Application of ultrasound-assisted acid leaching procedures for major and trace elements determination in edible seaweed by inductively coupled plasma-optical emission spectrometry

A new method using diluted reagents (nitric and hydrochloric acids and oxygen peroxide) and ultrasound energy to assist metals acid leaching with from edible seaweed was optimized. The method uses a first sonication at high temperature with hydrochloric acid as a previous stage to an ultrasound-assisted acid leaching with 7 ml of an acid solution containing nitric acid, hydrochloric acid and hydrogen peroxide at concentrations of 3.7, 3.0 and 3.0 M, respectively. Optimum conditions for the first sonication step were ultrasound energy at 17 kHz, sonication temperature at 65 °C, an acid volume of 2 ml, an hydrochloric acid concentration of 6.0 M and a sonication time of 10 min. It has been found that the first sonication stage at high temperature with hydrochloric acid is necessary to obtain quantitative recoveries for As, Ba, Fe and V. Otherwise quantitative recoveries were reached for the other elements investigated (Ca, K, Na, Mg, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The repeatability of the ultrasound-assisted acid leaching method was around 10% for all elements. Adequate limit of detection and limit of quantification were reached by using inductively coupled plasma-optical emission spectrometry (ICP-OES) for measurements. The method resulted accurate after analysing several seaweed certified reference materials (IAEA-140/TM, NIES-03 and NIES-09). The method was finally applied to the multi-element determination in edible seaweed samples.     

Element-selective detection using capillary gas chromatography with atomic emission detection

Capillary GC coupled to an atomic emission detector (AED) provides a powerful new hyphenated technique for the separation and characterization of complex mixtures and compounds. The AED provides simultaneous and truly specific multi-element detection. The specificity of detection reduces the need for the complex sample pretreatment procedures which are necessary to reduce the interference from co-eluted substances which is experienced with detectors such as the FID and the ECD. A range of environmentally significant problems has been studied, including PCB analysis, the characterization of the reaction products of a novel waste treatment process, and the profiling of sulfur-containing species formed by the pyrolysis of various types of coal.     

Electronic structure of monosubstituted benzenes and X-ray emission spectroscopy

The electronic structure of the benzaldehyde molecule has been studied by X-ray emission spectroscopy. The gas-phase O-K- and C-K-spectra of this compound have been obtained. MNDO quantum-chemical calculations have been carried out. The structure of the MO's of benzaldehyde has been compared with those of benzene and formaldehyde molecules. The character of the p-p interaction of the phenyl and formyl fragments has been considered. The contribution of the latter to the highest occupied molecular orbitals of the-system has been shown to be small.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1033–1037, June, 1994.     

有机试液的电感耦合等离子体原子发射光谱分析 Ⅰ.实际应用的若干方面

本文从七个方面介绍了ICP-AES在有机试液直接分析中的应用:(1) 油类样品分析;(2) 酒样直接分析;(3) 溶剂萃取分离富集-ICP光谱分析;(4) 基于生成挥发性金属有机化合物的ICP进样方法;(5) 有机试液分析中的其它进样方法;(6) 有机介质中非金属元素的ICP-AES测定;(7) ICP-AES作为色谱法的检测器。     

A History of Fischer-Tropsch Wax Upgrading at BP—— from Catalyst Screening Studies to Full Scale Demonstration in Alaska

Conversion of Fischer-Tropsch wax into high quality synthetic crude or finished transportation fuels such as premium diesel has been studied over the past 15 years within BP. Catalyst screening and selection was carried out in dedicated micro-reactors and pilot plants, whose designs are critical to the performance selection. Variation in catalyst composition and defining the gas to oil feed ratios with the operating temperature are a few of the parameters studied. Product selection and maximizing diesel yield combined with stability (catalyst life) were the ultimate drivers. The selected catalyst was then tested under commercial conditions in a dedicated 300 barrel per day demonstration plant. The products were also tested in engines to assess their combustion characteristics.     

