含不同形状内热源的圆管内纳米流体自然对流及换热数值研究

采用格子玻尔兹曼方法对有三种恒温热源(圆形、三角形、方形)参与的圆管内纳米流体(铜-水)自然对流进行数值研究.主要研究瑞利(Ra)数,纳米颗粒体积分数以及热源几何形状等控制参数对纳米流体的流动与传热的影响.结果发现纳米颗粒体积分数的增加有利于强化传热,且在Ra数较小时,平均努塞尔(Nu)数增加的幅度要优于Ra数较大的情...     

光衍射法研究水表面波的性质

将水的表面波视作一种正弦相位型光栅,导出了水表面波衍射光斑间距与其波长的关系,从而利用水表面波对激光的衍射测定了水波波长,确定了表面波成分,即在所用实验频率范围内毛细波占主导地位,验证了表面波的色散关系.     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384     

Effect of scale and surface chemistry on the mechanical properties of carbon nanotubes‐based composites

In this article, Multi‐Walled Carbon Nanotubes (MWCNTs) of varying diameters, both untreated and polycarboxylated, were dispersed at constant weight percentage in an epoxy matrix, and resulting fracture toughnesses (K_Ic) were measured in each case. We show that changing the MWCNT diameter has two effects on the composite fracture toughness: (i) a small MWCNT diameter enables larger interfacial surface for adhesion maximization, which increases toughness; (ii) at the same time, it limits the available pull‐out energy and reduces the MWCNT ability to homogeneously disperse in the matrix due to this same large active surface: this decreases toughness. Most commercially available MWCNTs have a length range of several μm, thus an optimal diameter exists which depends on MWCNT wall thickness and surface treatment. Such optimal diameter maximizes pull‐out energy and thus composite fracture toughness. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and structure–property relationship of carbazole‐alt‐benzothiadiazole copolymers

A series of four π‐conjugated carbazole‐alt‐benzothiadiazole copolymers (PCBT) were prepared by Suzuki cross‐coupling reaction between synthesized dibromocarbazoles as electron‐rich subunits and 4,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)?2,1,3‐benzothiadiazole as electron‐deficient subunits. The subunits were directly linked through 2,7‐ or 3,6‐ positions of the carbazole. In addition, the carbazole monomers have been N‐substituted by a branched or a linear side‐chain. The chemical structure of the copolymers and their precursors was confirmed by NMR and IR spectroscopies, and their molar masses were estimated by SEC. Thermal analysis under N₂ atmosphere showed no weight loss below 329°C, and no glass transition was observed in between 0 and 250°C. The band gaps of all PCBTs evaluated by optical spectroscopies and by cyclic voltammetry analysis were consistent with expectations and ranged between 2.2 and 2.3 eV. Finally, 2,7 and 3,6 linkages were shown to influence optical properties of PCBTs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2059–2068     

Effect of the structure of titanium–magnesium catalysts on the morphology of polyethylene produced

The structure and formation of polyethylene (PE) particles on supported titanium–magnesium catalysts having different structural characteristics (sizes of microcrystallites, mesopores, and subparticles) were studied for the first time. Scanning electron microscopy was used to identify structural elements of the polymer particles formed over such catalysts and to reveal morphological changes in the growing polymer particles when the yield was increased from approximately 0.2 g PE/g catalyst to approximately 13 kg PE/g catalyst. A relationship was found between structural characteristics of the porous catalyst particles, morphology of the nascent polymer particles, and bulk density of the polymer powder. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2298–2308     

Quantum topology phase diagrams for molecules,clusters, and solids

The need to make more quantitative use of the total electronic charge density distribution is demonstrated in this short perspective. This is framed in the perspective of the ground breaking early work of Bader and coworkers, along with mathematicians who captured the essential nature of a molecule in a suitably compact form in real space. We see that this simple form is the Poincaré–Hopf relation for molecules and clusters and the Euler–Hopf relation in solids. Thom's theory of elementary catastrophes combined with the Poincaré–Hopf relation provides the inspiration for the new quantum topology. An alternative use of the Poincaré–Hopf relation, molecular recognition, is discussed. Quantum topology is then used to create a topology phase diagram for both molecules and solids. The author adds their perspectives of the huge potential of the quantum topology approach by demonstrating the ease with which new theoretical ideas can be generated. © 2013 Wiley Periodicals, Inc.     

Investigation on the Stability of the Dispersion System of Cross-Linked Polyacrylamide Microspheres

The salt resistance, temperature resistance, and shear stability of a cross-linked polyacrylamide microsphere system are studied by microfiltration, light diffraction analysis, and optical microscopy. The results show that other conditions being equal, the particle diameter of cross-linked polyacrylamide microspheres decreases with increased NaCl concentration. When NaCl concentration is lower than 10,000 mg/L, its effect on the plugging performance of a cross-linked polyacrylamide microsphere system in regard to the nuclear pore membrane is weak in comparison with a linked polymer solution, but the former system has better salt tolerance. Particle diameter decreases with increased swelling temperature. When the swelling temperature is below 90°C, its effect on the plugging performance of the cross-linked polyacrylamide microsphere system in regard to nuclear pore membrane is weak in comparison with the linked polymer solution, but has better temperature tolerance. Particle size shows little change, with shearing rate being increased, while the shape remains about the same and the effect of shearing on the plugging performance of the cross-linked polyacrylamide microsphere dispersion system in regard to the nuclear pore membrane is weak in comparison with the linked polymer solution, but has better shear stability. The salt tolerance, temperature tolerance, and shear stability of microspheres are associated with a particular cross-linked structure.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.