Self-bonding in an amorphous polymer below the glass transition: A T-peel test investigation

Films of amorphous polystyrene (PS) with a weight-average molecular weight (M_w) of 225 × 10³ g/mol were bonded in a T-peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (t_h) and healing temperature (T_h). G was found to develop with (t_h)^1/2 at T_h = T_g-bulk − 33 °C (where T_g-bulk is the glass-transition temperature of the bulk sample), and log G was found to develop with 1/T_h at T_g-bulk − 43 °C ≤ T_h ≤ T_g-bulk − 23 °C. The smallest measured value of G = 1.4 J/m² was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<T_g-bulk) was controlled by the diffusion of chain segments feasible above the glass-transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below T_g-bulk. Close values of G = 8–9 J/m² were measured for the symmetric interfaces of polydisperse PS [M_w = 225 × 10³, weight-average molecular weight/number-average molecular weight (M_w/M_n) = 3] and monodisperse PS (M_w = 200 × 10³, M_w/M_n = 1.04) after healing at T_h = T_g-bulk − 33 °C for 24 h. This implies that the self-bonding of high-molecular-weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004     

Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedance spectroscopy

This article presents a new methodology for the quantitative determination of the progress of the curing reaction of a thermosetting resin, using the results of electrical impedance spectroscopy. The method is an extension of the use of the imaginary impedance maximum as a reaction progress indicator and is based on the demonstration of a close correlation between the reaction rate, as measured by conventional differential scanning calorimetry, and the rate of change of the value of the imaginary impedance spectrum maximum. Tests on a commercial aerospace epoxy resin under both isothermal and dynamic heating conditions with calorimetry and impedance spectroscopy have demonstrated the validity of the method and set the accuracy limits involved. This technique can be used as a real-time online control tool for thermoset composite manufacturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 146–154, 2004     

Second-order Nonlinear Optical Properties of a Series of Azulene Derivatives

The first hyperpolarizabilities of a series of novel azulenic-barbituric acid chromophores have been studied by using 12 excitation wavelengths, ranging from 900 to 1907 nm. The dispersion relation of the first hyperpolarizabilities of chromophores holds the same tendency as the experimental results. In addition, the static first hyperpolarizability β0 of molecules was calculated by means of the Sum-Over-States (SOS) expression and the two-level formula respectively. The results show that these molecules possess large static first hyperpolarizabilities and the, β0 value increases as the donor or acceptor strength enhances; the distorted degree of molecules has also an important influence on the β0 value.     

Upper Bounds of the Pursuer Control Based on a Linear-Quadratic Differential Game

Differential game formulations provide an adequate basis for a guidance law synthesis against highly maneuvering targets. This paper deals with a guidance law based on a linear-quadratic differential game formulation. This guidance law has many attractive properties: it is continuous, linear with respect to the state variables, and its gain coefficients can be precalculated offline. Nevertheless, due to the lack of hard control constraints in the formulation, the magnitude of the control can exceed the admissible level imposed by the nature of the problem. In this paper, the upper bound of the interceptor control is obtained depending on the system parameters and the penalty coefficients of the game performance index. It is shown that the interceptor can guarantee an arbitrarily small miss distance without exceeding the control constraints if it has sufficient maneuverability and if the penalty coefficients are chosen properly. By manipulating the penalty coefficients, it is possible to reduce significantly the maneuverability requirements compared to the case of zero interceptor penalty coefficient.     

Dynamic Strategic Pricing and Speed of Diffusion

Defining speed of diffusion as the amount of time it takes to get from one penetration level to a higher one, we introduce a dynamic model in which we study the link between pricing policy, speed of diffusion, and number of competitors in the market. Our analysis shows that, in the case of strategic (oligopolistic) competition, the speed of diffusion has an important influence on the optimal pricing policy. In particular, we find that higher speeds of diffusion create an incentive to strategically interacting firms to lower their prices.     

The canonical solution operator of $ {\bar \partial } $ on weighted spaces with holomorphic coefficients

On weighted spaces with strictly plurisubharmonic weightfunctions the canonical solution operator of and the ‐Neumann operator are bounded. In this paper we find a class of strictly plurisubharmonic weightfunctions with certain growth conditions, so that they are Hilbert‐Schmidt operators between weighted spaces with different weightfunctions, if they are restricted to forms with holomorphic coefficients. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Harnack inequality for some classes of Markov processes

In this paper we establish a Harnack inequality for nonnegative harmonic functions of some classes of Markov processes with jumps. Mathematics Subject Classification (2000): Primary 60J45, 60J75, Secondary 60J25.This work was completed while the authors were in the Research in Pairs program at the Mathematisches Forschungsinstitut Oberwolfach. We thank the Institute for the hospitality.The research of this author is supported in part by NSF Grant DMS-9803240.The research of this author is supported in part by MZT grant 0037107 of the Republic of Croatia.     

Explicit 2-Factorisations of the Odd Graph

In this note we show how 1-factors in the middle two layers of the discrete cube can be used to construct 2-factors in the Odd graph (the Kneser graph of (k − 1)-sets from a (2k − 1)-set). In particular, we use the lexical matchings of Kierstead and Trotter, and the modular matchings of Duffus, Kierstead and Snevily, to give explicit constructions of two different 2-factorisations of the Odd graph. This revised version was published online in September 2006 with corrections to the Cover Date.     

Hydromagnetic rotating flow of a fourth‐order fluid past a porous plate

The rotating flow in the presence of a magnetic field is a problem belonging to hydromagnetics and deserves to be more widely studied than it has been to date. In the non‐linear regime the literature is scarce. We develop the governing equations for the unsteady hydromagnetic rotating flow of a fourth‐order fluid past a porous plate. The steady flow is governed by a boundary value problem in which the order of differential equations is more than the number of available boundary conditions. It is shown that by augmenting the boundary conditions based on asymptotic structures at infinity it is possible to obtain numerical solutions of the nonlinear hydromagnetic equations. Effects of uniform suction or blowing past the porous plate, exerted magnetic field and rotation on the flow phenomena, especially on the boundary layer structure near the plate, are numerically analysed and discussed. The flow behaviours of the Newtonian fluid and second‐, third‐ and fourth‐order non‐Newtonian fluids are compared for the special flow problem, respectively. Copyright © 2004 John Wiley & Sons, Ltd.