Decomposition mechanism of triethylindium (TEI) on a GaP(0 0 1)-(2×1) surface studied by LEED, AES, TPD and HREELS

Adsorption and decomposition of triethylindium (TEI: (C₂H₅)₃In) on a GaP(0 0 1)-(2×1) surface have been studied by low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). It is found from the TPD result that ethyl radical and ethylene are evolved at about 300–400 and 450–550 K, respectively, as decomposition products of TEI on the surface. This result is quite different from that on the GaP(0 0 1)-(2×4) surface. The activation energy of desorption of ethyl radical is estimated to be about 93 kJ/mol. It is suggested that TEI is adsorbed molecularly on the surface at 100 K and that some of TEI molecules are dissociated into C₂H₅ to form P–C₂H₅ bonds at 300 K. The vibration modes related to ethyl group are decreased in intensity at about 300–400 and 450–550 K, which is consistent with the TPD result. The TEI molecules (including mono- and di-ethylindium) are not evolved from the surface. Based on the TPD and HREELS results, the decomposition mechanism of TEI on the GaP(0 0 1)-(2×1) surface is discussed and compared with that on the (2×4) surface.     

甲烷分子在碱性催化剂上的吸附与酸碱活化机理

以碳酸锶为甲烷吸附活化的模型催化剂，用切换变应答、ＣＨ４（ＣＯ２）－ＴＰＤ等技术，对甲烷的吸附、碱性对催化剂性能的影响进行了研究，结果表明，甲烷在碳酸锶上的活化显示出明显的酸碱活化机理特征，瞬变应答及ＴＰＤ结果均证明，甲烷在碳酸锶表面有较强的吸附，其脱附温度约３１０℃，关联结果表明，甲烷转化率及Ｃ２烃收率与催化剂表面ＳｒＯ碱性中心浓度有非常一致的顺变关系，因此催化剂表面的酸碱中心可能是甲烷的选择活     

分子筛笼内金属羰基簇合物的热稳定性研究

本实验采用戊马比妥钠诱发豚鼠和家兔急性心力衰竭模型，观察了舒心丸的治疗作用。结果表明，舒心丸ｉｖ能明显升高心衰豚鼠的心脏收缩幅度和心衰家兔的Ｂｐ，ＬＶＰ，ＬＶ±ｄｐ／ｄｔ和ＣＯ。其作用与哇巴因相似。     

稀土添加剂对烃类水蒸汽重整镍催化剂性能的影响——水蒸汽吸附的TPD研究

用程序升温脱附技术,研究了添加稀土的烃类水蒸汽重整催化剂(Ni/α-Al_2O_3)对水蒸汽的吸附性能,同未加稀土的镍催化剂作了对比。结果表明,加有稀土的镍催化剂对水蒸汽的吸附能力主要是稀土的贡献。还原态催化剂对水蒸汽的吸附量比相应的氧化态多1.4倍。发现催化剂对水蒸汽的吸附能力不仅取决于浸渍方式,而且同稀土含量有关。当稀土含量较多时,催化剂表面上呈现出三个能量不同的吸附位。稀土含量少于1.3%时。对提高催化剂吸附水蒸汽的能力已作用不大。含稀土的镍催化剂吸附水蒸汽的能力大,正是其抗结炭性能耐硫性能好的原因。     

过渡金属钼钒砷杂多化合物的合成与TPR,TPD研究

Seven transition metal molybdovanadoarsenic heteropoly compounds have been synthesized and characterized using IR, UV, TG-DTA, pH potential titration techniques. The molecular formulae of these compounds are pro-posed to be H_xM_yAsMO₁₀V₂O₄₀·zH₂O(x=1～3, y=1,2, M=Cr, Mn, Fe, Co, Ni, Cu, Zn).They are all keggin structure. Surface nature of these compounds have been investigated by temperature programmed desorption and temperature programmed reduction techniques. NH₃-TPD results show that in TPD profiles of the compounds there are two desorption peaks corresponding to weak acid sites of desorption, respectively. Desorbing activativon energy and preexponential factor of weak acid site of desorption for compounds have been calculated. H₂-TPR re-sults show that introducting transtion metal to molybdovanarsenic acid, the reduction peak temperatures of H₂-TPR shift regularly with increasing d electron numbers of transition metals. In addition, Zn and Cu heteropoly com-pounds have yet apparent effect of hydrogen spill over.     

掺杂SrTiO3体系上甲烷氧化偶联反应的研究—活性氧物种的作用

本文采用循环氧化还原法,脉冲反应及TPD等实验手段对钙钛矿型氧化物掺杂SrTiO_3体系上甲烷氧化偶联反应中的活性氧物种的作用进行了研究.结果表明,催化剂由于掺杂产生的未被充分还原的氧物种(O~(α-)(0<α<2)是活化甲烷并促使其发生偶联反应的主要的活性中心,而表面晶格氧(O_L~(2-))则主要使甲烷深度氧化;消耗掉的未被充分还原的氧或晶格氧可以在高温下氧气氛中氧化复原.对于掺杂的SrTiO_3样品,体相中的氧在惰性气氛或还原气氛中可以向表面扩散.吸附氧可能不直接与甲烷作用而主要通过催化剂表面活性氧物种(O~(α-)或O_L~(2-))而起作用.     

XPS,AFM, ATR and TPD evidence for terraced,dihydrogen terminated, 1×1 (100) silicon

Heating (100) silicon at high temperature (say, higher than 850 °C) in H₂, cooling to 670–700 °C in the same ambient, and quenching to room temperature in N₂ results in environmentally robust, terraced 1 × 1 (100) SiH₂. Evidence for this conclusion is based on angle‐resolved x‐ray photoelectron spectroscopy, atomic force microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, thermal programmed desorption, and reflection high‐energy electron diffraction. Copyright © 2005 John Wiley & Sons, Ltd.     

Evolution of water vapor from indium-tin-oxide transparent conducting films fabricated by dip coating process

Tin-doped indium oxide In₂O₃ (indium-tin-oxide) transparent conducting films were fabricated on silicon substrates by a dip coating process. The thermal analysis of the ITO films was executed by temperature-programmed desorption (TPD) or thermal desorption spectroscopy (TDS) in high vacuum. Gas evolution from the ITO film mainly consisted of water vapor. The total amount of evolved water vapor increased on increasing the film thickness from approx. 25 to 250 nm and decreased by increasing the preparation temperature from 365 to 600°C and by annealing at the same temperature for extra 10 h. The evolution occurred via two steps; the peak temperatures for 250 nm thick films were approx. 100-120 and 205-215°C. The 25 nm thick films evolved water vapor at much higher temperatures; a shoulder at approx. 150-165°C and a peak at approx. 242°C were observed. The evolution temperatures increased by increasing the preparation and the annealing temperatures except in case of the second peak of the 25 nm thick films. The evolution of water vapor at high temperature was tentatively attributed to thermal decomposition of indium hydroxide, In(OH)₃, formed on the surface of the nm-sized ITO particles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.