Summary of ISO/TC 201 Standard: ISO 22415—Surface chemical analysis—Secondary ion mass spectrometry—Method for determining yield volume in argon cluster sputter depth profiling of organic materials

The International Standard ISO 22415 provides methods to measure sputtering yield volumes of organic test materials using argon cluster ions. The test materials should consist of thin films of known thicknesses between 50 and 1000 nm. The format of the test materials, the measurement of sputtering ion dose, sputtered depth, and reporting requirements for sputtering yield volumes are described.     

氯化铜的少溶剂固态连串配位化学反应

在少量水的存在下,由于 NH₄[CuCl₃]对水不稳定,CuCl₂·2H₂O 与氯化铵的配位化学反应只能得到 1:2 产物(NH₄)₂[CuCl₄(H₂O)₂];但在无水乙醇中,无水 CuCl₂与氯化铵按 1:1或 1:2的物质的量之比混合时,能相应地得到 NH₄[CuCl₃]或(NH₄)₂[CuCl₄]。CuCl₂·2H₂O与 2,2''-联吡啶(bipy)的少溶剂固态化学反应仍能像固态化学反应一样,根据反应物的配比生成相应的唯一产物,但在物质的量之比为1:1的反应中发现1:2产物曾经形成。热力学分析说明,如果连串反应的后一步的Δ_rG^⊖大于前一步的,则上述反应现象是可能的。     

EPM-g-GMA接枝率的测定及其增韧PBT的力学性能和形态结构研究

在同向双螺杆挤出机中通过熔融接枝反应制备了EPM g GMA ,将其与PBT在转矩流变仪中熔融共混可以获得增韧的PBT工程塑料 .实验中EPM g GMA接枝率的测定采用红外工作曲线法 ,选用CCl4 做溶剂以避免溶剂对样品吸收峰的干扰 .随着EPM g GMA接枝率的增加 ,PBT EPM g GMA的缺口冲击强度相应提高 ,共混物中EPM g GMA的粒径尺寸减小 ,当EPM g GMA的接枝率为 4 7mL 1 0 0gEPM时 ,EPM g GMA的粒径尺寸可达 0 5 μm ,PBT EPM g GMA的缺口冲击强度达到 5 1 6kJ m2 ,是纯PBT的 3 1倍     

1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐的合成

以1－甲基吡咯为原料，通过酰化、硝化、酯化、还原、成盐等五步反应，合 成得到1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐，总产率20％左右。该法具有 原料便宜易得、操作简单、产物易于分离提纯等优点，有利于该化合物的大量制备 和应用。     

Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes

The most important variable affecting the yield in the coupling reactions of polymeric organolithium compounds with chlorosilane compounds has been investigated through size-exclusion chromatographic (SEC) analysis. The coupling reaction of poly(styryl)lithium with dichlorodimethylsilane as a silane-coupling agent provided 44 wt % of the coupling yield. The coupling yield, depending on the chain end reactivity of active polymers, was not greatly affected. The addition of a Lewis base such as N,N,N′,N′-tetramethylethylenediamine (TMEDA) even after complete polymerization of the dienes in hydrocarbon seems to affect the coupling reaction, resulting in decreasing the yield. The 1,2- or 3,4-enchain contents in the polydiene backbones affected the reduction of the linking efficiency in the coupling of the poly(dienyl)lithiums with chlorosilanes as the linking agent. The linking yields of the active polymers including over 75 mol % of 1,2- or 3,4-enchainment on the polydiene segment were below 20 wt %. The linking yields exhibited a dependence not only on the steric requirement of the chain end, but also the microstructure of the polydiene segment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1743–1753, 1998     

吖啶类衍生物的荧光性质

用比较法测得23种啶类衍生物的荧光量子效率（Φf)，以评估这些化合物的荧光性质，结果表明，N－烃基吖啶酮类化合物的荧光量子效率要比9－取代苯基吖啶类和9－取代苯亚甲基－10－甲基－9，10－二氢吖啶类化合物的荧光量子效率大，在非极性溶剂中，9－聚代苯亚甲基－9，10二氢吖啶分子内的强吸电子基NO2增强荧光量子效率，强推电子基OCH3降低荧光量子效率，这些测量结果与取代基的电子作用经验规律不相符，这种现象可以用分子内电荷转移理论进行解释。     

Tuning the Solid‐State Optical Properties of Tetracene Derivatives by Modification of the Alkyl Side‐Chains: Crystallochromy and the Highest Fluorescence Quantum Yield in Acenes Larger than Anthracene

In the solution state, there were no notable differences between the optical properties of a range of alkyl‐substituted tetracenes. However, in the solid state, their photophysical properties changed with respect to the length, shape, number, and substitution pattern of the alkyl side chains, as well as the distribution of two regioisomers. Remarkably, in the solid state, 1,4,7,10‐tetraisopropyltetracene exhibited the highest reported fluorescence quantum yield of any tetracene derivative (0.90). The changes in the optical characteristics of these tetracenes according to the arrangement of the tetracene rings and the color‐change mechanism in the solid state are discussed. Moreover, the world record in solid‐state fluorescence efficiency in acenes larger than anthracene is described. DOI 10.1002/tcr.201200003     

Structure and photochromism of 2-(<Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-arylaminomethylene)benzo[<Emphasis Type="Italic">b</Emphasis>]thiophen-3(2<Emphasis Type="Italic">H</Emphasis>)-ones

It was shown by electron absorption spectroscopy and X-ray diffraction analysis that steric strains in photochromic 2-(N-acyl-N-arylaminomethylene) benzo[b]thiophen-3(2H)-one molecules ortho-substituted in the N-phenyl ring increase the quantum yield of the N→O photoinduced rearrangement in accord with an increase in the steric constant of the ortho-substituent.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2151–2155, October, 2004.     

Thermal behaviour of ethynyl and ethenyl terminated imide resins

A series of ethynyl and ethenyl end-capped imide resins were synthesised by the reaction of 9,9-bis(4-aminophenyl) fluorene (BAF) with pyromellitic dianhydride (PMDA)3/3′, 4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and 3-ethynyl aniline/maleic anhydride. Structural characterisation was done by infra red and elemental analysis. Thermal characterisation was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperatures of cured resins were above 200°C in nitrogen atmosphere. Char yield at 800°C ranged from 59–65.5%.     

芴酮引发光接枝改性LDPE膜的研究

采用紫外光引发接枝表面改性的方法,以芴酮(FL)为引发剂,在低密度聚乙烯(LDPE)薄膜表面上接枝丙烯酸(AA)、甲基丙烯酸(MAA)、丙烯酸甲酯(MA)、甲基丙烯酸甲酯(MMA)、丙烯酰胺(AM)等单体,以赋予薄膜表面新的化学性质.考察了引发剂浓度、紫外光的辐照时间、辐照强度、单体种类对LDPE薄膜接枝程度的影响.结果表明,在一定范围内,增加芴酮浓度,可以提高单体的接枝率,但当芴酮浓度达到5%时,接枝率反而下降.延长辐照时间至4 min和提高紫外光的辐照强度达100 W/m2,均有利于接枝反应的进行.不同单体在LDPE膜上的接枝能力与单体的活性、单体与基材的相容性等因素有关.接枝后,LDPE与水的接触角下降程度不仅与单体在膜上的接枝量有关,还与接枝单体的亲水性能密切相关.