Coupled-column liquid chromatography method with photochemically induced derivatization for the direct determination of benzoylureas in vegetables

The coupled-column (LC-LC) system, consisting of a first column packed with internal surface reversed phase (ISRP) (50 x 4.6mm ID) and a Chrompack C18 (100 x 4.6 mm ID) as second column, allowed the simultaneous determination of five benzoylurea insecticides in dichloromethane (CH2Cl2) extracts of vegetable samples without any clean-up step. This system was combined with a photochemically induced fluorescence (PIF) post-column derivatization in order to provide strongly fluorescent photoproducts from the non-fluorescent benzoylureas. Limits of detection ranged from 0.21 to 0.98 microg L(-1) of pesticide (equivalent to 0.14-0.65 microg kg(-1) in vegetable samples) and limits of determination ranged from 4.0 to 10.0 microg L(-1) (equivalent to 2.7-6.7 microg kg(-1)). Linearity of the method was established between 2 and 1800 microg L(-1), depending upon the compound. Validation of the total method was performed by randomly analyzing recoveries of four vegetable samples (aubergine, cucumber, green bean, and tomato) spiked at two levels of concentration (10.0 and 33.3 microg kg(-1)). The combination of the LC-LC system with PIF detection provides a sensitive, selective, and rapid method for the determination of pesticides in vegetable samples at levels lower than the maximum residue levels (MRLs) established for these compounds by Spanish legislation.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Effective atom volumes for implicit solvent models: comparison between Voronoi volumes and minimum fluctuation volumes

An essential element of implicit solvent models, such as the generalized Born method, is a knowledge of the volume associated with the individual atoms of the solute. Two approaches for determining atomic volumes for the generalized Born model are described; one is based on Voronoi polyhedra and the other, on minimizing the fluctuations in the overall volume of the solute. Volumes to be used with various parameter sets for protein and nucleic acids in the CHARMM force field are determined from a large set of known structures. The volumes resulting from the two different approaches are compared with respect to various parameters, including the size and solvent accessibility of the structures from which they are determined. The question of whether to include hydrogens in the atomic representation of the solute volume is examined. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1857-1879, 2001     

The Employ of Multiple Voltammetric Pulses for the Study of the Adsorption of Bipyridilium Pesticides in River Sediment

The multiple square‐wave voltammetry (MSWV) allied to gold microelectrode (Au‐ME) was used to establish an electroanalytical procedure for the determination of the paraquat and diquat pesticides in river sediment samples. For both pesticides, two reduction peaks, at around ?0.70 V (peak 1) and around ?1.00 V vs. Ag/AgCl 3.00 mol L^?1 (peak 2), with profile of the totally reversible redox process, were observed. The experimental and voltammetric conditions showed that the best conditions to reduce paraquat and diquat were a pH of 6.0, a frequency of 250 s^?1, a scan increment 2 mV, a square‐wave amplitude of 50 mV and pulse number of 8 pulses of potential in each step of staircase of potential. Under such conditions, the detection limit of 0.044 μg L^?1 (0.044 ppb) and 0.360 μg L^?1 (0.360 ppb ) for peak 1 and peak 2 of paraquat and 0.159 μg L^?1 (0.159 ppb) and 0.533 μg L^?1 (0.533 ppb) for peak 1 and peak 2 of diquat, respectively, were obtained. These results are an order of magnitude of about two less than those obtained and published in the literature. Also, the electroanalytical procedure proposed was applied for the determination of adsorption isotherms of pesticides on river sediments samples collected from Mogi‐Guaçu River in Sao Paulo State, Brazil. The experimental data were fitted using the Langmuir and Freundlich isotherms models; and the results indicated low intensities of adsorption process of the pesticides in the samples employed with distribution coefficients (K_d) lower 5.0, and paraquat showed slightly higher affinity than diquat in the sediments. The increase in organic matter and organic carbon leads to an increase in the K_d values, and consequently an increase in the organic matter constant (K_OM) organic carbon constant (K_OC) values. All results demonstrated that isotherms “L” type in the Giles classification were obtained, indicating that sediments have a medium affinity for the pesticides, and no strong competition from the solvent used (in this case Na₂SO₄) for adsorption sites occurs.     

Evidence of a phase transition of RbHCO3 from high-resolution solid-state 13C and 87Rb NMR by comparison with KHCO3

A variable-temperature high-resolution 13C and 87Rb solid-state NMR study of powder rubidium hydrogencarbonate, RbHCO3, is presented for the first time. At ambient temperature, RbHCO3 is formed by centrosymmetric dimers linked by hydrogen bonds, but almost no information is available on this compound concerning proton disorder and the low-temperature phase. However, potassium hydrogencarbonate, KHCO3, which has an isomorphic structure for the high temperature phase, was well studied: it undergoes a non-ferroic, non-ferroelectric phase transition at Tc = 318 K between two monoclinic structures. The protons are disordered in an asymmetric double-well potential in the low-temperature phase, and the double-well potential becomes symmetric in the high-temperature phase. By comparison with recent solid-state NMR experimental results on KHCO3, we show that RbHCO3 undergoes a phase transition at Tc approximately 245 K, and give evidence that the proton dynamic disorder in both compounds is very similar.     

