Neutron dosimetry at low and high fluences with CR-39

In the Laboratory of Nuclear Microanalysis, we have developed two techniques for neutron dosimetry; the first for low fluence, the second for high fluence. These two techniques use a Solid State Nuclear Track Detector (SSNTD): the CR-39. The low fluence technique is based on the measurement of etched tracks resulting from a neutron-proton conversion. A Monte Carlo code performs a simulation of the (n,p) collision in the detector, and a numerical computer code of latent track etching allows the evaluation of the etched track parameters. The object of this is to obtain characteristics of a neutron fluence from the measured etched track parameters. When there is a high fluence and high doses, CR-39 is unsuited for optical microscopy analysis. This is because of track overlapping which makes it impossible to carry out counting and exploitation. We have therefore developed a new method permitting the reading of samples based on the measurement of the angular distribution of coherent light (He---Ne laser) transmitted through the irradiated etched SSNTD. We present these two techniques and our initial results.     

利用双光子吸收效应测量激光脉冲的相干时间

研究了利用反向泵浦－探测双光子吸收材料的方法来测量脉冲激光的相干时间，并测量量了２３ｐｓ，５３２ｎｍ Ｎｄ：ＹＡＧ激光脉冲的相干时间。实验和理论分析表明，光束相干作用增加了双光子吸收，利用此方法可测量其它脉宽激光的相干时间。     

MINIMUM PERIOD CONTROL PROBLEM FOR INFINITE DIMENSIONAL SYSTEM

ＭＩＮＩＭＵＭＰＥＲＩＯＤＣＯＮＴＲＯＬＰＲＯＢＬＥＭＦＯＲＩＮＦＩＮＩＴＥＤＩＭＥＮＳＩＯＮＡＬＳＹＳＴＥＭＰＡＨＬＩＰＩＮＧＬＩＸＵＮＪＩＮＧＭａｎｕｓｃｒｉｐｔｒｅｃｅｉｖｅｄＤｅｃｅｍｂｅｒ１２，１９９４．ＲｅｖｉｓｅｄＡｐｒｉｌ１６...     

关于刚体转动惯量测定的计时方法研究

本文给出了在刚体转动惯量的测定中测定时间的计时装置，减小了计量时间所带来的误差。     

一类非线性时序模型非遍历性的一个充分条件

本文研究了一类由紧算子与加性i.i.d.干扰确定的非线性时间序列的非遍历性,揭示了这类非线性时间序列的非遍历性与其相应确定性部分的Lyapunov函数之间的联系。     

The fully Sinc‐Galerkin method for time‐dependent boundary conditions

The fully Sinc‐Galerkin method is developed for a family of complex‐valued partial differential equations with time‐dependent boundary conditions. The Sinc‐Galerkin discrete system is formulated and represented by a Kronecker product form of those equations. The numerical solution is efficiently calculated and the method exhibits an exponential convergence rate. Several examples, some with a real‐valued solution and some with a complex‐valued solution, are used to demonstrate the performance of this method. © 2004 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2004     

Tanaka Formula for Multidimensional Brownian Motions

We study the Tanaka formula for multidimensional Brownian motions in the framework of generalized Wiener functionals. More precisely, we show that the submartingale U(B _t –x) is decomposed in the sence of generalized Wiener functionals into the sum of a martingale and the Brownian local time, U being twice of the kernel of Newtonian potential and B _t the multidimensional Brownian motion. We also discuss on an aspect of the Tanaka formula for multidimensional Brownian motions as the Doob–Meyer decomposition.     

Air traverse time in grain bins

To maintain the quality of cereal grains during storage, it is necessary to keep the grain cool and free from insects, and typical methods for dealing with these problems are considered in this paper. In particular the insect population is controlled by fumigating the grain bed with carbon dioxide gas and the grain is cooled by forcing ambient air through the bed. In both problems, the equations which describe the physical processes contain a mixture of advection and diffusion or conduction terms. This paper explores the relationship between traverse time and heat and mass transfer and gains an insight into the grain storage processes that are controlled by forced convection. When heat and mass transport is dominated by the advection terms, the equations are simplified by changing variables from the (x,y) space coordinates to (ψ,τ), where ψ is the stream function for the problem and the traverse time τ at a point in the storage bin is the time taken for the air to travel to the point from the inlet duct. The conditions are described for the equations to be independent of ψ, with the main condition being that the derivatives of the metrics g₁₁, g₁₂ and g₂₂ with respect to ψ are small enough. If the equations are independent of ψ then the dependent variable (concentration or temperature) will be constant on lines of constant traverse time τ. This relationship between traverse time and the cooling or fumigation pattern can be used in the design of storage bins since it implies that the best outlet surface is a line of constant τ.     

Two-storage inventory model with lot-size dependent fuzzy lead-time under possibility constraints via genetic algorithm

Multi-item inventory models with stock dependent demand and two storage facilities are developed in a fuzzy environment where processing time of each unit is fuzzy and the processing time of a lot is correlated with its size. These are order-quantity reorder-point models with back-ordering if required. Here possibility and crisp constraints on investment and capacity of the small storehouse respectively are considered. The models are formulated as fuzzy chance constrained programming problem and is solved via generalized reduced gradient (GRG) technique when crisp equivalent of the constraints are available. A genetic algorithm (GA) is developed based on fuzzy simulation and entropy where region of search space gradually decreases to a small neighborhood of the optima and it is used to solve the models whenever the equivalent crisp form of the constraint is not available. The models are illustrated with some numerical examples and some sensitivity analyses have been done. For some particular cases results observed via GRG and GA are compared.     

修理设备可更换且有修理延迟的N部件串联系统分析

假定部件的寿命服从指数分布,修理延迟时间和修理时间均服从任意分布,并且修理设备的寿命服从指数分布,其更换时间服从任意分布的情况下,利用马尔可夫更新过程理论和拉普拉斯变换工具,研究了修理有延迟且修理设备可更换的n部件串联可修系统,求得了系统的可用度和(0,t]时间内的平均故障次数.进一步,在定义修理设备“广义忙期”下,利用全概率分解,提出了一种新的分析技术,讨论了修理设备的可靠性指标,得到修理设备的一些重要可靠性结果.