自由活塞斯特林发动机活塞位移测量

自由活塞斯特林发动机活塞往复振动位移对研究发动机特性具有重要意义,然而该类发动机活塞位于高压封闭腔体内且结构较为紧凑,其活塞往复振动位移难于直接进行测量。加速度传感器具有尺寸小、安装方便和工作稳定等特点,提出了采用加速度传感器测量活塞位移的方法。根据加速度传感器测量位移的原理,建立了一套加速度传感器测量自由活塞斯特林发动机活塞位移的标定试验系统,以位移传感器为基准测试并分析了不同活塞振幅和不同振动频率下加速度传感器测量位移的误差大小。实验结果表明,在活塞振幅小于8 mm,振动频率大于20 Hz条件下,加速度传感器测量位移的误差小于5%。因此加速度传感器可以用于测量自由活塞斯特林发动机的活塞往复运动位移。最后成功把加速度传感器测量的自由活塞斯特林发动机活塞振动位移用于发动机循环指示功的实验研究。     

Instantaneous work hardening behaviour of two-phase tungsten heavy alloys: a phenomenological approach

ABSTRACT

The present work describes a phenomenological approach to explain the instantaneous behaviour of tungsten heavy alloys (WHAs) in heat-treated and swaged conditions. The strengths and elongation values of heat-treated materials are lower and higher than those of the swaged samples respectively. The heat-treated materials exhibit two slopes in true stress–true plastic strain curves and follow the Ludwigson constitutive equation. On the other hand, swaged materials display a single slope and adhere to typical Swift constitutive equation. The latter reflect the presence of pre-strain in the materials due to swaging deformation. The fracture surfaces in heat-treated materials consist of W-W decohesion along with matrix rupture and W-cleavage, while swaged samples consist of mainly W-cleavage. Both the materials display three typical stages (I, II and III) of work hardening. The second derivatives of true stress–true plastic strain curves of these alloys exhibit a perfect parabola although the nature of true stress–true strain as well as true stress–true plastic strain curves is quite different in heat-treated and swaged materials. This has been observed for the first time in WHAs consisting of matrix and W-grains. The shape of the parabola is simple and easy to fit. The fitting parameters of parabolas have been successfully employed to explain the flow behaviour of a large number of tungsten heavy alloys having two-phase microstructure in different processing conditions.     

Quantum Coherences and Classical Inhomogeneities as Equivalent Thermodynamics Resources

Quantum energy coherences represent a thermodynamic resource, which can be exploited to extract energy from a thermal reservoir and deliver that energy as work. We argue that there exists a closely analogous classical thermodynamic resource, namely, energy-shell inhomogeneities in the phase space distribution of a system’s initial state. We compare the amount of work that can be obtained from quantum coherences with the amount that can be obtained from classical inhomogeneities, and find them to be equal in the semiclassical limit. We thus conclude that coherences do not provide a unique thermodynamic advantage of quantum systems over classical systems, in situations where a well-defined semiclassical correspondence exists.     

稀土X (X=La、Ce、Pr、Nd)修饰单层h-MoS2的NO气敏性

为提高h-MoS₂对NO的气敏性,采用第一性原理研究了X(X=La、Ce、Pr和Nd)对h-MoS₂的稳定性、吸附特性、功函数和伏安特性的影响.研究结果表明：X(X=La、Ce、Pr和Nd)取代Mo原子后得到的形成能均为负,说明掺杂体系容易形成且稳定存在.同时X掺杂后的h-MoS₂布居数相比于未掺杂前的大,也说明掺杂有利于体系稳定.NO吸附在La、Ce原子顶部位置的吸附能为-1.215 eV、-1.225 eV,吸附距离分别为2.475?、2.854?,具有明显的化学吸附特征.同时Hirshfeld转移电荷分别为0.213e和0.325e,具有明显的受体特征,提高了气敏性.La和Ce掺杂后能明显改变功函数的大小,也说明La和Ce能提高h-MoS₂对NO的气敏性.施加电场后能有效提高Pr掺杂体系的吸附强度,增大Hirshfeld转移电荷,对功函数的改变最大,所以电场对Pr掺杂体系的影响非常明显.通过分析掺杂体系的伏安特性曲线,La、Ce两掺杂体系的电流分别由0增大到5.3μA和4.8μA,而Pr、Nd...     

FS and FS(OH) defect centers at the MgO(1 0 0) surface: cluster and periodic calculations

We present a model of a new paramagnetic defect center which results from the interaction of atomic hydrogen with the MgO(1 0 0) surface. DFT calculations have been performed using periodic supercells and embedded cluster models where long-range polarization effects are included explicitly. The H atom promotes the creation of an oxygen vacancy (F center) by formation of the F_S⁺(OH⁻) defect where an hydroxyl group is adsorbed near an electron trapped in an oxygen vacancy. This new center has some characteristics similar to those of the classical F_S⁺ centers but a smaller formation energy; furthermore, being globally neutral, it can be treated also with supercell methods.     

非设计工况下1＋1／2对转涡轮性能研究

为了研究和改善1 1/2对转涡轮性能,本文对1 1/2对转涡轮两种转速下不同落压比共16种工况进行了数值研究,并与实验结果进行了对照.结果表明近设计工况下计算结果和实验值吻合较好.1 1/2对转涡轮出口背压对高压转子性能影响较小,对低压转子性能影响较大,这导致变工况下1 1/2对转涡轮高低压轴出功比变化较大.通过对某典型非设计工况和设计工况下的流场结构的分析发现非设计工况下1 1/2对转涡轮高压动叶中发生了明显的流动分离.高低压动叶不能很好地匹配,需要采取合理的流动控制措施去改善已有1 1/2对转涡轮的变工况性能.     

双稳系统的随机能量共振和作功效率

分析了处于双稳系统中的布朗粒子与外界的周期性外力和热随机力的功、热交互作用,建立了基于Langevin方程的随机能量平衡方程.围绕着受周期力、随机力和阻尼力共同作用的Langevin方程,采用动力学和非平衡热力学相结合的方法,从以"力"为立足点转到以"能量"为研究核心,深入分析了布朗粒子沿单一轨线运动时系统与环境之间的能量交换和作功效率,揭示了双稳系统的随机能量共振现象. 关键词： 双稳系统 随机能量共振 作功效率     

Ultraslow phonon-assisted collapse of tubular image states

We predict ultraslow collapse of “tubular image states” (TIS) on material surfaces. TIS are bound Rydberg-like electronic states formed at large distances (∼30 nm) from the surfaces of suspended circularly-symmetric nanowires, such as metallic C nanotubes. The states are formed in potential wells, resulting from a combination of the TIS-electron attraction to image charges in the nanotube and its centrifugal repulsion, caused by spinning around the tube. We demonstrate that TIS can collapse on the tube surface by passing their angular momentum l to circularly polarized flexural phonons excited in the tube. Our analysis shows that for highly detached TIS with l ? 6 the relaxation lifetimes are of the order of 10 ns-1 μs, while for l < 6 these lifetimes are reduced by several orders of magnitude.     

重建极性连续统理论的基本定律和原理(Ⅷ)——全功能原理

进一步阐明了现有极性连续统力学的能量守恒定律在理论上的不完整性．为能使之完整起见,提出了全功能原理及增率型全功能原理．通过对它们的全变分,即可分别得到虚位移-微转动和虚应力-偶应力原理及虚速度-角速度和虚应力率-偶应力率原理．从这些原理可以同时而且很自然推导出微极连续统力学的所有均衡方程和边界条件．所得到非传统结果与现有能量守恒定律问题存在的本质性差异作了说明．