Dynamic ultrasound-assisted extraction of polyphenols in tobacco

A novel extraction method, namely dynamic ultrasound-assisted extraction, is investigated. This technique is efficient with respect to both time and solvent consumption because it utilizes ultrasonic energy in dynamic mode during extraction. Polyphenols (chlorogenic acid, esculetin, rutin, scopoletin, and quercitrin) are extracted from a tobacco (Nicotina tobaccum L.) sample for 10 min with 6 mL of solvent. Fresh solvent is continuously pumped through the sample, with which the analytes can be rapidly extracted, and the possibility of degradation efficiently avoided. Methanol involving 0.5% w/v ascorbic acid was used as extraction solvent; optimal flow rate and extraction time were investigated. The extract was cleaned up by C18 disposable cartridge. The spiked and nonspiked tobacco samples were used for the evaluation of the proposed method. Recoveries obtained were varied from 96 to 108% and RSDs from 2.0 to 4.6%. This extraction technique was revealed to recover larger amounts of polyphenols from tobacco, compared to the static ultrasound-assisted extraction method.     

19F and 1H NMR spectra of halocarbons

19F NMR chemical shifts and coupling constants are reported for 215 compounds. For 77 of these compounds, 1H NMR spectral data are also given. Long-range couplings, including 8J(F,F) and 5J(F,H), are reported. The complexity of halocarbon spectra owing to the presence of rotational isomers, asymmetric centers, long-range couplings, and chlorine isotope effects are illustrated, and the methods used for analyzing such complex spectra are briefly discussed.     

Nucleophilic Addition of Thiaproline to Electrochemically Derived o‐Quinone,Application to the Sensitive Voltammetric Detection of Thiaproline

The mechanism of electrochemical behavior of catechol in the presence of thiaproline is investigated by cyclic voltammetry, controlled‐potential coulometry and spectrophotometric tracing of the reaction coordinate. The results indicate that thiaproline participate in with an ECEC mechanism in a nucleophilic (Michael) addition to o‐quinone. Effect of pH of buffer solution on reaction pathway is studied and showed that addition of thiaproline to the o‐quinone is performed only in solutions with pHs higher than 5. These results indicate that the addition of thiaproline is occurred first from amine functional group. In the second step, the addition of carboxylate group of thiaproline to C‐5 of catechol results the final product with a lactone ring in its structure. Observation of two isosbestic point in absorption spectrum during the progress of the electrolysis together with the FT‐IR results for final product can be presented as evidence for two step addition of thiaproline to catechol. Final product, due to the electron donor property of thiaproline, more easily oxidized respect to the former catechol and as a result, a new redox couple is obtained for this compound in lower potentials. The easier anodic oxidation of addition product (relative to catechol) caused to an increase in anodic current for catechol, which is proportional to the thiaproline concentration. The differential pulse voltammetry (DPV) is applied as a sensitive voltammetric method for the detection of thiaproline. A linear range from 5×10^?8 to 5×10^?6 M with a detection limit of 1×10^?8 M is resulted for thiaproline. With respect to the reversibility of the electrochemical reactions in the mechanism, and also more facile oxidation of the addition products, the square‐wave voltammetry is presented as a method with considerably more sensitivity for the detection of sub‐micromolar amounts of thiaproline. The advantageous properties of the voltammetric method for thiaproline detection lie in its excellent catalytic activity, sensitivity and simplicity.     

Exact rotamer optimization for protein design

Computational methods play a central role in the rational design of novel proteins. The present work describes a new hybrid exact rotamer optimization (HERO) method that builds on previous dead-end elimination algorithms to yield dramatic performance enhancements. Measured on experimentally validated physical models, these improvements make it possible to perform previously intractable designs of entire protein core, surface, or boundary regions. Computational demonstrations include a full core design of the variable domains of the light and heavy chains of catalytic antibody 48G7 FAB with 74 residues and 10(128) conformations, a full core/boundary design of the beta1 domain of protein G with 25 residues and 10(53) conformations, and a full surface design of the beta1 domain of protein G with 27 residues and 10(60) conformations. In addition, a full sequence design of the beta1 domain of protein G is used to demonstrate the strong dependence of algorithm performance on the exact form of the potential function and the fidelity of the rotamer library. These results emphasize that search algorithm performance for protein design can only be meaningfully evaluated on physical models that have been subjected to experimental scrutiny. The new algorithm greatly facilitates ongoing efforts to engineer increasingly complex protein features.     

Sensitivity in Supramolecular Architectures of Polyaromatic Salts Containing Two Singly‐Pimerized Bipyridines

Three novel supramolecular arrays of zigzag polyaromatic salts are reported. Both the conformation and disposition of the dications are subjected to various noncovalent interactions. Thus, the presence or absence of the π‐π interacting enclathrated molecules, the efficient packing and the involved hydrogen bonding interactions of anions, as well as the increased hydrophobic property of the dications themselves exert influence.