Minimal dissipation rate approach to correlate phase inversion data

Phase inversion refers to the phenomenon whereby a small change in operational flow conditions causes an oil-in-water dispersed flow pattern to suddenly switch to a water-in-oil flow pattern, and viceversa. This paper proposes an interpretation of phase inversion in terms of minimal dissipation rate. To this end, the dissipation rate is computed by a simple homogeneous model together with available correlations for effective viscosity in dispersed flows. It is shown that the data available in the literature can be reasonably interpreted as a manifestation of minimal dissipation rate. Furthermore, if the assumed effective viscosity correlations take into account pipe wettability, the minimal dissipation rate approach is capable to interpret also the so-called ambivalent range (hysteresis effect) and correlate the available data.     

T2 relaxation measurement with solvent suppression and implications to solvent suppression in general

A number of suppression pulse sequences including Excitation Sculpting and WATERGATE were incorporated into the standard Carr‐Purcell‐Meiboom‐Gill (CPMG) program for T₂ measurement and experimentally evaluated. The chosen suppression schemes were of varying complexity encompassing pulse program elements, such as presaturation, gradients, and selective pulses, which are typically utilized for solvent suppression. The quality of the spectral data and the accuracy of T₂ measurements of the investigated suppression schemes were evaluated using three aqueous samples with increasing proton content in the water solvent, i.e. by volume 100% D₂O, 80/20% D₂O/H₂O, and 20/80% D₂O/H₂O. For signals removed from the water signal, the T₂ values were generally very consistent between all pulse sequences tested. T₂ measurements can be unreliable for signals too close to the water signal such that they are significantly suppressed as well. Their intensity may actually grow initially through cross relaxation that transfers magnetization back to the solute signal. In turn, this relaxation phenomenon can be exploited to improve the spectral quality of conventional solvent suppression schemes. In favorable cases, even signals that are completely masked by the water signal can be recovered by adding a carefully chosen number of spin echoes with optimized evolution time to conventional water suppression pulse programs, such as Excitation Sculpting or WATERGATE. Copyright © 2009 John Wiley & Sons, Ltd.     

基于分布参数模型的CO_2蒸发器结构参数研究

在设计工况下,建立了用于跨临界二氧化碳热泵热水器的套管式蒸发器的稳态分布参数模型,对其结构参数进行了敏感性分析,指出了它们的合理变化范围:管内套1根管时,内管外径应至少大于11.00mm,低于13.00mm,外管内径应在20.00mm以上,23.00mm以下;管内套多根管时,以管内套3根管的性能为最优。优化设计结果对开发二氧化碳蒸发器产品具有一定的指导意义。     

TVD scheme for computing open channel wave flows

For the shallow water equations in the first approximation (Saint-Venant equations), a TVD scheme is developed for shock-capturing computations of open channel flows with discontinuous waves. The scheme is based on a special nondivergence approximation of the total momentum equation that does not involve integrals related to the cross-section pressure force and the channel wall reaction. In standard divergence difference schemes, most of the CPU time is spent on the computation of these integrals. Test computations demonstrate that the discontinuity relations reproduced by the scheme are accurate enough for actual discontinuous wave propagation to be numerically simulated. All the qualitatively distinct solutions for a dam collapsing in a trapezoidal channel with a contraction in the tailwater area are constructed as an example.     

Micelles possessing mixed cores and thermoresponsive shells fabricated from well‐defined amphiphilic ABC miktoarm star terpolymers

Amphiphilic ABC miktoarm star terpolymers consisting of polystyrene, poly(ε‐caprolactone), and poly(N‐isopropylacrylamide) arms, PS(‐b‐PNIPAM)‐b‐PCL, were synthesized via a combination of atom transfer radical polymerization, ring‐opening polymerization (ROP), and click chemistry. Difunctional PS bearing an alkynyl and a primary hydroxyl moiety at the chain end, PS‐alknyl‐OH, was prepared by reacting azido‐terminated PS with an excess of 3,5‐bis(propargyloxy)benzyl alcohol (BPBA) under click conditions. The subsequent ROP of ε‐caprolactone using PS‐alknyl‐OH macroinitiator afforded PS(‐alkynyl)‐b‐PCL copolymer bearing an alkynyl moiety at the diblock junction point. Target PS(‐b‐PNIPAM)‐b‐PCL amphiphilic ABC miktoarm star terpolymers were then prepared via click reaction between PS(‐alkynyl)‐b‐PCL and an excess of azido‐terminated PNIPAM (PNIPAM‐N₃). The removal of excess PNIPAM‐N₃ was accomplished by “clicking” onto alkynyl‐functionalized Wang resin. All the intermediate and final products were characterized by gel permeation chromatography, ¹H NMR, and FTIR. In aqueous solution, the obtained amphiphilic ABC miktoarm star terpolymer self‐assembles into micelles possessing mixed PS/PCL cores and thermoresponsive shells, which were further characterized by dynamic laser light scattering and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1636–1650, 2009     

