Solution Behavior of Poly(n-Isopropylacrylamide) in Water: Effect of Additives

The effect of different kinds of additives (electrolytes, nonelectrolytes, hydrotropes, and surfactants) on the cloud point (CP) of low molecular weight and narrow dispersed poly(n-isopropylacrylamide) (PNIPAM) synthesized via reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization was examined. The CP showed a concentration dependent variation and it is greatly modified in the presence of additives. The size of the random polymer coil at 30°C obtained from dynamic light scattering (DLS) measurements is often influenced by the presence of additives. We have explained the effects of different additives on PNIPAM in terms of their interaction with polymer and resultant changes in the coil structure.     

Novel Sulfanilamide as Potent Surfactants and Antibacterial Agents

Sulfanilamide derivatives of the type RØSO₂NHR in which substitution at both the amino and amido nitrogen have been synthesized where R = NHCOCH:CHCOOH, NHCOCH₂CH₂COOH, NHCH₂CH(OH)CH₂SO₃Na, N⁺(CH₃)₃I^? and NHCH₂CH(OH)CH₂N⁺(C₂H₅)₃Cl^? and R′ = butyl, cyclohexyl, and decyl. The unique structural features of these sulfanilamides were confirmed by infrared, proton magnetic resonance and elemental analysis. Most of these compounds exhibited good water solubility and surface activity. Wetting ability and tendency of enhancing oil/water emulsification were related to the structure of the substituents in sulfanilamide molecule. Furthermore, the peculiar of molecular structure of these sulfanilamide surfactants imparts distinguished antimicrobial activity to these molecular species against some Gram positive and Gram negative bacteria.     

稻草与煤固定床共热解特性的研究

选取稻草为生物质原料,将其与两种不同煤阶的煤(内蒙褐煤和神府烟煤)分别以0∶100、20∶80、40∶60、60∶40、80∶20、100∶0的干基质量比均匀混合.借助固定床反应器,研究了稻草与两种煤的共热解特性,探讨了共热解过程中可能存在的协同作用.结果表明,稻草添加有利于共热解气体产物的生成,且对神府煤作用更明显;稻草含量越高,热解气体产量的实验值与加权平均计算值的偏差也越大,说明稻草与煤共热解过程发生了协同作用.而共热解所得焦产量的实验值与加权平均计算值基本一致.热解焦傅里叶红外光谱分析结果表明,稻草添加对热解焦的官能团未造成显著影响.     

Cloud point extraction for the determination of cadmium and lead employing sequential multi-element flame atomic absorption spectrometry

A cloud point extraction procedure for pre-concentration and determination of cadmium and lead in drinking water using sequential multi-element flame atomic absorption spectrometry is described. 4-(2-thiazolylazo)-orcinol (TAO) has been used as complexing agent and the micellar phase was obtained using the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114) and centrifugation. The conditions for reaction and extraction (surfactant concentration, reagent concentration, effect of incubation time, etc) were studied and the analytical characteristics of the method were determined. The method allows the determination of cadmium and lead with quantification limits of 0.30?µg?L^?1 and 2.6?µg?L^?1, respectively. A precision expressed as relative standard deviation (RSD, n?=?10) of 2.3% and 2.6% has been obtained for cadmium concentrations of 10?µg?L^?1 and 30?µg?L^?1, respectively, and RSD of 1.3% and 1.7% for lead concentrations of 10?µg?L^?1 and 30?µg?L^?1, respectively. The accuracy was confirmed by analysis of a natural water certified reference material. The method has been applied for the determination of cadmium and lead in drinking water samples collected in the cities of Ilhéus and Itabuna, Brazil. Recovery tests have also been performed for some samples, and results varied from 96 to 105% for cadmium and 97 to 106% for lead. The cadmium and lead concentrations found in these samples were always lower than the permissible maximum levels stipulated by World Health Organization and the Brazilian Government.     

Cloud point extraction of aluminum (III) in water samples and determination by electrothermal atomic absorption spectrometry,flame atomic absorption spectrometry and UV-visible spectrophotometry

Cloud point extraction was applied as a preconcentration step for the determination of trace level of Al(III) in water samples with electrothermal atomic absorption spectrometry (ETAAS), flame atomic absorption spectrometry (FAAS) and UV-visible spectrophotometry. The aluminum was extracted as aluminum-Eriochrome Cyanine R (ECR) complex, at pH 6 by micelles of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The investigations showed that the same CPE procedure can be used for different detection techniques. The results obtained from these techniques were evaluated. Under the optimal conditions, limit of detection obtained with ETAAS, FAAS and UV-visible spectrophotometry were 0.03 ng mL^?1, 0.06 µg mL^?1 and 0.01 µg mL^?1, respectively. The accuracy of the procedure was tested by analysing certified reference material. The method was successfully applied to determination of aluminum in water samples and dialysis fluid.     

An evaluation of antifouling booster biocides in Gran Canaria coastal waters using SPE-LC MS/MS

A solid phase extraction (SPE) technique for seawater samples coupled to quantification using liquid chromatography tandem-mass spectrometry (LC-MS/MS) is described to quantify relevant antifouling booster biocides of ecotoxicological concern (Diuron, TCMTB, Irgarol 1051 and Dichlofluanid). The optimised methodology provides a sensitive, easy to use and efficient analytical procedure with detection limits in the range of between 0.1 and 0.2?ng?L^?1 and appropriate reproducibility (with analytical standard deviations of less than 10%). Spiked recoveries for all compounds exceeded 72%. The method was tested through a thorough monitoring regime of commercial port and marinas on the island of Gran Canaria (off the north-west coast of Africa) over a period of several months in 2008. Results provide the first data for antifouling booster biocides in the Canary Islands. Concentrations of Diuron and Irgarol 1051 in samples ranged between 2 and 195?ng?L^?1 and 2 and 146?ng?L^?1, respectively. TCMTB and Dichlofluanid were not detected.     

Enthalpy–Entropy Compensation Combined with Cohesive Free‐Energy Densities for Tuning the Melting Temperatures of Cyanobiphenyl Derivatives

This work illustrates how minor structural perturbations produced by methylation of 4′‐(dodecyloxy)‐4‐cyanobiphenyl leads to enthalpy–entropy compensation for their melting processes, a trend which can be analyzed within the frame of a simple intermolecular cohesive model. The transformation of the melting thermodynamic parameters collected at variable temperatures into cohesive free‐energy densities expressed at a common reference temperature results in a novel linear correlation, from which melting temperatures can be simply predicted from molecular volumes.     

A uniqueness theorem of radially symmetric positive stationary solutions for a competition–diffusion system

In this paper, as a first step to study the global structure of solution, we treat a class of reaction–diffusion systems with competitive interaction, and discuss a uniqueness theorem of radially symmetric solutions for the system. To do this, the comparison principle and the shooting method are employed, and the spatial profile is investigated.