Effects of evaporation velocity and film thickness on poly(3‐hexylthiophene) thin films processed from aggregate dispersions in binary solvent mixtures

Aggregate dispersions of P3HT in two series of solvent mixtures, chloroform:dichloromethane and toluene:dichloromethane, are used to study the impact of the evaporation velocity and film thickness on the P3HT films processed using two spin‐coating speeds (1000 rpm and 2000 rpm). The structural order and surface morphology were investigated with UV/Vis absorption spectroscopy and atomic force microscopy techniques. There is no evidence that the characteristics of the liquid phase P3HT dispersions impact the structures of the films, which is in agreement with a previous study of drop cast P3HT films that were dried over much longer time periods. An association is observed between the extent of aggregation in the liquid phase and the thickness and surface roughness parameters of the films. However, the structural order does not correlate with the thickness of the films, which was previously reported for polymer films processed from amorphous polymer solutions in pure organic solvents. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 330–343     

Synthesis and morphology investigations of a novel alkyne‐functionalized diblock copolymer

We reported the synthesis and morphology of a novel alkyne‐functionalized diblock copolymer (di‐BCP) poly(methyl methacrylate‐random‐propargyl methacrylate)‐block‐poly(4‐bromostyrene). The di‐BCPs were synthesized by atom transfer radical polymerization and postpolymerization deprotection, with good control over molecular weight and polydispersity index. Microphase separation in bulk di‐BCPs was confirmed by thermal analysis, small‐angle X‐ray scattering, and transmission electron microscopy. Microphase‐separated morphologies were also observed in thin films, and the orientation of the microdomains can be conveniently controlled by annealing under different solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A comparison of magnetic resonance imaging methods for fluid content imaging in porous media

Quantitative measurements are important for imaging fluid content in porous media. Conventional MRI methods suffer from contrast because of relaxation times in porous media, resulting in measurements of apparent fluid content, not the true fluid content. We compare four magnetic resonance imaging methods for fluid content imaging in several water‐saturated reservoir core plugs: frequency‐encoded spin echo, single point ramped imaging with T₁ enhancement, hybrid spin echo single point imaging (SE‐SPI), and T₂ mapping SE‐SPI. 1‐D profiles obtained with each method were compared in terms of image quality, image sensitivity, and quantification of water content. The image quality of short T₂ lifetime samples suffered from blurring in hybrid SE‐SPI images. Image sensitivity was the highest in the profiles obtained with frequency‐encoded spin echo. The quantification of frequency‐encoded spin echo, T₂ mapping SE‐SPI, and hybrid SE‐SPI suffered in core plugs with a significant population of short T₂ components because of T₂ attenuation. Overall, single point ramped imaging with T₁ enhancement was found to be the most general method for fluid content imaging. Copyright © 2013 John Wiley & Sons, Ltd.     

Tuning the frontier molecular orbital energy levels of n‐type conjugated copolymers by using angular‐shaped naphthalene tetracarboxylic diimides,and their use in all‐polymer solar cells with high open‐circuit voltages

An angular‐shaped naphthalene tetracarboxylic diimide (NDI) was designed and synthesized as a new building block for n‐type conjugated polymers to tune their energy levels. Three n‐type copolymers incorporating this angular‐shaped NDI as the acceptor moiety were obtained by Stille coupling reactions and had number average molecular weights of 18.7–73.0 kDa. All‐polymer bulk‐heterojunction solar cells made from blends of these polymers with poly(3‐hexylthiophene) gave a power conversion efficiency up to 0.32% and exhibited an open‐circuit voltage (V_oc) up to 0.94 V due to their relative high‐lying lowest unoccupied molecular orbital energy levels. The high V_oc of 0.94 V is higher than that of solar cells based on linear‐shaped NDI‐containing polymers (<0.6 V). The results indicate that the angular‐shaped NDI is a promising building block for constructing nonfullerene polymer acceptors for solar cells with high open‐circuit voltages. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and properties of phenothiazylene vinylene‐based polymers: New organic semiconductors for field‐effect transistors and solar cells

A series of new phenothiazylene vinylene‐based semiconducting polymers, poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene] ( P1 ), poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐1,4‐phenylene vinylene] ( P2 ), and poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐2,5‐thienylene vinylene] ( P3 ), have been synthesized via a Horner‐Emmons reaction. FTIR and ¹H NMR spectroscopies confirmed that the configurations of the vinylene groups in the polymers were all‐trans (E). The weight‐averaged molecular weights (M_w) of P1 , P2 , and P3 were found to be 27,000, 22,000, and 29,000, with polydispersity indices of 1.91, 2.05, and 2.25, respectively. The thermograms for P1 , P2 , and P3 each contained only a broad glass transition, at 129, 167, and 155 °C, respectively, without the observation of melting features. UV–visible absorption spectra of the polymers showed two strong absorption bands in the ranges 315–370 nm and 450–500 nm, which arose from absorptions of the phenothiazine segments and the conjugated main chains. Solution‐processed field‐effect transistors fabricated from these polymers showed p‐type organic thin‐film transistor characteristics. The field‐effect mobilities of P1 , P2 , and P3 were measured to be 1.0 × 10^?4, 3.6 × 10^?5, and 1.0 × 10^?3 cm² V^?1 s^?1, respectively, and the on/off ratios were in the order of 10² for P1 and P2 , and 10³ for P3 . Atomic force microscopy and X‐ray diffraction analysis of thin films of the polymers show that they have amorphous structures. A photovoltaic device in which a P3 /PC₇₁BM (1/5) blend film was used as the active layer exhibited an open‐circuit voltage (V_OC) of 0.42 V, a short circuit current (J_SC) of 5.17 mA cm^?2, a fill factor of 0.35, and a power conversion efficiency of 0.76% under AM 1.5 G (100 mW cm^?2) illumination. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 635–646, 2010     

