Comprehensive study on the formation of polyelectrolyte complexes from (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] and poly(2‐acrylamido‐2‐methylpropane sodium sulfonate)

Polyelectrolyte complexes (PECs) have been prepared from well‐defined (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) and high molecular weight poly(2‐acrylamido‐2‐methylpropane sodium sulfonate) (PAMPSNa) after a thorough study of their viscometric properties. The effect of pH and quaternization degree of PDMAEMA on PECs stoichiometry has been examined. PEC‐based materials have been characterized in terms of thermal stability, equilibrium swelling degree, and free/bound water composition. The stoichiometry and swellability of the physically crosslinked hydrogels obtained from fully quaternized PDMAEMA/PAMPSNa complexes do not depend on pH. In contrast, PECs made of non quaternized PDMAEMA and PAMPSNa are highly affected by pH, and could reversibly disintegrate at pH ≥ 9. Partially quaternized PDMAEMA/PAMPSNa PECs exhibit intermediate properties and form stable loose structures in the whole investigated pH range. Finally, stable dispersions of PECs nanoparticles have been successfully produced from dilute solutions of the complementary polyelectrolytes. The nanoparticle average diameter as determined by dynamic light scattering proved to depend on the molar fraction of DMAEMA‐based subunits and on the initial polyelectrolyte concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5468–5479, 2006     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

USING A SYSTEM DYNAMICS APPROACH TO MODEL SUSTAINABILITY INDICATORS FOR IRRIGATION SYSTEMS IN AUSTRALIA

ABSTRACT. An indicator defined as a function of the total water diversion through the Coleambally canal and the potential irrigation demand is selected to represent the sustainability of the irrigation water system in the Coleambally irrigation area, Australia. A simulation procedure using a system dynamics approach was developed to evaluate the indicator. The procedure includes water diversion assessment, potential crop water demand and total gross margin. Three cases of water supply options (surface water, ground water pumping and water trading), two cases of changes in the total agricultural area and three cropping pattern scenarios were simulated to better understand their impact on sustainability. The simulated results indicate that increasing the agricultural area reduces the sustainability of the irrigation system because the demand of water increased despite increase in the gross margin. The scenarios show that imposed water trading and ground water pumping would considerably increase the supply system having a positive impact on the sustainability. The paper concludes that a multi‐objective sustainability indicator taking account of economic and environmental issues could be more useful.     

CONFLICT AND COOPERATION IN UTILIZING A COMMON PROPERTY RESOURCE

Noncooperative games are used to demonstrate that, while free riding is always an option, the “tragedy of the commons” is not inevitable. When the decision to cooperate or free ride is considered in a dynamic setting, there is no intermediate case where some cooperate and others free ride. The game is only stabilized in either full cooperation or full defection. The important factor in obtaining a cooperative outcome is the critical number of players that decide to cooperate. The concept of commitment is used to demonstrate the necessary and sufficient conditions for full cooperation. Although the analysis is based on a shared water resource, it can be extended to other natural resources with common costs and private benefits, especially in the cases where there are no international authorities or treaties that internalize the externalities involved in privatizing the resource.     

合成丙交酯中微量水分分析

合成丙交酯中微量水分分析徐溢，柳胜春（重庆大学化工学院分析教研室６３００４４）关键词丙交酯，微量水，定量分析丙交酯是人工合成骨材料聚乳酸的合成中间体，其性能决定着合成产品的品质，要获得高质量的合成材料，对中间体的分析和监测十分重要。一般要求丙交酯中间...     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

Heats of solution of gaseous hydrocarbons in water at 25°C

The heats of solution at 25°C for a number of hydrocarbon gases are reported as measured by a calorimetric method. There is excellent agreement between the standard enthalpy changes of solution measured calorimetrically and those derived from high precision temperature dependent solubility measurements. However the calorimetrically determined standard enthalpies of solution of a number of gases are greatly improved over values obtained from low precision temperature dependent solubility measurements. A method is presented to readily estimate the standard errors in the standard enthalpy change for any process derived from the temperature dependence of the equilibrium constant for the process. Comparison of the standard enthalpies and entropies of solution of hydrocarbon gases in water shows that the standard free energies of solution for all hydrocarbon gases investigated are dominated by unfavorable entropy contributions. A strong linear correlation between the standard entropy of solution and the number of hydrogens in the hydrocarbon molecule is found. This correlation suggests that the hydrocarbon hydrophobic effect is regulated by the number of allowable configurations of a water molecule in contact with each C–H group.     

Amide-water interactions in cosolvent systems. I. Solubilities and apparent molar volumes of methyl paraben

Solubility and apparent molar volume data are used to demonstrate effects of amide alkylation on amide-water interactions at 25° C. Precise measurements were made of the apparent molar volumes of the amides in binary amide-water mixtures using a dilatometric technique. The results show that the apparent molar volumes of alkyl-substituted amides in water pass through a minimum at an amide concentration which varies inversely with the degree of alkylation. Further studies showed that the solubilities of methyl paraben (methyl-p-hydroxybenzoate) and naphthalene in various amide-water solvent systems increased in characteristic fashion with amide alkylation.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

Comparison of path-complete Lyapunov functions via template-dependent lifts

This paper investigates, in the context of discrete-time switched systems, the problem of comparison for path-complete stability certificates. We introduce and study abstract operations on path-complete graphs, called lifts, which allow us to recover previous results in a general framework. Moreover, this approach highlights the existing relations between the analytical properties of the chosen set of candidate Lyapunov functions (the template) and the admissibility of certain lifts. This provides a new methodology for the characterization of the ordering relation of path-complete Lyapunov functions criteria, when a particular template is chosen. We apply our results to specific templates, notably the sets of primal and dual copositive norms, providing new stability certificates for positive switched systems. These tools are finally illustrated with the aim of numerical examples.