Triallylstannyllithium-allyllithium as an initiator for the anionic reversible chain transfer polymerization of 1,3-butadiene

The anionic polymerization of 1,3-butadiene using a novel metalloidal anion initiator, triallylstannyllithium (TALi)-allyllithium (ALi), was studied. The TALi-ALi initiated anionic polymerization of 1,3-butadiene gave the star polymer along with the linear polybutadiene (PBD). The star polymer consisted of three PBD branches and a central tin atom. What is striking is a fact that the number-average molecular weights (M_n) and molecular weight distribution of three PBD branches and linear PBD were almost identical. A reversible chain transfer polymerization mechanism, which includes the equilibrium between tri(macroallyl)-stannyllithium and macroallylic anion, is proposed. © 1996 John Wiley & Sons, Inc.     

Thermodynamic behavior of polyelectrolytes with the lower critical solution temperature (LCST) phenomenon

A series of vinyl polymers with L-valine and L-leucine residues, and related copolymers with N-isopropylacrylamide, were studied in aqueous solution at different temperatures (25, 30 and 35°C) and at two ionic strengths (0.01 M and 0.1 M NaCl). The protonation behavior revealed great differences between the polymers that were attributed to the size of the hydrophobic lateral group. Macromolecular shrinkage, occurring above a critical degree of protonation β, was related to hydrophobic forces outweighing the electrostatic repulsions between COO – groups. Low salt concentrations increased the electrostatic potential while high temperatures increased the hydrophobic interaction at lower β. The release of fewer water molecules structured around the polymer chain, responsible for the lower critical solution temperature phenomenon, revealed lower entropy changes at higher temperatures. The reversible configuration of graft polymer chains instantly responded to changes in pH and temperature, modifying the water filtration rates through the pores of cellulose membranes.     

制冷机冷却型小型超导强磁场系统的研制

介绍了一套制冷机冷却型小型超导强磁场系统。超导磁体线圈用铌钛超导线绕制,室温孔直径为75mm,磁场中心Φ25mm×250mm区域内最高场强达到3.64T,磁场不均匀性小于3%。在2.62T场强下连续闭环运行了20天,电流衰减率近似为零。采用4K级低温制冷机冷却防辐射冷屏,液氦蒸发率小于0.03升/小时,系统一次可注入液氦50升,补液周期大于60天。     

非强占优先权下的M/M/1排队

分析带有两个优先权的非强占M/M/1系统的性能,用补充变量法构造向量马尔可夫过程对此排队系统的状态转移方程进行分析,得到两类顾客在非强占优先权的队长联合分布的母函数,进一步讨论,得出了服务台被两类顾客占有和闲置的概率以及两类信元各自的平均队长.     

配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

Morris-Lecar系统中通道噪声诱导的自发性动作电位研究

在生物物理学中, 越来越多的现象是由于分段确定性的动力系统与连续时间马氏过程之间的耦合作用而产生的. 因为这种耦合性, 相关的数学模型更适合取为随机混合系统而不是扩散过程(基于It?随机微分方程). 本文从理论上和数值上研究了在弱噪声条件下无鞍点状态的随机混合Morris-Lecar系统中, 由通道噪声诱导的自发性放电现象. 一个动作电位的初始阶段可视为噪声诱导的逃逸事件, 其最优路径和拟势可由辅助Hamilton系统给出. 由于系统不存在鞍点, 因此可选择虚拟分界线(ghost separatrix)为阈值, 研究噪声诱导的自静息态的逃逸事件. 通过计算在阈值处的拟势, 便可发现其值有一个明显的最小值, 其作用类似于鞍点. 通过改进的Monte Carlo模拟方法, 计算了历程概率分布, 其结果对初始阶段和兴奋阶段的理论解均给出了验证. 此外, 基于前人将拟势等高线作为阈值的另一种选择, 我们对两种阈值取法的优劣性进行了比较. 最后, 本文研究了钠离子和钾离子通道噪声的不同组合对最优路径和拟势的影响. 结果表明: 钾离子通道噪声在自发性放电过程中起主导作用, 且两种噪声强度存在一个最优比例能使总的噪声强度达到最小.      

