An estimation of the measurement uncertainty for an optical emission spectrometric method

 A validation procedure based on the ISO/IEC 17025 standard was used to demonstrate the long-term stability of a calibration process and to assess the measurement uncertainty of a standard test method for optical emission vacuum spectrometric analysis of carbon and low-alloy steel (ASTM E 415–99a). The validation was used to provide documented evidence that the selected method fulfils the requirements and that the method is ”fit for purpose”. A test for drift was applied to determine statistically whether the analytical results vary systematically with time. The accuracy and traceability of the optimised method were tested by an analysis of closely matched matrix certified reference materials (CRMs). The measurement uncertainty estimations took account of the precision study, the bias and its uncertainty, and the qualification of uncertainties not considered in the overall performance studies. Received: 2 November 2002 Accepted: 2 January 2003 Acknowledgement The author expresses gratitude to Dr. Aleš Fajgelj for helpful discussions during the 3rd Central European Conference on Reference Materials and Measurements. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to T. Drglin     

用光学多道分析器测定RH的不确定度评定

本文使用光学多道分析器测定了氢原子光谱的计Hα、Hβ、Hγ、Hδ,谱线波长,利用最小二乘法处理测量数据：建立了测量数学模型,得到氢原子光谱里德伯常量RH,按国家计量技术规范JJF1059—1999标准对测量的不确定度进行了分析与评定。     

高成像质量Offner成像光谱仪的理论分析与研制

以双镜系统为基础构建了Offner成像光谱仪,并利用光程函数来获得一种Offner成像光谱仪的初始结构.通过光学设计软件Code V对该初始结构进行了仿真与优化,优化后的光谱仪具有高成像质量,其均方根点列图直径明显降低,调制传递函数曲线在子午像与弧矢像上都获得了好的成像效果.该研究免去了过于复杂的像差推导过程,并在宽光谱400~1 300nm条件下获得了具有高成像质量的Offner光谱仪结构,为光谱仪的搭建提供了理论基础.     

Analysis of the lateral displacement and optical path difference in wide-field-of-view polarization interference imaging spectrometer

The mechanism of beam splitting and principle of wide-field-of-view compensation of modified Savart polariscope in the wide-field-of-view polarization interference imaging spectrometer (WPIIS) are analyzed and discussed. Formulas for the lateral displacement and optical path difference (OPD) produced by the modified Savart polariscope are derived by ray-tracing method. The theoretical and practical guidance is thereby provided for the study, design, modulation, experiment and engineering of the polarization interference imaging spectrometers and other birefringent Fourier-transform spectrometers based on Savart polariscopes.     

Comparison of responses of LR-115A, CR-39 and PM-355 track detectors to pulsed low-energy proton streams

The paper concerns applications of LR-115A, CR-39 and PM-355 solid-state nuclear-track detectors (SSNTDs) for investigation of pulsed fluxes of protons below 300 keV. The proton streams were generated by the RPI-IBIS device operated with hydrogen puffing [Baranowski et al. 2000. Studies of hydrogen discharges in RPI-type devices with different electrode configurations. Czech. J. Phys. 50 (Suppl. S3), 101–107]. To perform ion mass- and energy-analysis, a Thomson mass-spectrometer equipped with a special input system and exchangeable detectors was used. A quantitative analysis of proton tracks upon Thomson parabolas was performed by means of an optical microscope equipped with a CCD camera. It made possible to measure proton tracks and to determine their statistics. The paper presents proton energy spectra recorded with the selected detectors, and responses of these detectors to protons of energy from about 30 to 300 keV. The results are important for verification of detector characteristics and for measurements of protons at different experimental conditions.     