Kinetic study on the living/controlled cationic polymerization of p‐methoxystyrene coinitiated by tris(pentafluorophenyl)borane

A kinetic study of the living cationic polymerization of p‐methoxystyrene using 1‐(4‐methoxyphenyl)ethanol ( 1 )/B(C₆F₅)₃ initiating system in a mixture of CH₃CN with CH₂Cl₂ 1:1 (v/v) at room temperature was carried out utilizing a wide variety of conditions. The polymerization proceeded in a living fashion even in the presence of a large amount of water ([H₂O]/[B(C₆F₅)₃] ratio up to 20) to afford polymers whose M_n increased in direct proportion to monomer conversion with fairly narrow MWDs (M_w/M_n ≤ 1.3). The investigation revealed that the rate of polymerization was first‐order in B(C₆F₅)₃ concentration, while a negative order in H₂O concentration close to ?2 was obtained. It was also found that the rate of polymerization decreased with lowering temperature, which could be attributed to a decreased concentration in free Lewis acid, the true coinitiator of polymerization. A mechanistic scheme to explain the kinetic behavior of living p‐methoxystyrene polymerization is proposed, which has been validated by PREDICI simulation on multiple‐data curves obtained by ¹H NMR in situ polymerization experiment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6928–6939, 2008     

Discontinuous boundary implementation for the shallow water equations

Quasi‐bubble finite element approximations to the shallow water equations are investigated focusing on implementations of the surface elevation boundary condition. We first demonstrate by numerical results that the conventional implementation of the boundary condition degrades the accuracy of the velocity solution. It is also shown that the degraded velocity leads to a critical instability if the advection term is present in the momentum equation. Then we propose an alternative implementation for the boundary condition. We refer to this alternative implementation as a discontinuous boundary (DB) implementation because it introduces at each boundary node two independent mass–flux values that result in a discontinuity at the boundary. Numerical results show that the proposed DB implementation is consistent, stabilizes the quasi‐bubble scheme, and leads to second‐order accuracy at the surface elevation specified boundary. Copyright © 2004 John Wiley & Sons, Ltd.     

Surface pressure‐area curves compression isotherm of sericin Langmuir monolayer

The Langmuir monolayer of sericin protein was studied by means of surface pressure (π)—molecular area (A) isotherms at different pH subphase. The monolayer of sericin exhibits typical phase transition phenomena at pH 2, pH 4.8, pH 7 and pH 11, respectively, including from gas state to gas‐liquid state and finally to condensed solid state. However, the monolayer of sericin on pH 11 subphase appears to be solid state. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental study of bubble dynamics in the neighbourhood of a vertical incomplete boundary

The bubbles have been widely used in biomedical field, military and chemical industry. The liquid jet generated by the bubble collapse through an orifice is utilized in needle-free injections and inkjet printing. In this paper we devised synchronized triggering equipment, experimentally investigated the mechanism in the interaction of an electric-spark generated a single bubble and a vertical wall with an air-back opening. Detailed observations were recorded and described for bubble oscillation, migration, jetting, as well as the high-speed water spike penetrating through the opening. The results revealed that there was a critical value of the bubble-wall distance, below which the bubble was directed away from the incomplete boundary, while the bubble may tear from the middle for larger distance. As the distance varied, we studied the volume of the water that rushed through the opening, the velocity at the tip of the water spike, and the center of the bubble as well as the migration of the bubble boundary. This work reveals that the high-speed water spike caused by the bubble may be a potential threat to the structures, specifically for cases with a small opening size and short bubble-boundary distance.