Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

The relative permittivity of 1,2-ethanediol+2-methoxyethanol+water ternary mixtures

The relative permittivities for the ternary 1,2-ethanediol (component 1) + 2-methoxyethanol (2) + water (3) solvent system have been measured for 66 mixtures covering the whole mole fraction composition 0X₁/X₂/X₃ 1 range at –10, –5 and 0 °C. The experimental data were used to test some empirical relations stating the dependence of = (X₁, X₂, X₃). A comparison between the calculated and experimental data show that these equations can be usefully employed to predict values in correspondence of the experimental data gaps.     

Fluorous reverse-phase silica gel-supported Lewis acids as recyclable catalysts in water

Fluorous reverse-phase silica gel (FRPSG)-supported Lewis acids which have fluorous ligands acted as effective catalysts of Baeyer-Villiger and Diels-Alder reactions in water. Direct esterification of carboxylic acid with alcohol in organic media was also catalyzed. The FRPSG-supported Lewis acids could be recycled by simple filtration after the reaction.     

Large-volume PTV injection: Comparison of direct water injection and in-vial extraction for GC analysis of triazines

Summary The potential of large-volume PTV injection was studied for the analysis of triazine herbicides in water samples. Direct water injection and in-vial extraction were described and compared. Detection limits were between 0.01–0.02 μg L⁻¹ and relative standard deviations were <9%. Both methods are suitable for the analysis of triazines at ppt-level, although in-vial extraction is favourable for water samples with relatively large amounts of matrix components.     

The acidity functionsH 0 s of HCl solutions in EtOH with low water content

The acidity functionsH ₀ ^s of HCl solutions in EtOH-H₂O solvents containing 1.09, 3.0, and 5.0% water have been measured at 25 and 40 °C by the indicator method. The concentration of HCl changes from 10^–2 to 36m. Nitroanilines, for which a protonation mechanism is realized in the studied systems, were used as indicators.For each solvent,H ₀ ^s is temperature independent atm _HCl < 4, and acidity atm _HCl > 4 mol L^–1 increases more rapidly at 25 °C than at 40 °C. The acidity functions of aqueous and water-ethanol solutions of HCl were compared, and the concentrations of proton solvates of different compositions and their relative protonating ability were evaluated.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1722–1725, October, 1994.This work was financially supported by the Russian Foundation for Basic Research (Project No. 93-03-18356).     

Hydrate inclusion compounds

There are three general classes of hydrate inclusion compounds: the gas hydrates, the per-alkyl onium salt hydrates, and the alkylamine hydrates. The first are clathrates, the second are ionic inclusion compounds, the third are semi-clathrates. Crystallization occurs because the H₂O molecules, like SiO₂, can form three-dimensional four-connected nets. With water alone, these are the ices. In the inclusion hydrates, nets with larger voids are stabilized by including other guest molecules. Anions and hydrogen-bonding functional groups can replace water molecules in these nets, in which case the guest species are cations or hydrophobic moieties of organic molecules. The guest must satisfy two criteria. One is dimensional, to ensure a comfortable fit within the voids. The other is functional. The guest molecules cannot have either a single strong hydrogen-bonding group, such as an amide or a carboxylate, or a number of moderately strong hydrogen-bonding groups, as in a polyol or a carbohydrate.The common topological feature of these nets is the pentagonal dodecahedra: i.e., 5¹²-hedron. These are combined with 5¹²6²-hedra, 5¹²6³-hedra, 5¹²6⁴-hedra and combinations of these polyhedra, to from five known nets. Two of these are the well-known 12 and 17 Å cubic gas hydrate structures,Pm3n, Fd3m; one is tetragonal,P4 ₂/mnm, and two are hexagonal,P6 ₃/mmc andP6/mmm. The clathrate hydrates provide examples of the two cubic and the tetragonal structures. The alkyl onium salt hydrates have distorted versions of thePm3n cubic, the tetragonal, and one of the hexagonal structures. The alkylamine hydrate structures hitherto determined provide examples of distorted versions of the two hexagonal structures.There are also three hydrate inclusion structures, represented by single examples, which do not involve the 5¹²-hedra. These are 4(CH₃)₃CHNH₂·39H₂O which is a clathrate; HPF₆·6H₂O and (CH₃)₄NOH·5H₂O which are ionic-water inclusion hydrates. In the monoclinic 6(CH₃CH₂CH₂NH₂)·105H₂O and the orthorhombic 3(CH₂CH₂)₂NH·26H₂O, the water structure is more complex. The idealization of these nets in terms of the close-packing of semi-regular polyhedra becomes difficult and artificial. There is an approach towards the complexity of the water salt structures found in the crystals of proteins.