ICP-AES同时测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴

采用ICP－AES法测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴元素含量，并对样品的溶解酸和酸用量、元素分析线的选择以及共存元素间的干扰进行了研究。该法简便、快速，精密度和准确度较好。     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Co(III)氮芥配合物的合成、表征及其抗肿瘤活性的初步评价

低氧条件下,钴(Ⅲ)的氮芥配合物具有合适的还原电位,就可能还原得到比较活泼的Ｃｏ(Ⅱ)配合物,在溶液中其活性配体很快被体内的小分子取代,释放出的活性配体可以杀死低氧区内外的癌细胞,因此筛选合适的钴配合物作为低氧选择性抗癌药物的研究很有意义。本文以双 (2 氯乙基)胺(简称ＢＣＡ)为活性配体,取代乙酰丙酮为辅助配体,合成一系列Ｃｏ(Ⅲ)配合物(下图)。初步评估结果表明,其中两个配合物具有一定的低氧选择性,配合物的还原电位对药物的低氧选择性影响很大,合适的还原范围可能比较窄。1　实验部分1.1　试剂与仪器按文献[1]的方法合成…     

[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

Ein neues Kupfercobaltboratoxid mit isolierten B2O5-Baugruppen: Cu2Co(B2O5)O

On a New Copper Cobalt Borate Oxide with Isolated B₂O₅ Units: Cu₂Co(B₂O₅)O Single crystals of a new compound with the empirical formula Cu₂CoB₂O₆ were obtained by using a B₂O₃ flux technique. X-ray single crystal technique led to a new structure type. Cu₂CoB₂O₆ crystallizes monoclinic, space group C-P2₁/c (No. 14); a = 3.2250(6); b = 14.847(1); c = 9.1171(6) Å; β = 93.67°; Z = 4. All metal sites are octahedrally coordinated and form a two dimensional framework consisting of edge sharing octahedra ribbons. In addition one observes isolated B₂O₅-units and oxygen which is not coordinated to boron. The far relation to the crystal structure of the mineral Warwickite is illustrated.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

Based on MFe2O4 (M=Co,Cu, and Ni): Magnetically recoverable nanocatalysts in synthesis of heterocyclic structural scaffolds

Abstract

Catalysis research under magnetically recoverable nanocatalysts is a well-known topic in organic synthesis. In recent times, catalysis research has clearly experienced a renaissance in the area of utility of ferrite nanoparticles based on their ability to recovery and reusability. In this review, the focus is on the fabrication, characterization and of application the MFe₂O₄ (M=Co, Cu, and Ni) nanocatalysts in synthesis of heterocyclic structural scaffolds.