线性唯象传热定律下光驱动发动机的最优路径

以存在热漏、摩擦等不可逆性,以双分子反应系统2SO3FS2O6F2为工质的光驱动发动机为研究对象,考虑工质与环境之间传热服从线性唯象传热定律[q∝Δ(T-1)],分别以输出功最大和熵产生最小为目标对整个循环活塞运动的最优路径进行研究.利用最优控制理论得出了活塞运动路径及工质温度的最优构型,给出了最优构型的数值算例,并与牛顿传热定律[q∝Δ(T)]下的最优构型进行了比较.     

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

研究了稀土复合变质对新型铸造热锻模具钢（CHD钢）组织与性能的组织。结果表明，稀土复合变质能细化晶粒，并且随着稀土量的增加。细化效果明显；加入适量的稀土复合变质后，夹杂物数量明显减少，夹杂物趋于球化并均匀地分布在钢中，形态和分布得以了改善，向钢中加入稀土进行复合变质，能促进贝氏体、奥氏体和位错亚结构的形成，细化马氏体板条。当残留稀土含量为0.02%时，CHD钢的硬度、强度变化不大，断裂韧性（KIC）和疲劳裂纹扩展门槛值（△Kth）有所提高，冲击韧性、延伸率、断面收缩率提高了近一倍，抗热疲劳性能也最好。     

铝合金表面电偶腐蚀与电子功函数的关系

铝合金中经常会引入一些第二相来改善其性能,第二相由于和铝基体的电位差不同,将会对铝合金的局部腐蚀产生重大的影响.为了揭示铝合金腐蚀的物理本质,本文利用基于密度泛函理论第一性原理的计算方法,详细计算了铝合金中一些主要第二相(Al_2Cu、Al_3Ti和Al_7Cu_2Fe)的多种晶面的电子功函数,分析了电子从各个晶面逸出的难易,求得了第二相与Al基体的本征电势差,我们发现不同的晶面暴露在合金最外层,会显著地影响本征电势差;即便是同一晶面,暴露在最外层的原子种类和构型不同,对腐蚀的影响也不一样.从电子的层面解释了电偶腐蚀发生的原因.     

Fracture toughness assessment of polypropylene random copolymer with multiple stress modes using the essential work of fracture theory

In recent years, the essential work of fracture (EWF) method has been extensively employed for assessing a material's toughness by specific essential fracture work, especially for polymers showing ductile failure. However, most research has studied either the in-plane stress mode or the out-of-plane stress mode. To obtain a more in-depth understanding of the EWF theory, the specific essential and non-essential fracture work of polypropylene random copolymer (PP-R) was investigated in both in-plane stress mode and out-of-plane stress mode. The effects of ligament length, amount of pre-cracking and pre-cracking method on the specific essential and non-essential fracture work were explored. The specific essential fracture work obtained in both stress modes is compared and discussed.     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

教学评一致性视域下金属单元复习课的实践*

分析金属知识在中考和教材中的地位,针对当前单元复习教学中存在的问题,依据教学评一致性原则,将“金属知识”的单元复习在“订书钉”为主要线索的探究活动中展开,以此激发学生的学习兴趣,优化学生单元知识结构,发展学生分析问题、解决问题的能力,同时提高学生对学科价值的认识。     

化学能转化成电能的实验设计

以常见的铜锌原电池反应为例,设计了一组对比实验装置,即化学反应装置与原电池装置。以化学反应装置中的能量变化为依据,展示了化学反应中释放出的能量具体形式为“热”与“功”;通过与原电池装置的比较,证明原电池实验装置中的“热”转化为了电能。     

Enrichment of HDL proteome and phospholipidome from human serum via IMAC/MOAC affinity

High-density lipoproteins (HDLs) have anti-inflammatory and antioxidant properties and are potentially cardio-protective. Defective HDL function is caused by alterations in both the proteome and lipidome of HDL particles. As potential biomarkers, the development of analytical methods is necessary for the enrichment of HDLs. Therefore, a method for selective enrichment of HDLs using immobilized metal ion affinity chromatography (IMAC) and metal oxide affinity chromatography (MOAC) is presented. SPE-based isolation of HDLs from whole serum is adopted as an alternative to traditional ultracentrifugation methods followed by SDS–PAGE. The enrichment mechanism relies on isoelectric points of lipoproteins and metal oxide. Negatively charged lipoprotein particles interact with positively charged metal oxides and IMAC affinity, which acts as a cation. Identified proteins from HDL through MALDI–MS analysis are apo AI, AII, AIV, CI, CIII, E, J, M, H, serum amyloid A and other nonapoproteins that are part of HDL particles and perform cellular functions. This serum-based proteomics approach gives insight into the functional role of HDL. HDL-associated phospholipids have also been analyzed by LDI–MS. Results suggest that the adopted analytical strategy is a feasible idea to extract lipoproteins from serum. A comparative study of healthy and diseased samples using this approach will provide valuable information in future.     

Enhanced electronic and nonlinear optical responses of C24N24 cavernous nitride fullerene by decoration with first row transition metals; A computational investigation

The electronic (energy gap and work function) as well as electrical properties (dipole moment, polarizability, and first hyperpolarizabilities) of the first-row transition metals decorated C₂₄N₂₄ cavernous nitride fullerene were explored using DFT calculations. The transition metals are decorated at N4 cavity of C₂₄N₂₄ fullerene. According to our spin polarized computations, the most stable spin state monotonically increases to sextet for Mn@C₂₄N₂₄ and thereafter dropped off gradually to singlet state for Zn@C₂₄N₂₄ system. The findings demonstrate that transition metals can remarkably decrease the HOMO-LUMO energy gap and work function values up to 63% and 21% of bare C₂₄N₂₄, respectively. As can be seen, when the Sc and Ti metals are located above the N4 cavity of fullerene, systems of enhanced static hyperpolarizabilities (β₀) are delivered. These findings might provide an effective strategy to design high performance eletcro-optical materials based on carbon- nitride fullerene.