A compact shock-assisted free-piston driver for impulse facilities

A free-piston driver that employs entropy-raising shock processes with diaphragm rupture has been constructed, which promises significant theoretical advantages over isentropic compression. Results from a range of conditions with helium and argon driver gases are reported. Significant performance gains were achieved in some test cases. Heat losses are shown to have a strong effect on driver processes. Measurements compare well with predictions from a quasi-one-dimensional numerical code. Received 7 September 1996 / Accepted 5 October 1996     

遥感器CCD驱动器热设计及其在摄像过程中的温度变化

CCD驱动器是航天成像遥感器摄像过程中的主要热源之一。防止CCD驱动器过热是保证其正常工作的重要方面。介绍了遥感器的工作模式和对CCD驱动器采取的热控制措施。通过热平衡试验,利用回归的方法,对CCD驱动器在摄像过程中的温度变化规律进行了分析,同时对热控制效果进行了评估。CCD驱动器工作时升温速率在0.85℃/min左右,整个摄像过程中最高温度约为26℃,所实施的热控制措施效果理想。     

IPv4/IPv6翻译网关的研究

In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

出租车司机社会贡献评价方法研究

出租车司机的社会贡献对于促进城市经济发展和社会进步具有重要的作用,评价出租车司机的社会贡献是激励出租车司机多做社会贡献的重要手段。为了评价出租车司机的社会贡献,本文提出了一种基于实际出租车运营数据的评价方法。本文设计了运营特性、重点区域、恶劣天气、大事件四个体现司机社会贡献的指标,以此构建了出租车司机社会贡献评价指标体系,进而选用了主观赋权法G1法和客观赋权法拉开档次法相结合的赋权方式对指标赋权,并选择四种评价信息集结方法建立了出租车司机社会贡献评价模型。最后,通过实际的出租车运营数据验证了本方法的可行性。本文为评价出租车司机社会贡献提供了一种研究思路和方法,并对政府政策的制定和企业策略的实施具有一定的启示。     

开关放电分散性对FLTD模块输出的影响模拟

建立了包含开关放电分散性的电路模型,模型通过电压控制开关和自击穿开关模型的结合,可对开关抖动及支路间放电的相互影响进行模拟,利用研制的300 kA单级直线型变压器驱动源(FLTD)模块进行了实验验证,模拟结果与实验相吻合。进而针对设计的20支路FLTD模块建立了电路模型,模拟分析了模块支路开关放电分散性对输出电流峰值和上升沿的影响,模拟结果表明,开关抖动小于5 ns时对模块输出影响较小。     

±100 kV三电极场畸变气体火花开关

设计了一种用于直线变压器驱动源的三电极场畸变气体火花开关。开关采用SF6气体绝缘,开关尺寸和电感较小,实测开关电感约为67 nH。在工作电压80 kV、工作系数为70%时,开关触发时延为40.0 ns,抖动约2.8 ns。对比研究了钨铜合金和黄铜两种电极材料对开关静态和触发击穿特性的影响,研究结果表明：铜钨合金电极开关的自击穿电压分散性、触发时延及抖动、自放电概率和电极表面烧蚀均小于黄铜电极,更适宜作为三电极场畸变开关的电极材料。     

20 MA/300 ns Marx型直接驱动Z箍缩脉冲源

基于金属外壳1.0 F/40 nH/100 kV的电容器和100 kV/200 kA气体开关,提出了电流20 MA、前沿300 ns Marx型直接驱动Z箍缩负载的脉冲功率源概念设想,共40路并联,每路为6个Marx并联驱动一条水介质传输线, Marx为18级串联。分析了关键单元（电容器和气体开关）的技术可行性,建立了PSpice电路模型,模拟计算了Marx建立时间分散性、水介质传输线阻抗对负载电流的影响,模拟结果表明：Marx建立时间分散性从10 ns增加到60 ns时,负载电流前沿从平均282 ns增加到287 ns,峰值从21.0 MA降低到19.8 MA,脉宽几乎不变;Marx建立时间分散性对负载电流的影响随着并联数目增加变小;采用4.2 等阻抗传输线,负载电流最大。     

线性变压器源驱动相对论速调管放大器的初步实验

利用新研制的紧凑型线性变压器驱动源（LTD）脉冲功率源二极管产生的电子束源,开展了S波段长脉冲相对论速调管放大器（RKA）的初步实验研究。采用无箔空心阴极和0.9 T恒流源引导磁场从LTD二极管引出了电压600 kV、束流6 kA、脉宽150 ns的环形电子束,该电子束经过1个同轴输入腔和2个同轴调制腔的调制后,产生了幅度5 kA、脉宽110 ns的基波调制束流,采用该调制束流驱动同轴微波提取腔,辐射输出了峰值功率820 MW/110 ns的辐射微波,效率28％,增益36 dB。同时,开展了重复脉冲RKA和相位特性的实验研究,重复频率10 Hz运行时,辐射微波达到800 MW/100 ns,相位抖动小于 20°。     

PW级Ｚ箍缩驱动源指数传输线的电路模拟

采用PSPICE软件,以PW级Z箍缩驱动源指数传输线为例,模拟分析了用有限多段分段阶跃变阻抗传输线序列模拟连续指数变阻抗传输线时,直角波、半周期正弦、全周期正弦平方等入射脉冲的电压和功率传输效率与分段数以及脉冲参数的关系,并计算了水电阻率对功率传输效率的影响。模拟结果表明：直角波波头的电压和功率传输效率随分段数增大而迅速趋近于理想传输线变压器的值;但对于非直角波入射脉冲而言,分段数并非越多越好,而是存在一个与传输线电长度和输入脉冲波前时间相应的最佳值;随着水电阻率下降,功率传输效率加速降低。