Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

Gas chromatographic determination of organolead compounds with an alternating current plasma detector

The performance of the gas chromatography/alternating current plasma detector as a selective detector for organolead compounds is investigated. The helium make-up flow rate and the spatial position from which the lead emission is viewed, have an effect on the detector response. The detection limit for tetrabutyl lead was established as 130 pg/s and the lead selectivity ratio was found to exceed 13,800. Some applications of organolead determination in complex matrices were also studied in order to demonstrate the selectivity and sensitivity of the alternating current plasma detector.     

Optoacoustic Laser Stark spectroscopy and FIR laser action on CH3Br using a waveguide CO2 laser

The optoacoustic spectrum of CH₃Br around 10 m band lines of a tunable cw waveguide CO₂ laser is investigated. Several new infrared absorptions are observed and most of the correspond ing molecular transitions are assigned. Far infra red laser action is reported by pumping with the same CO₂ laser: pump offsets are given using the Transferred Lambs dip (TLD) technique. A new FIR laser emission is obtained and assigned. An optoacoustic Laser Stark spectroscopy technique is used to investigate off resonance infrared tran sitions.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.     

Field and photo-field electron emission from self-assembled Ge–Si nanostructures with quantum dots

Monolayer and multilayer Ge nanocluster structures were prepared on Si(1 0 0) using molecular beam epitaxy. The cluster size was 10 nm and cluster density was 10¹⁰ cm⁻². A stable field electron emission was obtained from these structures, showing current peaks in the current–voltage characteristics, which may be attributed to the resonant electron tunneling via the energy levels of the nanocluster potential well. For cluster multilayers, the current–voltage curves also showed current peaks with a complex shape. The cluster multilayer structures had a considerable temperature sensitivity, as well as photosensitivity, in the wavelength range from 0.4 to 10 μm.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Evolution of lowest singlet and triplet excited states with transition metals in group 10-12 metallaynes containing biphenyl spacer

A new series of thermally stable group 10 platinum(II) and group 12 mercury(II) poly-yne polymers containing biphenyl spacer trans-[-Pt(PBu₃)₂CC(p-C₆H₄)₂CC-]_n and [HgCC(p-C₆H₄)₂CC-]_n were prepared in good yields by Hagihara’s dehydrohalogenation reaction of the corresponding metal chloride precursors with 4,4′-diethynylbiphenyl HCC(p-C₆H₄)₂CCH at room temperature. We report the optical spectroscopy of these polymetallaynes and compare the results with their bimetallic model complexes trans-[Pt(Ph)(PEt₃)₂CC(p-C₆H₄)₂CCPt(Ph)(PEt₃)₂] and [MeHgCC(p-C₆H₄)₂CCHgMe] as well as the group 11 gold(I) counterpart [(PPh₃)AuCC(p-C₆H₄)₂CCAu(PPh₃)]. The structural properties of all model complexes have been studied by X-ray crystallography. The influence of the heavy metal atom in these metal alkynyl systems on the intersystem crossing rate and the spatial extent of lowest singlet and triplet excitons is systematically characterized. Our investigations indicate that the organic triplet emissions can be harvested by the heavy-atom effect of group 10-12 transition metals (viz., Pt, Au, and Hg) which enables efficient intersystem crossing from the S₁ singlet excited state to the T₁ triplet excited state.     

Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Separation and determination of carnosine-related peptides using capillary electrophoresis with laser-induced fluorescence detection

A capillary electrophoresis (CE) method with laser-induced fluorescence (LIF) detection was developed for the separation and detection of carnosine-related peptides (carnosine, anserine, and homocarnosine). A sensitive and fluorogenic regent, 3-(4-carboxybenzoyl) quinoline-2-carboxaldehyde (CBQCA) was selected as a precapillary labeling reagent for imidazole dipeptides to form isoindole derivatives. The optimized molar ratio between CBQCA and peptide was found to be 75:1, and 50 mmol/L borate buffer (pH 9.2) was used for the derivatization in order to achieve good efficiency. Three imidazole dipeptides were baseline-separated within 20 min by using 112 mmol/L sodium borate (pH 10.4-10.8) as running buffer. Concentration detection limits (signal-to-noise ratios) for carnosine, anserine, and homocarnosine were 4.73, 4.37, and 3.94 nmol/L, respectively. This method has been applied to the analysis of human cerebrospinal fluid (CSF) and meat dry powder of pig and sheep. Recoveries were in the range of 82.9-104.8% for homocarnosine in CSF. For carnosine and anserine, the recoveries are 98.3% and 80.2% in meat dry powder of pig and 111.2% and 112.8% in meat dry powder of sheep, respectively.