On the inflation and deflation dynamics of liquid-filled,hyperelastic balloons

We derive a reduced-order model describing the inflation and deflation dynamics of a liquid-filled hyperelastic balloon, focusing on inviscid laminar flow and the extensional motion of the balloon. We initially study the flow and pressure fields for dictated motion of the solid, which throughout deflation are obtained by solving the potential problem. However, during inflation, flow separation creates a jet within the balloon, requiring a different approach. The analyses of both flow regimes lead to a simple piecewise model, describing the fluidic pressure during inflation and deflation, which is verified by finite element computations. We then use a variational approach to derive the equation describing the interaction between the extensional mode of the balloon and the entrapped fluid, yielding a nonlinear hybrid oscillator equation. Analytical and graphical investigations of the suggested model are presented, shedding light on its static and dynamic behaviour under different operating conditions. Our simplified model and its underlying assumptions are verified utilizing a fully coupled finite element scheme, showing excellent agreement.     

Stochastic sensitivity analysis of coupled acoustic-structural systems under non-stationary random excitations

This paper presents a new sensitivity analysis method for coupled acoustic–structural systems subjected to non-stationary random excitations. The integral of the response power spectrum density (PSD) of the coupled system is taken as the objective function. The thickness of each structural element is used as a design variable. A time-domain algorithm integrating the pseudo excitation method (PEM), direct differentiation method (DDM) and high precision direct (HPD) integration method is proposed for the sensitivity analysis of the objective function with respect to design variables. Firstly, the PEM is adopted to transform the sensitivity analysis under non-stationary random excitations into the sensitivity analysis under pseudo transient excitations. Then, the sensitivity analysis equation of the coupled system under pseudo transient excitations is derived based on the DDM. Moreover, the HPD integration method is used to efficiently solve the sensitivity analysis equation under pseudo transient excitations in a reduced-order modal space. Numerical examples are presented to demonstrate the validity of the proposed method.     

三维非连续变形分析方法碰撞分析及其应用

将具有完备动力学理论的非连续变形分析(DDA)方法应用于块体碰撞研究。基于三维DDA(3D DDA)方法,按时步输出块体碰撞过程速度变化和接触嵌入量,进而得到块体碰撞恢复系数、冲量、冲击力。以此为参考指标,采用斜抛、面-面对心等碰撞模型,验证3D DDA方法模拟块体碰撞的有效性,并将3D DDA方法应用于多米诺骨牌倾倒、滚石边坡成灾及防护等算例分析,探讨了多米诺骨牌倾倒机制、滚石启动及运动行为、滚石灾害防护方案。结果表明:多米诺骨牌间距越大,同一块体被碰撞时间越迟,其最终稳定时间也越迟,与下一块体碰撞的动能越大;滚石运动呈侧向平动及转动三维运动特征,每一次碰撞,均引起动能、轨迹或状态的显著变化;滚石拦挡设施弹簧刚度越大,越先达到最大冲击力,最大冲击力随弹簧刚度的增加而减小;可结合树木阻挡效应,耗散滚石动能,降低滚石飞跃高度,使滚石灾害减轻或控制在防护范围以内。     

大型偏心结构吊装欠约束问题研究

吊装施工过程中被吊模块的水平度是作业要求的重要指标,通常需要增加配重调平。传统有限元方法需要补充约束以消除单元刚体位移,且需要重复计算平衡方程来求解调平载荷,效率不高。将模块的运动分解为随动坐标系的整体运动以及相对该坐标系的弹性变形,可将欠约束问题化为多体系统的静平衡问题。基于虚功率原理推导了吊装平顺时刻的节点力平衡方程以及相应的切线刚度矩阵,并将配重表示为基础配重与载荷系数相乘的形式。通过对节点力平衡方程求导,得到一组以载荷系数为自变量的微分方程,通过求解微分方程并结合水平度判据,可快速搜寻满足水平度要求的载荷系数。数值算例表明,该方法在解决偏心模块吊装欠约束问题方面具有明显的优势,在确定配重载荷方面具有较快的速度和合理的精度。