Experimental investigations of the functional morphology of dragonfly wings

Nowadays, the importance of identifying the flight mechanisms of the dragonfly, as an inspiration for designing flapping wing vehicles, is well known. An experimental approach to understanding the complexities of insect wings as organs of flight could provide significant outcomes for design purposes. In this paper, a comprehensive investigation is carried out on the morphological and microstructural features of dragonfly wings. Scanning electron microscopy （SEM） and tensile testing are used to experimentally verify the functional roles of different parts of the wings. A number of SEM images of the elements of the wings, such as the nodus, leading edge, trailing edge, and vein sections, which play dominant roles in strengthening the whole structure, are presented. The results from the tensile tests indicate that the nodus might be the critical region of the wing that is subjected to high tensile stresses. Considering the patterns of the longitudinal corrugations of the wings obtained in this paper, it can be supposed that they increase the load-bearing capacity, giving the wings an ability to tolerate dynamic loading conditions. In addition, it is suggested that the longitudinal veins, along with the leading and trailing edges, are structural mechanisms that further improve fatigue resistance by providing higher fracture toughness, preventing crack propagation, and allowing the wings to sustain a significant amount of damage without loss of strength.     

Optical testing of star sensor (II): Alignment of star sensor from off-line pictures taken in orbital test

Alignment error of an image sensor relative to the optical axis of a star sensor head and alignment errors between four heads were calculated from pictures taken in an orbital experiment. When comparing the image sensor alignment parameters in the orbital test and a ground test, both values matched well. By determining the relative relationship of the four heads using four pictures taken at the same moment in orbit and uploading the parameters to the star sensor system in orbit, the estimated attitude error was improved from 0.29 to 0.17°, though the accuracy was limited by the ±0.2° determination accuracy of the satellite itself. We estimated the attitude determination accuracy from separation angles between boresights of the four heads, calculated from pattern matching between downloaded pictures and a star catalogue. The estimated accuracy, in terms of potential optical performance, was 0.60 arcmin at 3σ, which is sufficient to satisfy the specification of 1 arcmin.     

国内首次超导高频系统束流调试及高功率试验

2004—2007年BEPC高频系统从常温腔改建到超导腔, 逐渐解决了改频的物理问题和超导技术的工程难题, 实现了与国际先进技术接轨, 并按期保质完成了工程、调束任务. 高频系统是BEPCⅡ工程首个吸收国外超导技术、自主完成集成和调试成功的大型装置; 2006年7月国内首次超导高频大功率试验成功; 2006年11月完成系统联调, 按期投入BEPCⅡ首轮调束; 同年12月首次投入同步辐射运行; 2007年2至5月, 东、西两套超导高频系统在1MV以上的加速电压均已实现正/负电子1.89GeV注入积累和110/114mA对撞; 在同步辐射运行中, 逐渐达到2.5GeV/250mA、束流功率100kW, 接近国外同类机器水平; 束流试验证明两套高频系统的     

基于USB的卫星通用化地面测试软件的设计

本文将软件工程中的组件技术引入卫星测试领域,提出了利用测试功能组件构建通用化测试软件的设计思路。首先,对现有卫星型号的地面测试任务做共性研究;其次,总结通用化测试软件的研制需求;然后,进行软件概要设计和详细设计;最后,软件实现。经验证,本文提出的基于USB接口的卫星通用化地面测试软件,通用性强,能较好的满足多个分系统单机设备的测试要求。     

The effect of resistant starches on fat oxidation in healthy adults as measured by a 13CO2-breath test

A resistant starch (RS) mixture (MIX) consisting of fibre of potatoes (FP) and wrinkled pea starch (WPS), and high amylose maize starch (HAMS) were supplemented in adults to evaluate their effects on fat oxidation by means of a ¹³CO₂-breath test. Sixteen subjects received a regular diet either without or with the supplementation of MIX and HAMS in randomised order. After administration of a [U-¹³C]algal lipid mixture, exhaled air was collected over 14?h in 0.5- and 1-h intervals. The ¹³C abundances were measured by nondispersive infrared spectroscopy. In comparison to the dry run (DR), supplementation with MIX and with HAMS increased the cumulative percentage dose recovery: (DR: 16.7?%, MIX: 16.9?%, HAMS: 18.0?%), but without statistical significance. The colonic degradation of MIX and HAMS to short-chain fatty acids tends to lower the formation of carbohydrate-derived acetyl-CoA and contributes to a postprandial lipid oxidation increase by using fat-derived acetyl-CoA as a compensatory fuel source.     

Exact Solution of a Test Particle in Presence of Thick Domain Walls

We have obtained the exact solution of the equations of motion of a test particle near a thick domain walls. From the solution it has been shown that the domain walls have repulsive gravitational fields.     

大型试件的X射线CT检测方法探讨

当对投影长度大于探测器长度的大型试件做平行光束CT时 ,可以认为投影被截断了。从数学上讲 ,这种情况下的解析法重建如滤波反投影法是不适宜的。然而从工程应用上来说 ,这又不是绝对的。就几种情况讨论了通过补充假数据 ,通过在 0～ 2π范围内对试件成像得到了完整的CT切片 ,获得了切片的精确重建     

微带型光导开关的电压转换效率

采用微带测试电路对光导开关电压转换效率进行了测试。依据传输线理论,考虑微带传输电路的端点反射,计算给出了光导开关导通电阻不为0的情况下,微带测试电路电压转换效率的解析结果。计算表明：对窄脉宽的线性电脉冲输出,电压转换效率将小于50%;对lock-on模式下的宽脉冲输出,电压转换效率可以超过50%,在理想情况下达到100%;在临界状态下,形成双峰电脉冲输出。结果表明,存在端点反射且光导开关产生电脉冲脉宽达到一定值时,微带线可以起到倍压传输线的作用。     

Dynamical Analysis of a New Chaotic Fractional Discrete-Time System and Its Control

This article proposes a new fractional-order discrete-time chaotic system, without equilibria, included two quadratic nonlinearities terms. The dynamics of this system were experimentally investigated via bifurcation diagrams and largest Lyapunov exponent. Besides, some chaotic tests such as the 0–1 test and approximate entropy (ApEn) were included to detect the performance of our numerical results. Furthermore, a valid control method of stabilization is introduced to regulate the proposed system in such a way as to force all its states to adaptively tend toward the equilibrium point at zero. All theoretical findings in this work have been verified numerically using MATLAB software package.     

高次非球面的工艺技术研究

 高次非球面在光学系统应用中意义重大,但是一直以来缺乏一套快速、有效的工艺方法。利用VC6.0编制了一款面型计算软件以辅助加工,并提出了一种新的高次非球面补偿检验方法。针对一块巡天光谱仪中口径Φ244 mm的一面平面另一面为高次非球面的改正镜开展工艺方法的设计与研究,从铣磨成形开始,根据高次非球面的特点提出了几种新型磨削工艺,建立相应的数学模型。由于高次非球面的特殊性,试验了数控铣磨直接成型法,很大程度上降低后继工艺难度,在细磨和抛光阶段采用数控小工具和整工具研磨相结合,能够很好地克服面型不平滑等技术难题。总结出了一套高效率、低成本、高精度的高次非球面工艺方法。