嫦娥一号干涉成像光谱仪(IIM)2C级数据信息提取

通过分析Chang’E-1卫星所获取的高光谱数据的太阳高度角因素,选取了太阳高度角较高的IIM2C数据进行光谱定标。采用邻域平均法及邻域加权均值法对原始数据进行了杂点、条带修复。由于干涉成像光谱仪CCD阵列增益畸变以及它的自身问题使得干涉影像存在横向响应不均一性,提出采用基于子空间最大特征值法进行校正,结果影像亮度统计其强度表现均一,符合自然图像特征,并采用自编程序进行几何校正。运用国际上较为成熟的经验线性法对Chang’E-1IIM 2C数据进行绝对定标;与此同时,为了修正线性定标的偏置系数及降低数据噪声,首次采用自适应小波变换法对辐射定标后数据进行后处理,确定了IIM2C数据可用波段。通过对比国际标准定标点数据,制订了嫦娥IIM2C数据分析方案,完成了第一幅完整的Chang’E-1IIM 2C月球正面反射率影像。     

甲基异丁酮萃取-原子荧光光谱法间接测定碘

在硝酸浓度为0.1mol.L-1介质中,I-和Hg2+能生成稳定的化合物,被甲基异丁酮萃取,原子荧光光谱法测定有机相中的汞,间接得到碘的含量。工作考察了萃取条件以及其他影响因素。在优化的实验条件下,碘的含量在0～12μg.L-1范围内呈良好的线性关系,方法的检出限是0.14μg.L-1,相对标准偏差3.3%,对蛋类样品加标回收率为101.8%～110.4%。     

激光诱导等离子体光谱技术的实验装置进展

简述了近几年来国内外激光诱导等离子体技术的发展情况,着重从实验装置的几个方面进行分析,包括激光能源、采光装置、接收装置。另外对双路脉冲激光蒸发、激发技术进行了简短的讨论。     

基于多级微反射镜的时空联合调制傅里叶变换成像光谱仪:原理及数据处理

介绍了一种基于多级阶梯微反射镜的时空联合调制傅里叶变换成像光谱仪的原理及数据处理方法.仪器利用一块多级阶梯微反射镜取代传统迈克尔逊干涉仪中的动镜以实现静态干涉,通过摆镜扫描使目标物体成像在不同的子阶梯反射面上从而获得目标物体不同光程差的干涉信息.某一时刻,目标物体经摆镜与前置成像系统后在平面镜与多级阶梯微反射镜上形成两个一次像点,两个一次像点被平面镜和多级阶梯微反射镜反射之后经后置成像系统最终成像在探测器焦平面上.平面镜与多级阶梯微反射镜之间的高度差会使到达探测器的两束光的光程差不同,因此探测器焦平面上可以获得目标物体的二维空间信息及一维干涉信息.根据多级阶梯微反射镜参数及光学系统设计参数计算得到摆镜步进角度为0.095°.利用实验获得的三维数据立方体进行了图像拼接与光谱复原.针对子阶梯反射镜存在宽度差异的问题,提出了一种基于极坐标霍夫变换的图像分割方法.为缓解拼接全景图中的间断线效应,将图像变换到HSI颜色空间并插值拟合其亮度分量后再变换回原空间.对拼接后的干涉图像进行了降维、去直流、寻址、切趾、相位校正、傅里叶变换及光谱分辨率增强等处理,完成了光谱复原工作.复原光谱分辨率为194 cm-1,优于设计指标(250 cm-1).     

先进焦平面与光谱成像技术现状

深入分析先进的焦平面技术和光谱成像技术的发展趋势,为探测器及光谱成像仪的研究提供参考。对光谱成像技术的现状和发展趋势、焦平面技术、先进焦平面技术对光谱成像系统技术的推动作用三个方面进行详细的分析总结,认为焦平面技术向着高性能、大规模面阵规格、高灵敏度、宽谱响应的方向发展;并推动光谱成像系统向着高分辨率、宽幅、多波段、更短重访周期和简化系统方向发展。成像光谱仪的发展趋势和需求指明焦平面技术的发展方向,同时焦平面技术的发展也会引领成像光谱仪系统进步和革新。