The surface science of xerography

Over the past four decades xerography, the dry ink marking process developed by the photocopy industry, has grown from nothing into a $170 billion industry worldwide. This amazing commercial success is due to the fact that during this period, xerographic technology experienced constant and often-dramatic improvement created by sustained industrywide research and development. Indeed, the development of the xerographic copying and printing industry is one of the great applied surface science successes of all time. In this article we outline the story of the advances in xerographic technology during the past four decades, describe the profound dependence on these advances of the control of surface and interface properties of increasingly sophisticated multi-component materials systems, and indicate the potential impact on the industry of the continuing development of the surface and interface science of the multi-component materials packages used in xerographic technology.     

Analysis of nonconforming work as a tool for status analysis and continuous improvement

Absract  The methodology for statistical processing of reports on nonconforming work and unexpected situations which occur in the laboratory of Gamma-Ray Spectrometry Group at the Jožef Stefan Institute is presented. The results of statistical analyses are discussed. Pareto analysis has shown that the majority of cases of nonconforming work originates in errors made by personnel. The sociological and psychological aspects of strategies aimed at preventing careless work are discussed. It is proposed that motivation should be used as a tool against habits that lessen awareness during routine operations. Specific recommendations regarding communication with personnel are given. Received: 20 July 2001 Accepted: 24 October 2001     

金属/有机半导体界面偶极层的研究

利用金属/无机半导体界面模型对金属/有机半导体界面偶极层进行了数值研究.讨论了界面处金属/有机半导体原子间距与化学键密度对界面偶极能的影响;分析了界面层电场强度随化学键密度变化的原因;对界面偶极能与金属功函数之间的关系给出了合理的解释.     

Internal charge distribution of iodine adatoms on silicon and silicon oxide investigated with alkali ion scattering

Time-of-flight spectra were collected for low energy ⁷Li⁺ and ²³Na⁺ ions backscattered from Si(1 1 1) surfaces covered with sub-monolayers of iodine. Li ions singly scattered from the iodine adatoms have consistently larger neutralization probabilities than those scattered from the silicon substrate, and the neutralization decreases with off-normal emission. This indicates that the internal charge distribution of the iodine adatoms is not uniform, presumably due to attraction of electron density to the positively charged bonding Si atom. Photoelectron spectroscopy shows that iodine adsorbed on pre-oxidized Si bonds through the oxygen atom, forming hypoiodite (-OI) moieties. The neutralization of ²³Na⁺ backscattered from such iodine adatoms is independent of the emission angle, indicating that there is less charge rearrangement than for iodine bonded directly to Si.     

A DFT investigation of potential energy surface and vibrational properties of hydrogen adsorbed on the Rh(1 1 1) surface

Vibrational properties of hydrogen on the Rh(1 1 1) surface have been investigated theoretically. The potential energy surface for this system has been calculated within the density functional theory. The potential is found to be very anharmonic. The wave functions and their energies for the hydrogen motion on the potential energy surface (PES) have been calculated and assigned by using discrete variable representation. It was found that the vibrational wave function is localized at hollow site in the ground state for hydrogen on Rh(1 1 1). Higher excited states are of delocalized nature and mixed parallel and perpendicular character. Our results are in good agreement with the observed vibrational spectra of hydrogen on the Rh(1 1 1) surface.     

Ag,Au,K吸附在W(001)表面上的功函数随外加电场的变化

基于局域密度泛函理论和第一性原理赝势法,计算了Ag,Au,K在W(001)表面上吸附时的功函数随外加电场的变化关系.从计算结果可以看到,所有吸附系统的功函数变化与外加电场强度变化之间呈线性关系.通过比较系统功函数随外加电场强度变化的斜率的不同,可以推断Ag—W(001)的键合作用与Au—W(001)键合作用之间的细致差别,表明了Au—W(001)键合作用会略强于Ag—W(001)间的键 关键词： 功函数变化 外加电场 第一性原理计算     

