Effect of scale and surface chemistry on the mechanical properties of carbon nanotubes‐based composites

In this article, Multi‐Walled Carbon Nanotubes (MWCNTs) of varying diameters, both untreated and polycarboxylated, were dispersed at constant weight percentage in an epoxy matrix, and resulting fracture toughnesses (K_Ic) were measured in each case. We show that changing the MWCNT diameter has two effects on the composite fracture toughness: (i) a small MWCNT diameter enables larger interfacial surface for adhesion maximization, which increases toughness; (ii) at the same time, it limits the available pull‐out energy and reduces the MWCNT ability to homogeneously disperse in the matrix due to this same large active surface: this decreases toughness. Most commercially available MWCNTs have a length range of several μm, thus an optimal diameter exists which depends on MWCNT wall thickness and surface treatment. Such optimal diameter maximizes pull‐out energy and thus composite fracture toughness. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and structure–property relationship of carbazole‐alt‐benzothiadiazole copolymers

A series of four π‐conjugated carbazole‐alt‐benzothiadiazole copolymers (PCBT) were prepared by Suzuki cross‐coupling reaction between synthesized dibromocarbazoles as electron‐rich subunits and 4,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)?2,1,3‐benzothiadiazole as electron‐deficient subunits. The subunits were directly linked through 2,7‐ or 3,6‐ positions of the carbazole. In addition, the carbazole monomers have been N‐substituted by a branched or a linear side‐chain. The chemical structure of the copolymers and their precursors was confirmed by NMR and IR spectroscopies, and their molar masses were estimated by SEC. Thermal analysis under N₂ atmosphere showed no weight loss below 329°C, and no glass transition was observed in between 0 and 250°C. The band gaps of all PCBTs evaluated by optical spectroscopies and by cyclic voltammetry analysis were consistent with expectations and ranged between 2.2 and 2.3 eV. Finally, 2,7 and 3,6 linkages were shown to influence optical properties of PCBTs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2059–2068     

Stochastic preference analysis in numerical preference relations

Numerical preference relations (NPRs) consisting of numerical judgments can be considered as a general form of the existing preference relations, such as multiplicative preference relations (MPRs), fuzzy preference relations (FPRs), interval MPRs (IV-MPRs) and interval FPRs (IV-FPRs). On the basis of NPRs, we develop a stochastic preference analysis (SPA) method to aid the decision makers (DMs) in decision making. The numerical judgments in NPRs can also be characterized by different probability distributions in accordance with practice. By exploring the judgment space of NPRs, SPA produces several outcomes including the rank acceptability index, the expected priority vector, the expected rank and the confidence factor. The outcomes are obtained by Monte Carlo simulation with at least 95% confidence degree. Based on the outcomes, the DMs can choose some of them which they find most useful to make reliable decisions.     

Effect of the structure of titanium–magnesium catalysts on the morphology of polyethylene produced

The structure and formation of polyethylene (PE) particles on supported titanium–magnesium catalysts having different structural characteristics (sizes of microcrystallites, mesopores, and subparticles) were studied for the first time. Scanning electron microscopy was used to identify structural elements of the polymer particles formed over such catalysts and to reveal morphological changes in the growing polymer particles when the yield was increased from approximately 0.2 g PE/g catalyst to approximately 13 kg PE/g catalyst. A relationship was found between structural characteristics of the porous catalyst particles, morphology of the nascent polymer particles, and bulk density of the polymer powder. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2298–2308     

Linear wave dispersion relation of a magnetized relativistic rectilinear electron beam-dielectric system

A general dispersion relation is derived for a relativistic rectilinear electron beam of arbitrary momentum distributions interacting with a dielectric in a guide magnetic field, on the basis of Maxwell equations and the relativistic Vlasov equation. The instability occurs when the beam velocity exceeds the wave phase velocity in the medium. The linear wave dispersion relation, growth rate, spatial growth rate are studied analytically for delta and Lorentzian distributions of beam momentums in detail. The results are of importance for a new kind of high-power microwave generation or amplification devices based on anomalous Doppler effect.     

带凹性生产成本运输问题的新随机规划模型及其求解

提出了一种新的能反映决策者满意度的随机变量序关系,并据此研究了随机不等式的确定性等价类,方法被称为满意度方法.最后将其应用于带凹性生产成本运输问题的求解中,并将方法与常用的机会约束方法进行比较,说明满意度法不仅合理可行,而且当决策者对约束条件的要求越高时,它所得最优值越优于机会约束法所得最优值.     

Preparation and solution properties of a novel cationic hydrophobically modified polyacrylamide for enhanced oil recovery

Abstract

A novel cationic water-soluble monomer allyldimethylisooctylammonium bromide (ADIAB) containing a short-chain alkane was synthesized successfully. This monomer was copolymerized with acrylamide and sodium acrylate to produce hydrophobically modified polyacrylamide (HMPAM) using solution polymerization without surfactants. The structures of monomer ADIAB and HMPAM were characterized with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Influence of preparation condition on viscosities of products was studied. The aqueous solution viscosity of the terpolymer was also investigated as functions of concentration, temperature and salinity. The results showed that when the temperature exceeds the 60?°C and NaCl concentration exceeds about 2000?mg/L, the temperature and salt tolerance characters of terpolymer were demonstrated. The enhanced oil recovery tests were initially carried out using homogeneous sandpack models.     

Quantum topology phase diagrams for molecules,clusters, and solids

The need to make more quantitative use of the total electronic charge density distribution is demonstrated in this short perspective. This is framed in the perspective of the ground breaking early work of Bader and coworkers, along with mathematicians who captured the essential nature of a molecule in a suitably compact form in real space. We see that this simple form is the Poincaré–Hopf relation for molecules and clusters and the Euler–Hopf relation in solids. Thom's theory of elementary catastrophes combined with the Poincaré–Hopf relation provides the inspiration for the new quantum topology. An alternative use of the Poincaré–Hopf relation, molecular recognition, is discussed. Quantum topology is then used to create a topology phase diagram for both molecules and solids. The author adds their perspectives of the huge potential of the quantum topology approach by demonstrating the ease with which new theoretical ideas can be generated. © 2013 Wiley Periodicals, Inc.     

Investigation on the Stability of the Dispersion System of Cross-Linked Polyacrylamide Microspheres

The salt resistance, temperature resistance, and shear stability of a cross-linked polyacrylamide microsphere system are studied by microfiltration, light diffraction analysis, and optical microscopy. The results show that other conditions being equal, the particle diameter of cross-linked polyacrylamide microspheres decreases with increased NaCl concentration. When NaCl concentration is lower than 10,000 mg/L, its effect on the plugging performance of a cross-linked polyacrylamide microsphere system in regard to the nuclear pore membrane is weak in comparison with a linked polymer solution, but the former system has better salt tolerance. Particle diameter decreases with increased swelling temperature. When the swelling temperature is below 90°C, its effect on the plugging performance of the cross-linked polyacrylamide microsphere system in regard to nuclear pore membrane is weak in comparison with the linked polymer solution, but has better temperature tolerance. Particle size shows little change, with shearing rate being increased, while the shape remains about the same and the effect of shearing on the plugging performance of the cross-linked polyacrylamide microsphere dispersion system in regard to the nuclear pore membrane is weak in comparison with the linked polymer solution, but has better shear stability. The salt tolerance, temperature tolerance, and shear stability of microspheres are associated with a particular cross-linked structure.