Structural study of the ferroelectric instability in SnPSe

The structural change occurring in between the paraelectric and the ferroelectric phases is investigated by means of X-ray diffraction. Details of the structure in both phases are obtained and the role of the lone pair is discussed in the light of structural data. In agreement with the 2/ m to m symmetry lowering, polar displacements are found within the m plane away from a particular crystallographic direction but antiparallel displacements occur also. These results are discussed in the frame of the phenomenological theory which predicts a particular temperature dependence of the dielectric polarization in this crystal. Received: 10 July 1998     

热注射法合成Cu2 SnSe3纳米晶及其光电转换性能

以乙酰丙酮铜、无水氯化亚锡为金属源,Se/OLA悬浊液为硒源,在油胺溶剂中热注射合成了Cu2 SnSe3纳米晶.采用TEM、XRD、EDS分别对典型纳米晶产物的形貌、物相和组成做了分析表征.通过不同反应温度的条件实验,研究了反应温度对最终产物的影响,探讨了相关规律.采用光电化学池评价了纳米晶的光电转换性能,结果表明Cu2 SnSe3纳米晶光电转换性能优良,表现出较好的应用前景.     

基于准等重二甲基化标记的高通量蛋白质组选择性交叉标记装置

面对生物学及精准医学等领域多变量、大样本量的蛋白质组定量分析的需求,高通量的定量标记及分析已经成为近年来蛋白质组学方法发展的趋势。发展了一种基于准等重二甲基化标记策略的高通量肽段末端选择性交叉标记装置（pIDL-StageTip）,借助简单的装置及离心力,有效地增加了定量标记的通量,并保证了肽段末端两步标记反应时间的可控性及操作的简便性。通过优化酸性条件下NaBD₃CN与NaBH₃CN体系的标记条件,得到了标准蛋白质酶解产物100%的标记效率、95%以上的标记选择性;在人源蛋白质组复杂体系下,标记效率大于99%,标记选择性为100%。基于该装置的定量方法具有很高的定量准确度及精密度。该装置为实现高可操作性、高准确度、高通量的蛋白质组定量标记提供了一个可靠的解决方案。     

Cross-sections for the formation of isomeric pair Ge through (n, 2n), (n, p) and (n, α) reactions measured over 13.73 MeV to 14.77 MeV and calculated from near threshold to 20 MeV neutron energies

The cross-sections for formation of isomeric pair, ⁷⁵Ge^m(σ_m) and ⁷⁵Ge^g(σ_g), through ⁷⁶Ge(n, 2n), ⁷⁵As(n, p) and ⁷⁸Se(n, α) reactions were measured at 13.73 MeV, 14.42 MeV and 14.77 MeV neutrons and also estimated using EMPIRE-II and TALYS codes over neutron energies from near threshold to 20 MeV. For each (n, 2n), (n, p) and (n, α) reaction, the cross-section initially increases with neutron energy, but starts decreasing as the neutron energy exceeds the respective threshold of (n, 3n), (n, pn) and (n, αn) reactions. The higher values of σ_m relative to σ_g reveal that the transitions of the excited ⁷⁵Ge from higher energy levels to metastable state (7⁺/2) are favored as compared to unstable ground state (1⁻/2). The present values of cross sections for formation of ⁷⁵Ge^m,g through (n, 2n) and (n, α) reactions are lower, and that of (n, p) reaction are higher compared to most of the corresponding literature cross-sections.     

水热法合成硒化锡纳米盘及其形成机理探讨

本制备方法以二氧化硒(SeO2)为硒源,以氯化亚锡(SnCl2·2H2O)为锡源,以水合肼(N2H4·H2O)为还原剂在180 ℃ 的条件下利用水热法合成了硒化锡纳米盘.产物分别用扫描电子显微镜(SEM)、X射线衍射仪(XRD)表征手段进行了表征,探索了硒化锡纳米盘的形成机理.通过一系列反应物中不同硒元素与锡元素的摩尔比的条件实验,讨论了其对反应所得产物的影响;另外,通过不同反应温度的条件实验,研究了反应体系温度对所得反应产物的影响,讨论了相关的规律.     

从精品到精彩:化学微课的现状、创作与使用

国内现有化学微课的整体水平可以从3个角度进行分析: 拍摄方式、拍摄内容和拍摄技术。分析精品化学微课, 主要有4个典型特征。关于微课使用, 提出了精品微课在“翻转课堂”中需要“自主任务学习单”支撑的观点。对于未来的微课创作与使用, 需要破除6大疑惑, 解决创作中的8大问题。     

A novel technique for scaffold fabrication: SLUP (salt leaching using powder)

In this study, we proposed a novel salt-leaching method using PCL and NaCl powders, known as the SLUP (salt leaching using powder) technique, which has several advantages: this technique does not require solvent, pressure, or unnecessary expensive devices. First, PCL powder (100–180 μm size) and NaCl powder (350–400 μm size) were prepared. Second, the PCL and NaCl powders were mixed at a certain ratio, and then the mixed powder was poured into a mold. Afterward, the mold was heated to melt the PCL powder in an oven at 80 °C for 15 min. Subsequently, after the PCL/NaCl mixture was separated from the mold, the PCL/NaCl mixture was soaked in D.I. water for 24 h to leach out the NaCl particles. Consequently, the remaining PCL structure was porous and could be used as a scaffold. To analyze the compressive modulus of the fabricated scaffold, a uniaxial compression test was performed using a UTM (universal testing machine), and the surface characteristics of the scaffold were observed using an SEM (scanning electron microscope). Additionally, cell-culture experiments were performed using hMSCs (human mesenchymal stem cells), and the cell-culture characteristics were assessed and compared with the characteristics from a conventional salt-leaching scaffold.     

钢板-混凝土组合加固钢筋混凝土梁的非线性有限元分析

以10根采用钢板-混凝土组合加固技术加固的钢筋混凝土梁的试验为基础,建立了钢板-混凝土组合加固钢筋混凝土梁的非线性有限元模型.沿用了钢板-混凝土组合梁有限元分析中栓钉的荷载-滑移曲线及断裂模型,提出了新老混凝土界面的剪切-滑移模型,可以较好地模拟界面受力性能.采用有限元软件ABAQUS,模拟了一次加固、不同损伤加固及持载加固等加载情况下加固构件受力全过程和受弯破坏以及新老混凝土剥离破坏等破坏形态下加固试件的受力性能.在验证了有限元模型的准确性后,分析了钢板厚度、加固部分高度及长度等参数对加固构件承载能力及刚度的影响.最后提出了几点对钢板-混凝土组合加固RC梁的设计建议.     

与医用CT配套的便携式材料试验机的研制及其在混凝土损伤研究中的应用

混凝土内部细观裂纹的演化规律研究可以解释其动态特性和损伤破坏机理.X射线CT技术是无损探测混凝土内部细观裂纹萌生、扩展、贯通的有效手段.与医用CT配套的便携式材料试验机是进行混凝土CT试验的关键加载设备.本文概要介绍研制便携式材料试验机的研制过程.论述实现动态加载的几个关键技术问题,包括加载设备的便携式要求、加载波形显示、加载控制、试件安装和粘结技术等.经过试验,表明所研制的加载设备达到了使用要求.混凝土动力压缩条件下突发性裂纹的出现是其动态强度提高的原因之一.