Chemical and electronic properties of sulfur-passivated InAs surfaces

Treatment with ammonium sulfide ((NH₄)₂S_x) solutions is used to produce model passivated InAs(0 0 1) surfaces with well-defined chemical and electronic properties. The passivation effectively removes oxides and contaminants, with minimal surface etching, and creates a covalently bonded sulfur layer with good short-term stability in ambient air and a variety of aqueous solutions, as characterized by X-ray photoelectron spectroscopy, atomic force microscopy, and Hall measurements. The sulfur passivation also preserves the surface charge accumulation layer, increasing the associated downward band bending.     

Mechanisms of Enhanced Oil Recovery by Surfactant-Induced Wettability Alteration

Different measurements were conducted to study the mechanisms of enhanced oil recovery (EOR) by surfactant-induced wettability alteration. The adhesion work could be reduced by the surfactant-induced wettability alteration from oil-wet conditions to water-wet conditions. Surfactant-induced wettability alteration has a great effect on the relative permeabilities of oil and water. The relative permeability of the oil phase increases with the increase of the water-wetness of the solid surface. Seepage laws of oil and water are greatly affected by surfactant-induced wettability alteration. Water flows forward along the pore wall in the water-wet rocks and moves forward along the center of the pores in the oil-wet rocks during the surfactant flooding. For the intermediate-wet system, water uniformly moves forward and the contact angle between the oil–water interface and the pore surface is close to 90°. The direction of capillary force is consistent with the direction of water flooding for the water-wet surface. While for the oil-wet surface, the capillary force direction is opposite to the water-flooding direction. The highest oil recovery by water flooding is obtained at close to neutral wetting conditions and the minimal oil recovery occurs under oil-wet conditions.     

Porous Organic Polymer Films with Tunable Work Functions and Selective Hole and Electron Flows for Energy Conversions

Organic optoelectronics are promising technologies for energy conversion. However, the electrode interlayer, a key material between active layers and conducting electrodes that controls the transport of charge carriers in and out of devices, is still a chemical challenge. Herein, we report a class of porous organic polymers with tunable work function as hole‐ and electron‐selective electrode interlayers. The network with organoborane and carbazole units exhibits extremely low work‐function‐selective electron flow; while upon ionic ligation and electro‐oxidation, the network significantly increases the work function and turns into hole conduction. We demonstrate their outstanding functions as anode and cathode interlayers in energy‐converting solar cells and light‐emitting diodes.     

RESTUDY OF COUPLED FIELD THEORIES FOR MICROPOLAR CONTINUA (Ⅰ)──MICROPOLAR THERMOELASTICITY

ＩｎｔｒｏｄｕｃｔｉｏｎＳｏｍｅａｕｔｈｏｒｓｓｔｕｄｉｅｄｔｈｅｃｏｕｐｌｅｄｆｉｅｌｄｐｒｏｂｌｅｍｓｆｏｒｍｉｃｒｏｐｏｌａｒｃｏｎｔｉｎｕａ .Ｅｓｐｅｃｉａｌｌｙ ,Ｗ .Ｎｏｗａｃｋｉｐｕｂｌｉｓｈｅｄａｓｅｒｉｅｓｏｆａｂｏｕｔ 4 0ｓｃｉｅｎｔｉｆｉｃｐａｐｅｒｓｄｅａｌｉｎｇｗｉｔｈｔｈｅｍｉｃｒｏｐｏｌａｒｔｈｅｒｍｏｅｌａｓｔｉｃｉｔｙａｓｗｅｌｌａｓｔｈｅｐｒｏｂｌｅｍｓｏｆｄｉｓｔｏｒｔｉｏｎ ,ｔｈｅｒｍｏｄｉｆｆｕｓｉｏｎ ,ｔｈｅｒｍｏｐｉｅｚｏｅｌｅｃｔｒｉｃｉｔｙａｎｄｍ…