Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

A novel and simple two-frequency Brillouin fiber laser is presented. It is based on a fiber Fabry-Perot cavity with fiber Bragg gratings as reflectors. The model of stimulated Brillouin scattering in fiber grating-based Fabry-Perot resonator is investigated. The laser allows conversion efficiency of close to 100% and suppresses the higher-order Stokes waves. The theoretical prediction is presented and the experimental demonstration is realized.     

高功率LDA紧密侧面抽运Nd:YLF两级双程离轴放大系统实验研究

 介绍了一台10mm口径两级双程离轴放大系统，实现了对5mm×5mm口径光束的激光放大，耦合系统采用高功率LDA紧密侧面直接抽运棒状Nd:YLF方式。分析并实验研究了在不同抽运电流、放大脉冲与放大器LDA抽运时刻的不同延时及不同注入能量条件下，放大系统及光束每次放大时放大特性的规律。实验得到：在放大系统5mm×5mm软光阑处注入1.58mJ能量时，放大系统可输出129.2mJ能量，能量提取效率达到19.5%，满足该系统的设计指标。     

Phase and Amplitude Characteristics of Injection Lasers with Allowance for the Effects of Nonlinear Amplification in Current Modulation

The influence of the parameter of amplitude-phase coupling for nonlinear amplification on the phase-frequency characteristics of an injection laser in the regime of pumping current modulation has been investigated theoretically. The parameter is defined as the coefficient of proportionality between changes in the real and imaginary parts of the refractive index during variation of the density of photons in the cavity. The substantial dependence of the coefficient of phase modulation on the parameter of the amplitude-phase coupling for nonlinear amplification at small modulation frequencies is shown. A technique to determine the indicated parameter based on the frequency dependence of the ratio between the coefficients of phase and amplitude modulation is suggested.     

Noncollinear optical parametric amplification in lithium triborate seeded by a cw Ti:sapphire laser

Experimental investigations of a type-I noncollinear phase-matched optical parametric amplification based on lithium triborate, which was pumped by a 5-ns second-harmonic pulses from a Q-switched Nd:YAG, seeded by a cw Ti:sapphire laser at 800 nm, was presented. The experiments generated 2-ns signal output pulses at 800 nm, the maximum signal output pulse energy reached 19 μJ, the corresponding parametric gain was 44 dB. Furthermore, the experiments demonstrate that the 65 nm-FWHM parametric fluorescence gain spectrum could also be observed. A quantitative account of the ultrabroadband parametric fluorescence gain spectrum was given with our theory. The experimental measurements are in agreement with theoretical calculations.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Shot noise sets the limit of quantification in electrochemical measurements

Detection of single molecules, particles, and rapid redox events is a challenge of electrochemical investigations and requires either an amplification strategy or significant averaging for the electrochemical current to exceed the noise level. We consider the minimum number of electrons required to reach the limit of quantification in these electrochemical measurements. A survey of the literature indicates that the state-of-the-art limit in current detection for different types of measurements (e.g. voltammetry, single-molecule redox cycling, ion channel recordings of single molecules, metal nanoparticle collision, and phase nucleation) is independent of the nature of the measurement and increases linearly with reciprocal response time, Δt^?1, over ～5 orders of magnitude (from ～10 to ～10⁶ s^?1). We demonstrate that the practical limit of quantification requires cumulative measurement of ～2100 electrons during Δt and is determined by statistics of counting electrons, that is, the shot noise in the current.     

聚丙烯表面的生物相容性修饰: 表面氨基放大还原胺化接枝磷酰胆碱

在氨气氛中对聚丙烯薄膜表面进行等离子处理, 获得了不同浓度的表面氨基. 表面氨基的数量经1,6-己二异氰酸酯键合三(2-氨乙基)胺可成倍增加. 用还原胺化法将磷酰胆碱醛共价接枝到表面氨基上获得了磷酰胆碱改性的聚丙烯薄膜. X射线光电子能谱(XPS)测定结果表明, 接枝磷酰胆碱基团的表面覆盖率可达20%～40%. 衰减全反射傅立叶变换红外(ATR-FTIR)和动态接触角测定结果也都说明磷酸胆碱基团被成功地接枝于聚丙烯表面. 还原胺化法结合等离子处理及表面氨基放大技术, 有望成为获取新型生物材料的一种有效途径.     

On the role of localized molecular orbitals in the formation of bond dipoles

The hypothesis of the classical chemistry about bond dipoles resulting from shifts of separate pairs of electrons is proved using the non-canonical method of molecular orbitals (MOs). To this end, a relation is sought between the total charge distribution inside an individual chemical bond of a polyatomic molecule and the square of the respective single localized MO (LMO). General expressions for these MOs are obtained directly on the basis of the Brillouin theorem without invoking additional localization criteria. The two characteristics under comparison are presented in an explicit algebraic form in terms of meaningful components. Reshaping of square of the ‘own’ LMO of the given bond is shown to play the decisive role in the formation of secondary dipoles of initially homopolar bonds (e.g. of C–C and C–H bonds in substituted alkanes), as well as of bonds of relatively low initial polarity. Thus, representability of these dipoles by shifts of the ‘own’ pairs of electrons of respective bonds is supported. For bonds of a high initial polarity, the secondary dipoles are shown to originate mainly from contributions of LMOs of other bonds extending over the antibonding basis orbital of the given bond. Moreover, the actual secondary bond dipole takes an opposite direction vs. that predicted by the shift of the respective ‘own’ pair of electrons in this case. The latter result serves to account for the known low nucleofugality of highly electronegative heteroatoms in the S_N2 reactions.