混合价四核锰配合物[Mn4O2(ClCH2COO)7(bipy)2]•H2O的合成、晶体结构及性质研究

在乙腈溶液中, 由混合价三核锰配合物[Mn₃O(ClCH₂COO)₆(py)₂]•(H₂O) (py为吡啶)与2,2′-联吡啶(bipy)反应合成了混合价(Mn₃^IIIMn^II)四核锰配合物[Mn₄O₂(ClCH₂COO)₇(bipy)₂]•H₂O. 采用元素分析、红外光谱、热分析和X射线单晶衍射法确定了其组成和结构. 标题化合物晶体属于三斜晶系, 空间群P-1, 晶胞参数: a＝0.89854(13) nm, b＝1.4027(2) nm, c＝1.9037(3) nm, α＝93.518(3)°, β＝96.736(3)°, γ＝94.875(3)°, V＝2.3680(6) nm³, Z＝2, D_c＝1.734 g/cm³, F(000)＝1238, GOF＝1.036, R₁＝0.0592, wR₂＝0.1162 [I＞2σ(I)]. 在标题化合物中, 配位结构单元中心为一蝶型[Mn₄(μ₃-O)₂]^7＋多核簇, 含有2个Mn₃(μ₃-O)单元, 具有近似C₂对称轴. 4个Mn离子均为六配位, 外围配体为7个氯乙酸根和2个2,2′-联吡啶, 处于变形的八面体环境. 变温磁化率研究表明标题化合物在整体上表现为反铁磁性耦合作用, 但在低温下的磁相互作用较为复杂.     

Preparation and application of Ce-doped mesoporous TiO2oxide

Summary Mesoporous TiO₂-CeO₂mixed oxides (m-TiO₂-CeO₂) were synthesized under easy-operating neutral conditions. The structure was characterized by means of FT-IR, XRD, and N₂adsorption methods. For methanol decomposition to CO and H₂, the catalytic activity of the Ru/ m-TiO₂-CeO₂ catalyst was higher than that of the Ru/ m-TiO₂.</o:p>     

Decomposition of halogenated hydrocarbons using intense, penetrating bremsstrahlung

Radiolytic decomposition of chlorinated hydrocarbons and other toxic compounds has been experimentally measured using ionizing radiation produced by electron accelerator and nuclear isotope sources. Decomposition products have been identified. A portable, commercially available electron accelerator was set up at a Superfund site where vapor extraction wells were removing trichloroethylene (TCE) from a spill into the unsaturated soil. The extraction vapor was passed through the accelerator beam to decompose the TCE. On site radiolytic decomposition of TCE vapor using an accelerator is shown to be significantly less expensive than filtration of TCE vapor using activated charcoal.     

Synthesis and thermal decomposition of cobalt-containing oligosilanes

Oligo(phenylcobaltcarbonylsilane) was prepared from oligo(phenylsilane) and dicobalt octacarbonyl. The reaction proceeds with elimination of H₂ and CO and insertion of cobalt carbonyl fragments into the silicone backbone of oligosilane. Oligosilane containing cobalt carbonyl groups in side organic substituents was obtained from oligolmethyl(phenylethynyl)Isilane and CO₂(CO)₈. The reaction of 1,2-bis(phenylethyny1)tetramethyldisilane with Co₂(CO)₈ proceeds with the sequential attachment of cobalt carbonyl fragments to ethynyl groups to form disilane derivatives [²-CCPhCo₂(CO)₆] Thermal decomposition of cobalt-containing oligosilanes affords a mixture of paramagnets and ferromagnets.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 10, pp. 2561–2567, October, 1996.     

Energy decomposition in molecular complexes: implications for the treatment of polarization in molecular simulations

This study examines the contribution of electrostatic and polarization to the interaction energy in a variety of molecular complexes. The results obtained from the Kitaura-Morokuma (KM) energy decomposition analysis at the HF/6-31G(d) level indicate that, for intermolecular distances around the equilibrium geometries, the polarization energy can be determined as the addition of the polarization energies of interacting blocks, as the mixed polarization term is typically negligible. Comparison of KM and QM/MM results shows that the electrostatic energy determined in the KM method is underestimated (in absolute value) by QM/MM methods. The reason of such underestimation can be attributed to the simplified representation of treating the interaction between overlapping charge distribution by the interaction of a QM molecule with a set of point charges. Nevertheless, the polarization energies calculated by KM and QM/MM methods are in close agreement. Finally, a consistent, automated strategy to derive charge distributions that include implicitly polarization effects in pairwise, additive force fields is presented. The strategy relies in the simultaneous fitting of electrostatic and polarization energies computed by placing a suitable perturbing particle at selected points around the molecule. The suitability of these charges to describe molecular interactions is discussed.     

CaClH2PO4·H2O的合成及其性质的研究

本文介绍了CaClH_2PO_4·H_2O的合成和纯化的方法。用精密量热计系统测定了CaClH_2PO_4·H_2O的标准生成焓在298.15K时为-2282.34kJ mol~(-1)。评述和讨论了热分解反应的化学动力学性质,测定了分解反应的级数和表现活化能。     

An investigation of dynamic mechanical, thermal, and electrical properties of housing materials for outdoor polymeric insulators

The present paper reports the results about a study of mechanical, thermal, dynamic mechanical and electrical properties of housing (weather shed) materials for outdoor polymeric insulators. Silicone rubber, ethylene-propylene-diene monomer (EPDM) and alloys of silicon-EPDM are known polymers for use as housing in high voltage insulators. The result of dynamical mechanical measurement shows that the storage modulus of blends enhances with increase EPDM in formulation. It can be seen from the result of TGA measurement that initial thermal degradation of silicone rubber improves by the effect of EPDM in blends. The blends of silicone-EPDM show good breakdown voltage strength compared to silicone rubber. Surface and volume resistance of silicone rubber improve by EPDM content. The mechanical properties of EPDM such as strength, modulus and elongation at break improve by silicone.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Limit of detection estimator for second-order bilinear calibration

A new approach is developed for estimating the limit of detection in second-order bilinear calibration with the generalized rank annihilation method (GRAM). The proposed estimator is based on recently derived expressions for prediction variance and bias. It follows the latest IUPAC recommendations in the sense that it concisely accounts for the probabilities of committing both types I and II errors, i.e. false positive and false negative declarations, respectively. The estimator has been extensively validated with simulated data, yielding promising results.     

Sample decomposition in an electrically heated cold-trap inlet system for high speed gas chromatography

Thermal decomposition of some hydrocarbon and chlorinated hydrocarbon compounds in metal capillary tubes used in an inlet system for high speed gas chromatography has been investigated. The metal tube is cooled to about ?75°C by a flow of cold nitrogen gas in order to focus a vapor sample cryogenically. A capacitive discharge power supply is then used to heat the metal tube resistively in order to revaporize the sample and introduce it to the separation column as a plug 5-10 ms wide. The effects of tube temperature, tube material, sample vapor residence time, and type of carrier gas on thermal cracking are described. Use of a copper-nickel alloy tube resulted in less cracking than either pure platinum or pure nickel. Cracking is more significant with hydrogen as carrier gas than with helium. Cracking also increases with increasing sample residence time in the hot tube. Quantitative sample injection with minimum decomposition can be obtained for a variety of aliphatic and aromatic hydrocarbons and chlorinated hydrocarbon compounds.