The Enhancement of Efficiency of High-order Harmonic in Intense Laser Field Based on Asymptotic Boundary Conditions and Symplectic Algorithm

Asymptotic boundary condition (ABC) of laser-atom interaction presented recently is applied to transform the initial value problem of the time-dependent Schrödinger equation (TDSE) in infinite space into the initial and boundary value problem in the finite space, and then the TDSE is discretized into linear canonical equations by substituting the symmetry difference quotient for the 2-order partial derivative. The canonical equation is solved by symplectic algorithm. The ground state and the equal weight coherent superposition of the ground state and the first excited state have been taken as the initial conditions, respectively, while we calculate the population of bound states, the evolution of average distance and the high-order harmonic generation (HHG). The conversion efficiency of HHG can be enhanced by initial coherent superposition state and moderate laser intensities     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Separation of organoselenium compounds and their electrochemical detection

A simplified procedure based on ion-exchange separation of selenourea (Se-U) and selenocystamine (Se-CM), which have very close half-wave potential when they are simultaneously analyzed by voltammetric techniques, has been developed and optimized. Thus, selenocystamine remains in the cation exchanger Purolite C 100 H, whereas selenourea is found in the effluent and is determined by square wave cathodic stripping voltammetry using Na₂CO₃ as electrolyte. Selenocystamine is then eluted from the cation exchanger using 4 M HCl and analyzed by square wave cathodic stripping voltammetry in the HCl solution. For each voltammetric determination the corresponding parameters were investigated and optimized; the obtained detection limits were 0.3 ng Se mL^–1 for Se-CM and 2 ng Se mL^–1 for Se-U. A flow sheet for the separation of inorganic (Se(IV) and Se(VI)) and organoselenium compounds (Se-U, Se-CM, (CH₃)₂Se₂, and (CH₃)₂Se) developed for their electrochemical detection is presented and it was successfully applied to a certified reference material, an environmental soil sample, and a urine sample.     

Basis Set Orbital Relaxation in Atomic and Molecular Hydrogen Systems

Orbital relaxation (OR) amounts to variation of the orbital exponents in hydrogen molecules and ions relative to the exponents of the isolated atom; it is represented as the sum of the one- and two-center contributions depending on the effective atomic charge and on the presence of other atoms in the molecule. The procedure for isolating the contributions of the exponent includes treatment of the OR of hydrogen in a special set of neutral and charged atoms and molecules with certain multiplicities of their electronic states. Within the framework of the spin-unrestricted Hartree-Fock method, we found and discussed the optimal values of the exponents of the basis orbitals of hydrogen atoms and molecules using the minimal split valence-shell basis set, the basis set that includes the polarization function, and the expanded set of grouped natural orbitals. A simple energy model is suggested for OR. Expressions are derived for evaluating the exponents of the relaxed orbitals in hydrogen-containing systems.Original Russian Text Copyright © 2004 by A. I. Ermakov, A. E. Merkulov, A. A. Svechnikova, and V. V. Belousov__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 6, pp. 973–978, November–December, 2004.     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.     

Quantitative volatilization of tin as mixed halides and its application in metal analysis

Proposed in this paper is an improved method for removal of tin as the matrix element by volatilization in an anhydrous medium as mixed halides of different composition. Any one of them boils at a lower temperature than SnBr₄. This ternary system enhances the eventual recombination of temporarily dissociated species to volatile ones, thus making the process quicker and more efficient. The presence of 2 mg of Pb(II) suffices to prevent Bi(III) from loss due to volatilization.     

Direct high-performance liquid chromatographic method for enantioselective and diastereoselective determination of selected pyrethroic acids

This study reports on the direct HPLC stereoisomer separation of selected pyrethroic acids employing commercial cinchona alkaloid derived chiral stationary phases (CSPs). cis/trans-Chrysanthemic acid (cis/trans-CA), cis/trans-chrysanthemum dicarboxylic acid (cis/trans-CDCA), cis/trans-permethrinic acid (cis/trans-PA), and fenvaleric acid (FA) were resolved into the individual stereoisomers, i.e. enantiomers and diastereomers as well. To achieve satisfactory baseline separation an optimisation of the variables of the chromatographic method including chemical structure of the cinchona carbamate CSP, mobile phase composition, and flow rate was required. All four stereoisomers of PA were successfully separated in a single run (alphacis = 1.20, alphatrans = 1.26, critical Rs = 1.65) with an acetonitrile (ACN)-based polar-organic eluent. The complete baseline resolution of all CA stereoisomers succeeded in polar-organic (alphacis = 1.20, alphatrans = 1.35, critical Rs = 3.03) as well as in acetonitrile-based reversed-phase media (alphacis = 1.24, alphatrans = 1.22, critical Rs = 2.73). The latter elution mode was also found to be suitable for the enantio- as well as diastereoselective resolution of CDCA (alphacis = 1.09, alphatrans = 1.50, critical Rs = 1.43), which is to the best of our knowledge the first reported enantiomer separation of this analyte. The enantiomers of FA could be baseline separated employing also reversed-phase mode (alpha = 1.16, Rs = 2.91). These separation methods may be applied for quality control processes in the production of stereoisomerically pure insecticides as well as stereoselective toxicokinetic studies, as CDCA, PA, and FA are suitable biomarkers for monitoring human pyrethroid burden.     

Dehydration of tetrafluoropropanol (TFP) by pervaporation via novel PBI/BTDA-TDI/MDI co-polyimide (P84) dual-layer hollow fiber membranes

A novel PBI/P84 co-polyimide dual-layer hollow fiber membrane has been specifically fabricated through the dry-jet wet phase inversion process, for the first time, for the dehydration pervaporation of tetrafluoropropanol (TFP). Polybenzimidazole (PBI) was chosen as the outer selective layer because of its superior hydrophilic nature and excellent solvent-resistance together with robust thermal stability, while P84 co-polyimide was employed as the inner supporting layer because of its good solvent-resistance and thermal stability. The PBI/P84 membrane exhibits superior water selectivity and relatively high permeation flux. At 60 °C, the PBI/P84 dual-layer hollow fiber membrane shows a permeation flux of 332 g/(m² h) and a separation factor of 1990 for a feed solution containing of 85 wt% TFP. The preferential water sorption and the significant diffusivity difference between TFP and water are the main causes of high separation factor. However, an increase in feed temperature will greatly increase the permeation flux but seriously decrease the water selectivity. The activation energy data verify that water can preferentially permeate the PBI membrane due to the strong water affinity of PBI and a much smaller molecular size of water.     

Conditions to Control Furan Ring Opening during Furfuryl Alcohol Polymerization

The chemistry of biomass-derived furans is particularly sensitive to ring openings. These side reactions occur during furfuryl alcohol polymerization. In this work, the furan ring-opening was controlled by changing polymerization conditions, such as varying the type of acidic initiator or the water content. The degree of open structures (DOS) was determined by quantifying the formed carbonyl species by means of quantitative ¹⁹F NMR and potentiometric titration. The progress of polymerization and ring opening were monitored by DSC and FT-IR spectroscopy. The presence of additional water is more determining on ring opening than the nature of the acidic initiator. Qualitative structural assessment by means of ¹³C NMR and FT-IR shows that, depending on the employed conditions, poly(furfuryl alcohol) samples can be classified in two groups. Indeed, either more ester or more ketone side groups are formed as a result of side ring opening reactions. The absence of additional water during FA polymerization preferentially leads to opened structures in the PFA bearing more ester moieties.