A field-reversal method for measuring the parameters of a ferroelectric liquid crystal

A method for measuring the spontaneous polarization P _s, the switching time, the rotational viscosity γ_φ, and the d.c. conductivity σ is presented. The possibilities of estimating the azimuthal angle φ₀, the dielectric anisotropy δε and the dielectric permittivity ε_⊥ in the same experiment are also discussed. It is explicitly shown that the switching delay, though primarily dependent on the material and the applied field, is also dependent on the geometry of the cell.     

Synthesis and Characterization of Poly(ether ether ketone)s with (2,5‐dihydroxy)phenyl Side Group

A new monomer, (2,5‐dimethoxy)phenylhydroquinone (DMPH), was prepared in a two‐step synthetic procedure. One aromatic poly(ether ether ketone)s with 2,5‐dimethoxy phenyl side group (DMP‐PEEK) was synthesized via an aromatic nucleophilic substitution reaction with 4,4′‐difluorobenzophenone (DFB). Poly(ether ether ketone)s with 2,5‐dihydroxy phenyl side group (DHP‐PEEK) was obtained via hydrolysis of methoxy group on the DMP‐PEEK. Both of the high molecular weight polymers could be obtained despite the steric effect of the bulky pendant groups. The two polymers have good solubility at room temperature.     

Thermal properties and structure of electrospun blends of PVDF with a fluorinated copolymer

We report the structure and thermal properties of blends comprising poly(vinylidene fluoride) (PVDF) and a random fluorinated copolymer (FCP) of poly(methyl methacrylate)‐random‐1H,1H,2H,2H‐perfluorodecyl methacrylate, promising membrane materials for oil–water separation. The roles of processing method and copolymer content on structure and properties were studied for fibrous membranes and films with varying compositions. Bead‐free, nonwoven fibrous membranes were obtained by electrospinning. Fiber diameters ranged from 0.4 to 1.9 μm, and thinner fibers were obtained for PVDF content >80%. As copolymer content increased, degree of crystallinity and onset of degradation for each blend decreased. Processing conditions have a greater impact on the crystallographic phase of PVDF than copolymer content. Fibers have polar beta phase; solution‐cast films contain gamma and beta phase; and melt crystallized films form alpha phase. Kwei's model was used to model the glass transition temperatures of the blends. Addition of FCP increases hydrophobicity of the electrospun membranes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 312–322     

The Polymer Physics of Multiscale Charge Transport in Conjugated Systems

Conjugated polymers are promising candidates for next‐generation low‐cost flexible electronics. Field‐effect transistors comprising conjugated polymers have witnessed significant improvements in device performance, notably the field‐effect mobility, in the last three decades. However, to truly make these materials commercially competitive, a better understanding of charge‐transport mechanisms in these structurally heterogeneous systems is needed for providing systematic guides for further improvements. This review assesses the key microstructural features of conjugated polymers across multiple length scales that can influence charge transport, with special attention given to the underlying polymer physics. The mechanistic understanding from collective experimental and theoretical studies point to the importance of interconnected ordered domains given the macromolecular nature of the polymeric semiconductors. Based on the criterion, optimization to improve charge transport can be broadly characterized by efforts to (a) promote intrachain transport, (b) establish intercrystallite connectivity, and (c) enhance interchain coupling. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1559–1571     

High-Throughput Synthesis and Characterization of Aryl Silicones by Using the Piers–Rubinsztajn Reaction

Arylsilicones are widely exploited for their thermal and optical properties. The creation of phenylsilicone elastomers with specific physical properties is typically done by a “one-off” formulation and test process. Herein, it is demonstrated that high-throughput synthesis methods can be used to rapidly prepare a series of arylsilicone elastomers and then the relative impact of different aryl groups on their physical properties is assessed. Aromatic groups were incorporated into polydimethylsiloxane (PDMS) elastomers by exploiting the relative reactivity of different functional groups in the Piers–Rubinsztajn reaction. To analyze trends in the silicone mechanical properties as a function of increasing aryl concentration—structure/property relationships—libraries of elastomers were both quickly synthesized and characterized by using high-throughput suites starting from low viscosity silicone oils/monomers in 96-well plates. Liquid handling parameters were optimized to effectively work with the silicones. Incorporating aryl instead of alkyl crosslinkers into the PDMS backbone increased the silicone elastomer modulus by approximately 50 % (at a crosslink density of 6 %); elastomers prepared with an aromatic crosslinker with three contact points led to much higher moduli compared with those with one contact point at the same crosslink density. When located at precise rather than random points on the silicone chains, diphenylsilicones had lower moduli than analogous monophenylsilicones.     

Estimation of viscosities of 1-alkyl-3-methylimidazolium ionic liquids over a range of temperatures using a simple correlation

In this study, a new correlation is proposed for estimating 1-alkyl-3-methylimidazolium ionic liquid (IL) viscosities at different temperatures and atmospheric pressure. Since ILs are rather novel, many of their physical properties are still unavailable. Because of this limitation, the aim of this work was to propose a correlation with a new insight and approach, which requires a minimum number of physical properties as input parameters. In addition to minimal dependency on physical properties, further goals in the development of the model were generality, ease-of-use, simplicity and high accuracy. A total of 2073 literature viscosity datapoints at different temperatures for 38 different ILs were used and a correlation was developed which satisfied the above-mentioned goals. The IL viscosity models of Lazzús and Pulgar-Villarroel, and Gardas and Coutinho were compared to the proposed correlation. More reliable results were obtained by the proposed relation in comparison to literature models.     

Impact of post-injection strategy on the physicochemical properties and reactivity of diesel in-cylinder soot

Post injection has significant benefit in the reduction of diesel soot emissions. Therefore, there is a need to understand the effect of post-injection strategy on soot physicochemical properties and reactivity because they play an important role in soot oxidation process that governs the final soot emissions. This work focuses on the impact of post injection on the physicochemical properties and reactivity of diesel in-cylinder soot using a main plus post injection (M*P) and a single injection (M) strategy. The soot was sampled by a developed total cylinder sampling system, and the dividing points of soot formation-dominant and oxidation-dominant phases were used for studying the impacts of post injection on the characteristics of in-cylinder soot. The physicochemical properties of the soot samples, including primary particle size, nanostructure, carbon chemical state and surface functional groups, were characterized. The soot reactivity was evaluated in terms of peak temperature, burnout temperature and apparent activation energy. In the oxidation-dominant phase, the M*P soot initially possesses smaller primary particle size, shorter fringe length, larger tortuosity, lower sp²/sp³ hybridization ratio of carbon atoms and higher content of aliphatic CH groups than the M soot. The beneficial influence of physicochemical properties on soot reactivity when using post injection is validated by the thermogravimetric data, which shows that the M*P soot is more reactive than the M soot at the onset of the oxidation-dominant phase. In the M*P case, the soot generated from the main-injection combustion has lower reactivity than the soot from the post-injection combustion after they experience the soot formation-dominant phase. The results indicate that the use of post injection leads to in-cylinder soot with physicochemical properties that favor reactivity. The enhancement of reactivity means that the soot will be more readily oxidized in the subsequent combustion process, and consequently contributes to a reduction in final soot emissions.