Preconcentration and atomic spectrometric determination of rare earth elements (REEs) in natural water samples by inductively coupled plasma atomic emission spectrometry

The usage of a variety of sorbents has been shown as promising matrix removal/preconcentration strategies for the determination of rare earth elements (REEs) in various natural water samples by inductively coupled plasma atomic emission spectrometry (ICP-AES). The sorption efficiency of various zeolites (clinoptilolite, mordenite, zeolite Y, zeolite Beta), ion-exchangers (Amberlite CG-120, Amberlite IR-120, Rexyn 101, Dowex 50W X18) and chelating resins (Muromac, Chelex 100, Amberlite IRC-718) towards REEs was investigated in terms of solution pH, shaking time and sorbent amount. The results have shown that most of the materials can take up REEs at a wide pH range. The experiments were continued with clinoptilolite, zeolite Y and Chelex 100 and it was demonstrated that all three materials displayed very fast kinetics for REE sorption (higher than 96% in 1 min). Desorption from the sorbents was realized with 2.0 M HNO₃ for clinoptilolite and 0.1 M HNO₃ for zeolite Y and Chelex 100. Only the lower concentration range (0.01-2.0 mg l⁻¹) of matrix-matched standards were used in quantitation although the calibration graphs were linear at least up to 10.0 mg l⁻¹ for all REEs studied. The limit of detection (3 s) without preconcentration was 0.1, 1.0, and 0.2 μg l⁻¹ for Eu, La, and Yb, respectively. The validity of the method with the selected sorbents was checked through spike recovery experiments.     

Fluorescence observations on complex formation between linear and hyperbranched polyelectrolytes in dilute aqueous solutions

The complexation between poly(ethylene imine) (PEI) and poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) or AMPS copolymers was investigated with the relative excimer emission intensity I_E/I_M of a cationic probe 1-pyrenemethylamine hydrochloride (PyMeA · HCl), fluorescence nonradiative energy transfer (NRET) I_Py/I_Np of naphthalene to pyrene labels, the fluorescence anisotropy r and I_E/I_M of pyrene labels. PEI was a hyperbranched weak polycation in acid solution, which formed complex with anionic polyelectrolytes due to the electrostatic attraction. The I_E/I_M of PyMeA · HCl probe decreased to zero, the intra-, intermolecular NRET I_Py/I_Np and I_E/I_M of pyrene labels on the AMPS copolymers reached their maxima when χ was increased from 0 to 2.4, which was defined as the mole ratio of the amino group in PEI to the AMPS group in the polyanion. These facts indicated the formation of nonstoichiometric complex of the oppositely charged polyelectrolytes when χ = 2.4 at the concentration much lower than their overlap concentrations. The intermolecular aggregate appeared as indicated by an increase in the intermolecular I_Py/I_Np and r with χ up to 2.4 due to neutralizing and hydrophobizing the polyelectrolytes and the bridging effect of the PEI chain bound on different polyanion chains. At high pH, PEI became a neutral polymer and did not bind with the AMPS anion to form the complex as illustrated by the constant value of r for the pyrene labels attached to the AMPS polyanion as that without addition of PEI. The amino group in PEI quenched pyrene and naphthalene emission, resulting a decrease in both I_Np and I_Py.     

Red–Green–Blue Trichromophoric Nanoparticles with Dual Fluorescence Resonance Energy Transfer: Highly Sensitive Fluorogenic Response Toward Polyanions

A red–green–blue (RGB) trichromophoric fluorescent organic nanoparticle exhibiting multi‐colour emission was constructed; the blue‐emitting cationic oligofluorene nanoparticle acted as an energy‐donor scaffold to undergo fluorescence resonance energy transfer (FRET) to a red‐emitting dye embedded in the nanoparticle (interior FRET) and to a green‐emitting dye adsorbed on the surface through electrostatic interactions (exterior FRET). Each FRET event occurs independently and is free from sequential FRET, thus the resultant dual‐FRET system exhibits multi‐colour emission, including white, in aqueous solution and film state. A characteristic white‐emissive nanoparticle showed visible responses upon perturbation of the exterior FRET efficiency by acceptor displacement, leading to highly sensitive responses toward polyanions in a ratiometric manner. Specifically, our system exhibits high sensitivity toward heparin with an extremely low detection limit.     

高荧光量子效率的分子分散型聚芴衍生物的放大自发发射特性

通过将掺杂剂单元用化学键接到聚芴的侧链上,实现了掺杂剂单元在高分子主体中的分子水平分散,开发了一种新型的基于掺杂剂/主体材料体系的分子分散型蓝光聚芴衍生物.与纯聚芴相比,这种新的分子分散型蓝光聚芴衍生物具有很高的荧光量子效率.以这种新的分子分散型蓝光聚芴衍生物为增益介质的激光器件,在Nd:YAG 355 nm脉冲激光泵浦下,获得了较好的放大自发发射光谱,阈值达到0.25 m J/(pulse cm2).从光物理的角度对薄膜的光学增益和光学损耗进行了定量运算和分析,经过拟合发现,当泵浦能量为0.06m J/pulse时,该聚芴衍生物增益系数可达23.08 cm-1,损耗系数为6.96 cm-1.优良的放大自发发射特性表明该聚芴衍生物是非常好的有机激光增益介质材料.