Electrostatic interaction between ion-penetrable membranes in a salt-free medium

A set of coupled equations is given which determines the distributions of the electric potential and counterions in a system of two interacting identical ion-penetrable membranes of thickness d at separation h immersed in a salt-free medium containing only counterions. The solution to these coupled equations also gives the electrostatic repulsive force between the membranes. It is shown that the interaction force remains finite at h-->0, unlike the case of the interaction between two planar charged surfaces (d-->0), and that the interaction force becomes independent of the membrane fixed charge and membrane thickness d at very large h. Finally, an approximate single transcendental equation giving the solution to the coupled equations is derived.     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Thermoanalytical methods in the study of inorganic thin films

Thermoanalytical (TA) methods are relatively seldom applied for assessing the physical and chemical proeprties of thin films, but they can be used in studies of composition, phase transitions and film—substrate interactions. In the present paper the possibilities of TA methods in thin film studies are reviewed. The thermoanalytical methods considered are the classical TG and DTA/DSC methods but some complementary methods will also be briefly mentioned. The main emphasis is given to true thin films. Details of sample preparation are also given. An important application of TA methods is characterization of precursors for the CVD growth of thin films, and this is also discussed.     

Surfactant in the gaseous phase II. Influence on stability of foams and thin liquid films

The influence of the vapors ofn-amyl orn-decyl alcohol on the stability of single thin liquid films, single bubbles, and foam columns was determined. It was found that the presence of surfactant vapors lowered the stability of foams and single foam films. The mechanism of the destabilizing action of the surfactant vapors on wet, dynamic foams under dynamic conditions is discussed. It is shown that the destabilizing action of the surfactant vapors is a further indication that surface elasticity forces are the main factor determining stability of wet, dynamic foams.     

Sol-Gel Synthesis of Humidity-Sensitive P2O5-SiO2 Amorphous Films

The sol-gel synthesis of silicophosphate gels using phosphoryl chloride and tetraethoxysilane as molecular precursors is reported and discussed. Gel-derived glasses and films having the molar compositions 10P₂O₅ · 90SiO₂ and 30P₂O₅ · 70SiO₂ have been obtained. The structure of the dried gels as well as the structural modifications that occurs during the transformations in gel-derived glasses are analyzed by Fourier transform infrared spectroscopy (FTIR). It has been found that the evidence of the P—O—Si linkages begins to appear only on the FTIR spectra of the bulk gels heat treated up to 400°C while they are well resolved on the FTIR spectra of the bulk gel samples heated up to 1000°C indicating that at this temperature the transformation in the corresponding gel-derived glasses occurs. The humidity sensitive properties of the gel-films have been evaluated by electrochemical impedance spectroscopy (EIS). The phosphorous content as well as the temperature of the heat treatments strongly affect the sensitivity to RH of the gel-derived films.     

Facile Synthesis of Porous Ag Crystals as SERS Sensor for Detection of Five Methamphetamine Analogs

Porous noble metal nanomaterials have attracted extensive attention due to their high specific surface area and surface plasmon resonance effect. However, it is difficult to form porous structures due to the high mobility and low reduction potential of noble metal precursors. In this article, we developed a facile method for preparing porous Ag with a controllable structure at room temperature. Two kinds of Ag crystals with different porous structures were successfully prepared by using AgCl cubes as sacrificial templates. Through the galvanic replacement reaction of Zn and AgCl, Ag crystals with a sponge-like porous structure were successfully prepared. Additionally, using NaBH₄ as the reducing agent, we prepared granular porous Ag cubes by optimizing the amount of reducing agent. Both the sponge-like and granular porous Ag cubes have clean and accessible surfaces. In addition, we used the prepared two porous Ag cubes as substrate materials for SERS detection of five kinds of methamphetamine analogs. The experimental results show that the enhancement effect of granular porous Ag is better than that of sponge-like porous Ag. Furthermore, we probed the hot spot distribution of granular porous Ag by Raman mapping. By using granular porous Ag as the substrate material, we have achieved trace detection of 5 kinds of methamphetamine analogs including Ephedrine, Amphetamine, N-Methyl-1-(benzofuran-5-yl)propan-2-amine (5-MAPB), N-Methyl-1-(4-methoxyphenyl)propan-2-amine (PMMA) and N-Methyl-1-(4-fluorophenyl)propan-2-amine (4-FMA). Furthermore, to achieve qualitative differentiation of analogs with similar structures we performed density functional theoretical (DFT) calculations on the Raman spectra of the above analogs. The DFT calculations provided the vibrational frequencies, Raman activities, and normal mode assignment for each analog, enabling the qualitative differentiation of the above analogs.     

纳米羟基磷灰石/羧甲基壳聚糖多孔生物复合材料的制备与性能研究

采用化学沉淀法合成了纳米羟基磷灰石粉体(HAP),以无水乙醇为沥滤剂,以16.7%(质量分数)的柠檬酸水溶液作粘结剂,通过粒子沥滤法制备了HAP/CMCS多孔材料,并对其进行了IR、XRD、SEM、孔隙率及抗压强度的测试。结果表明HAP/CMCS复合材料复合前后两组份的化学组成未发生显著变化,但两相间发生了相互作用。多孔材料孔隙率高,孔径分布范围宽,其尺寸分布大约从几微米到600微米,以圆形为主,具有良好的贯通性,非常有利于组织在其中的长入与扩展。当复合材料中CMCS含量为40%,复合材料/造孔剂的质量比为1:1时,多孔材料的孔隙率接近75%,其抗压强度可达21MPa以上,可以满足骨组织工程支架材料的要求。     

Cu3N薄膜及其研究现状

Cu3N薄膜是近10年来研究的热点材料之一.Cu3N是立方反ReO3结构,理想立方反ReO3结构的一个晶胞中Cu原子占据立方边的中心位置而N原子占据立方晶胞的八个顶点,此结构的体心位置有一较大间隙,Cu原子以及其他原子如Pd、碱金属原子等很有可能进入此位置导致Cu3N的电学性能、光学性能等发生很大的变化,这使得该材料具有很大的潜在应用价值.Cu3N的晶格常数为0.3815nm,密度5.84g/cm3,分子量204.63,颜色呈黑绿色或红褐色,空间点群Pm3m.Cu3N薄膜在室温下相当稳定并且热分解温度较低(300℃左右),热分解前后薄膜的光学反射率有较大差别,这可使Cu3N薄膜用作一次性光记录材料.此外,Cu3N薄膜还可用作在Si片上沉积金属Cu线的缓冲层、低磁阻隧道结的阻挡层、自组装材料的模板等.     

工作气压对磁控溅射ITO薄膜性能的影响

工作气压在ITO薄膜的制备过程中是一个重要的工艺参数,直接决定着薄膜的性能.本文利用射频磁控溅射方法,采用氧化铟锡陶瓷靶材,在衬底温度为175℃,工作气压范围为0.45～1.0 Pa条件下,制备了氧化铟锡透明导电薄膜.研究了工作气压对其微观结构、表面形貌和光电特性的影响.在衬底温度为175℃、纯氩气中制备的氧化铟锡薄膜电阻率为3.04 ×10-4 Ω·cm、可见光波段(400～800 nm)透过率为91.9;,适合用作异质结太阳电池的前电极和减反射膜.