MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

Basicity and structure of 5-hydroxybenzimidazoles in nitromethane

Examination of the acid-base properties of 5-hydroxybenzimidazoles has shown them to exist in nitromethane as the 5-hydroxy-tautomers. Substituents in the 2-position have a predominantly inductive effect on the basicity of the 3-nitrogen, rationalized as in other nitrogen heterocycles by the proximity of the substituents to the reaction center.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. The Research Institute for Intermediates and Dyes, 103787 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 421–425, February, 1992.     

固相热分解反应最可几机制的判断

固相热分解反应最可几机制的判断高永煜，邹文樵，冯仰婕（华东理工大学化学系上海２００２３７）关键词热分解，动力学方程，反应机制固相热分解反应机制的判断，是热分析动力学中令人感兴趣的领域。常用的方法是从含机制函数的非等温积分动力学方程出发，分别用Ｓｅｓｔ...     

Thermodynamics of the conversion of aqueous glucose to fructose

The thermodynamics of the conversion of aqueous glucose to fructose has been investigated using both heat conduction microcalorimetry and high pressure liquid chromatography (HPLC). The reaction was carried out in both aqueous Tris/HCl buffer and in aqueous phosphate buffer in the pH range 7–8 using the enzyme glucose isomerase and the cofactors CoCl₂ and MgSO₄. The temperature range over which this reaction was investigated was 298.15–358.15 K. We have found that the enthalpy of reaction is independent of pH over the range investigated. A combined analysis of both the HPLC and microcalorimetric data leads to the following results at 298 15 K:ΔG° = 349 ± 53 J mol^-1, ΔH° = 2.78 ± 0.20 kJ mol^-1, and ΔC _p ^° = 76 ± 30 J mol^-1 K^-1. The stated uncertainties are based upon an analysis of both the random and systematic errors inherent in the measurements. Comparisons are made with literature data. The percent conversion of glucose to fructose has been calculated for the temperature range 300–373.15 K.     

A new stereoselective synthesis of 2-amino-4,5-dihydrothiophene-3-carbonitrile derivatives

A new stereoselective method for the synthesis of trans-isomers of 2-amino-4-aryl-5-benzoyl-4,5-dihydrothiophene-3-carbonitriles was proposed. The method involves base-catalyzed reactions of phenacyl thiocyanate with 3-(het)aryl-2-cyanoprop-2-enethioamides. (4R,5S/4S,5R)-2-Amino-5-benzoyl-4-(2-chlorophenyl)-4,5-ihydrothiophene-3-carbonitrile was structurally characterized by X-ray diffraction analysis. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1379–1383, July, 2007.     

甲烷氧化偶联Na2WO4-Mn/SiO2催化剂热效应的研究

采用固定床微型反应装置,研究了甲烷氧化偶联反应过程中Na2WO4-Mn/S iO2催化剂床层的热效应和催化性能的关系,考察了反应炉温、CH4/O2比和反应气体空速对催化剂床层热点分布的影响.研究结果表明,甲烷氧化偶联催化剂床层的热效应强烈依赖于反应条件.反应炉温越高,CH4/O2比越低,反应气体空速越大,催化剂床层的热点温度越高.结合催化性能和热效应关系的研究,为优化甲烷氧化偶联的反应操作提供了实验依据.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Counterpoise-corrected potential energy surfaces of simple H-bonded systems

Geometries and stabilization energies of various simple H-bonded complexes (water dimer, hydrogen fluoride dimer, formamide dimer, formic acid dimer) have been determined by a gradient optimization that eliminates the basis set superposition error (BSSE) by the counterpoise (CP) method in each gradient cycle as well as by the standard gradient optimization. Both optimization methods lead to different potential energy surfaces (PES). The difference depends on the theoretical level used and is larger if correlation energy is considered. Intermolecular distances from the CP-corrected PES are consistently longer, and this difference might be significant (∼0.1 ?); also angular characteristics determined from both surfaces differ significantly. Different geometries were obtained even when passing to larger basis sets (aug-cc-pVDZ). The standard optimization procedure can result in a completely wrong structure. For example, the “quasi-linear” structure of the (HF)₂ (global minimum) does not exist at the standard MP2/ 6-31G** PES (where only cyclic structure was detected) and is found only at the CP-corrected PES. Stabilization energies obtained from the CP-corrected PES are always larger than these from the standard PES where the BSSE is added only a posteriori for the final optimized structure; both energies converge only when passing to a larger basis set (aug-cc-pVDZ). Received: 11 March 1998 / Accepted: 19 June 1998 / Published online: 4 September 1998 RID=" ID=" <E6>Acknowledgements.</E6> The project was supported by the Grant Agency of the Czech Republic (Grant No. 203/98/1166). RID=" ID=" <E5>Correspondence to</E5>: P. Hobza     

On the ab initio evaluation of the solvent shift of electronic absorption spectra

Solvent shift in water of π → π^* transitions of the carbonyl group is evaluated making use of a recently proposed computdtional procedure for the continuum solvent model. Comparisons with the discrete model and with composite discrete-continuum procedures are performed.     

Three-component catalytic method for synthesis of α-amino phosphonates with the use of α-amino acids as amine component

Interaction of aliphatic and aromatic aldehydes and ketones with optically active L-α-amino acids or their esters in the three-component catalytic one-pot synthesis of α-aminophosphonates was studied. The corresponding α-amino phosphonates are formed in high yields as mixtures of diastereomers. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 768–774, April, 2007.