Characterizing fracture energy of proton exchange membranes using a knife slit test

Pinhole formation in proton exchange membranes (PEM) may be caused by a process of flaw formation and crack propagation within membranes exposed to cyclic hygrothermal loading. Fracture mechanics can be used to characterize the propagation process, which is thought to occur in a slow, time‐dependent manner under cyclic loading conditions, and believed to be associated with limited plasticity. The intrinsic fracture energy has been used to characterize the fracture resistance of polymeric material with limited viscoelastic and plastic dissipation, and has been found to be associated with long‐term durability of polymeric materials. Insight into this limiting value of fracture energy may be useful in characterizing the durability of proton exchange membranes, including the formation of pinhole defects. In an effort to collect fracture data with limited plasticity, a knife slit test was adapted to measure fracture energies of PEMs, resulting in fracture energies that were two orders of magnitude smaller than those obtained with other fracture test methods. The presence of a sharp knife blade reduces crack tip plasticity, providing fracture energies that may be more representative of the intrinsic fracture energies of the thin membranes. Three commercial PEMs were tested to evaluate their fracture energies (G_c) at temperatures ranging from 40 to 90 °C and humidity levels varying from dry to 90% relative humidity (RH). Experiments were also conducted with membrane specimens immersed in water at various temperatures. The time temperature moisture superposition principle was applied to generate fracture energy master curves plotted as a function of reduced cutting rate based on the humidity and temperature conditions of the tests. The shift with respect to temperature and humidity suggests that the slitting process is viscoelastic in nature. Also such shifts were found to be consistent with those obtained from constitutive tests such as stress relaxation. The fracture energy is more sensitive to temperature than on humidity. The master curves converge at the lowest reduced cutting rates, suggesting similar intrinsic fracture energies; but diverge at higher reduced cutting rates to significantly different fracture energies. Although the relationship between G_c and ultimate mechanical durability has not been established, the test method may hold promise for investigating and comparing membrane resistance to failure in fuel cell environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 333–343, 2010     

Effects of the acceptor conjugation length and composition on the electrical memory characteristics of random copolyimides

Resistive‐switching memories based on copolyimides (coPIs), PI‐NTCDIX and PI‐BTCDIX , with different compositions of 4,4′‐diamino‐4″‐methyltriphenylamine ( AMTPA ), 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, and N,N′‐bis‐(4‐aminophenyl)‐1,8:4,5‐naphthalenetetracarboxydiimide ( NTCDI ) or N,N′‐bis‐(4‐aminophenyl)‐1,2:4,5‐benzenetetracarboxydiimide ( BTCDI ) have been developed. By varying the feed ratio of monomers, PI‐NTCDIX and PI‐BTCDIX showed tunable optical and electronic properties through the charge transfer (CT) between AMTPA and NTCDI or BTCDI . The memory devices based on PI‐NTCDIX exhibited the tunable electrical bistability from the volatile dynamic random access memory to nonvolatile write once read many memory characteristics as the NTCDI composition increased. The OFF/ON electrical switching transition was mainly attributed to the CT mechanism for the charge separated high conductance, based on the analysis of model compounds and density functional theory calculation. Also, the volatility of the memory device depended on the stability of CT complex. The long conjugation and high electron affinity of the NTCDI moiety stabilized the radical anion generated in the CT complex and prevented the recombination of segregated radical species even through applying the high positive or negative voltage. On the other hand, the memory devices based on PI‐BTCDIX showed a rather unique behavior compared with those based on PI‐NTCDIX . At the low BTCDI composition, the device exhibited volatile memory property. However, no switching behavior was observed at the high BTCDI composition due to the low highest occupied molecular orbital energy level of BTCDI . Combining these results and our previous study on perylenebisimide ( PBI ), we concluded that memory characteristics could be tailored by changing the conjugation length ( PBI > NTCDI > BTCDI ) and the acceptor composition in random coPIs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photoluminescent energy transfer from poly(phenyleneethynylene)s to near‐infrared emitting fluorophores

Photoluminescent energy transfer was investigated in conjugated polymer‐fluorophore blended thin films. A pentiptycene‐containing poly(phenyleneethynylene) was used as the energy donor, and 13 fluorophores were used as energy acceptors. The efficiency of energy transfer was measured by monitoring both the quenching of the polymer emission and the enhancement of the fluorophore emission. Near‐infrared emitting squaraines and terrylenes were identified as excellent energy acceptors. These results, where a new fluorescent signal occurs in the near‐infrared region on a completely dark background, offer substantial possibilities for designing highly sensitive turn‐on sensors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3382–3391, 2010     

An Interpenetrated Framework Material with Hysteretic CO2 Uptake

A new, twofold interpenetrated metal–organic framework (MOF) material has been synthesized that demonstrates dramatic steps in the adsorption and hysteresis in the desorption of CO₂. Measurement of the structure by powder X‐ray diffraction (PXRD) and pair distribution function (PDF) analysis indicates that structural changes upon CO₂ sorption most likely involve the interpenetrated frameworks moving with respect to each other.     

Regiospecific oxidation of an alkyl group of aromatic amine to carbonyl group by DDQ in aq.medium

The regiospecific oxidation of alkyl group of both sterically hindered and unhindered aromatic amine to corresponding carbonyl compound was done in aq. medium by using DDQ. The optimized reaction protocol was found to be most simple, high yielding and novel method for oxidation of alkyl group of aromatic amine in to its carbonyl compound.