. This means the method needs further improvements.     

Application of the finite Hankel transform to a diffusion problem without azimuthal symmetry

The problem treated in this paper concerns calculating the evolution of the pressure in a single-phase, slightly compressible fluid in a porous medium consisting of communicating layers. The fluid is produced through a point sink located on the side of an otherwise sealed cylindrical wellbore. This location of the sink causes the flow around the wellbore to be azimuthally asymmetric.The problem is solved through successive application of Laplace, finite Fourier and finite Hankel transforms. Although apparently straightforward, this approach leads to serious numerical difficulties. The published form of the inversion formula for the finite Hankel transform leads to inaccurate computation for the higher azimuthal modes even with 128 bit arithmetic. An alternative form is developed which enables accurate evaluation of the solution with the more practical 64 bit arithmetic. The technique for two-layer solution presented here can be directly extended to a problem with a larger number of communicating layers. This is the first instance of successful application of the finite Hankel transform to an azimuthally asymmetric diffusion problem.