Experimental Investigation of Natural Convection in Inclined Channel in Presence of Electrostatic Field

The influence of external electrohydrodynamic forces on natural convection from a flat plate has been studied. Temperature distribution in the aforementioned channel at α = 45°, 90°, and 150° angles in different 10-, 12-, and 15-kV electrostatic fields has been reviewed. Corona wind and the shape of the created vortex by electrohydrodynamics were detected. The results showed that heat transfer was enhanced by increasing the electrostatic field in all angles. In the presence of the field, enhancement of heat transfer of the plate at acute angles is better than for obtuse ones. The optimal angle in terms of heat transfer was 45°, noting heat transfer improvement by 61%.     

高压直流断路器测控装置的设计与试验分析

直流输(配)电是目前电网发展的趋势,而高压直流断路器的研发是影响其发展的关键技术之一。测量与控制装置的研究是高压直流断路器的研发要点。采用高压电力电子器件,DSP+FPGA相结合的控制方式,对其测控装置进行研究分析,提出了区间阈值的控制方法及相应的控制时序,从高压直流输电、能源多样化的发展需求入手,将机械开关和固态开光相结合,设计了一套混合式高压直流断路器样机。通过对样机进行合分闸试验及故障分闸试验,证明了所研制的高压直流断路器样机具有分闸动作快,限弧能力强,动作一致性好等优点。     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Frequency-locking and threshold current-lowering effects of a quantum cascade laser and an application in gas detection field

In this paper,the frequency-locking and threshold current-lowering effects of a quantum cascade laser are studied and achieved.Combined with cavity-enhanced absorption spectroscopy,the noninvasive detection of H_2 with a prepared concentration of 500 ppm in multiple dissolved gases is performed and evaluated.The high frequency selectivity of 0.0051 cm~(-1) at an acquisition time of 1 s allows the sensitive detection of the(1-0) S(l) band of H_2 with a high accuracy of(96.53±0.29)%and shows that the detection limit to an absorption line of 4712.9046 cm~(-1) is approximately(17.26±0.63) ppm at an atmospheric pressure and a temperature of 20 ℃.     

Comprehensive separation of iridoid glycosides and triterpenoid saponins from Dipsacus asper with salt‐containing solvent by high‐speed countercurrent chromatography coupled with recycling mode

The roots of Dipsacus asper Wall as a commonly used traditional Chinese medicine are used for tonifying liver and kidney and strengthening bones and muscles. However, an effective separation strategy for comprehensive and rapid separation of the main active compounds from the roots of D. asper is nonexistent. This investigation provided an effective separation method based on AB‐8 macroporous resin column chromatography using different ratios of ethanol in water and two different modes of high‐speed countercurrent chromatography with salt‐containing solvent system for rapid enrichment and separation from the roots of D. asper. The macroporous resin column chromatography was performed on AB‐8 resin using ethanol in water ratios of 10, 30, 40, 50, and 80% as the optimized enrichment conditions for iridoid glycosides and triterpenoid saponins with different polarities. For high‐speed countercurrent chromatography separation, the conventional and recycling modes were combined together to develop a strategy for 12 compounds ( 1 – 12 ) from the enriched parts of 30, 40, and 80% ethanol, including six high‐polarity iridoid glycosides ( 1 – 6 ) using inorganic salt‐containing solvent system and six triterpenoid saponins ( 7 – 12 ). Recycling high‐speed countercurrent chromatography separation was successfully applied to separate two isomers ( 9 and 10 ) after 11 cycles.     

高韧性合金钢断裂韧性及疲劳裂纹扩展门槛值的联合试验方法

在柴油机曲轴、连杆等关键零部件的可靠性设计和失效评估中,断裂韧性及疲劳裂纹扩展门槛值分别是衡量材料抵抗裂纹失稳扩展和裂纹开始扩展的重要指标．但是,对于高韧性合金材料,难以通过常规试验所推荐的厚度确定平面应变断裂韧性,而门槛值的测定通常不但非常耗时,且难以直接应用于不同循环特性的实际结构．本文针对高韧性合金钢34CrNi3MoA,提出一种将断裂韧性和疲劳裂纹扩展门槛值试验合二为一的试验方法,即用同一个试件可以同时测定门槛值和断裂韧性．利用断裂韧性关于试件厚度的渐近特性,以几种较薄试件的试验,确定平面应变状态下的断裂韧性．试验结果还表明,裂纹扩展门槛值的试件厚度依存性可以忽略,并给出了任意循环特性（应力比）下的门槛值计算公式．     

基于光滑粒子流体动力学的滑油泵数值仿真

基于光滑粒子流体动力学方法,构建齿轮泵壳体及内部流体的粒子模型,对内啮合齿轮泵在不同工况下的流量特性进行数值模拟。首先设置了均匀分布的油泵出入口压强,计算得到的流量结果与试验结果吻合,且在中低转速下流量与转速呈线性关系;针对高转速下油泵流量降低的问题,通过适当减小周期模型内部的流体粒子数反映流量降低,获得了与试验值相吻合的连续转速流量的模拟结果;针对影响齿轮泵性能的间隙和空化现象,结合模型特点给出了相应的近似处理方法。通过以上研究,将SPH方法成功地应用于滑油泵问题的分析计算。     

抽真空获取1.8K超流氦方案分析以及真空泵抽速的预测

低温地面支持系统(CGSE)是专为AMS-02国际合作科学实验项目开发研究的低温地面支持和冷却系统,该系统要完成将AMS-02超导磁体从环境温度到1.8K的冷却过程,超流氦(HeII)的获得是其重要环节。文中针对抽真空获取HeII的方案进行了比较详细的分析和计算,同时针对此方案给出了其物理过程的T-s图、流程简图和实现该过程的主要设备。最后针对此方案,对真空泵抽速进行了预测,这将对后续阶段真空泵的选型具有指导意义。     

中国出境旅游的外交效应

2000年以来,中国出境旅游高增长、高消费,影响力不断增大,成为国家外交战略的重要内容,外交效应逐渐显现。通过辨析中国出境旅游外交效应的概念、表现形式和结果,基于10个中国主要出境目的国的旅游互动数据,采用DIF-GMM计量经济模型,实证检验了中国出境旅游外交效应。结果表明,中国通过有序推进ADS协议、加强经济援助、举办“旅游年”活动、实施旅游“制裁”,并积极参与国际制度建设等旅游外交行为,促进了与世界各国的友好交往,维护了自身核心利益,提升了外交软实力和国际影响力。国际旅游反作用于国际关系,对国际关系具有显著的正向促进作用,不仅是国际关系的结果,而且是其重要动因之一。中国出境旅游与政治、经济、社会、文化等联动,多方面提升了中国的国际影响力。     

Canny算法的改进及其硬件的实现

传统的Canny边缘检测算法是先对图像进行平滑,然后利用二维滤波器计算图像的梯度值,从而得到梯度直方图。通过基于梯度直方图来选取双阈值,最后进行基于双阈值的非极大值抑制,得到边缘检测的图像。为了能很方便地在硬件中实现这种算法,对传统的Canny算法进行了适当的改进,利用模板来代替原算法中的卷积,从而使得该算法在FPGA(Field Programmable Gate Array)中可以完全利用原理图来实现。