电沉积n—CdSe在多硫溶液界面上的电荷转移机理

通过测定平带电位,澄清了OH~-离子在CdSe电极上的吸附情况,发现在S、S~(2-)、OH~-溶液中S~(2-)离子优先吸附,结合旋转环盘电极测量,证明n-CdSe电极在多硫溶液界面上的电荷转移过程。     

定标粒子理论计算非水溶液的盐效应常数

本文应用定标粒子理论计算了非电解质溶质在盐(NaI、或KI)和环丁砜组成的非水电解质溶液中溶解度的盐效应常数。硬球作用项采用Masterton-Lee的方法。软球作用项采用胡英等的径向分布函数处理方法, 并考虑进了偶极-偶极、偶极-诱导偶极、电荷-偶极和电荷-诱导偶极等相互作用。分子的硬球直径σ和能量参数∈/k由经验方程计算。由理论值和实验结果比较得出: 当σ_2取0.563 nm、离子半径取电子密度标度时, 理论值与实验值符合得较好。     

聚4—氨基联苯溶液的性质

本文报导了聚4-氨基联苯的电化学合成,测定了它的ESR、IR及紫外可见光谱。聚合物在THF、DMF和DMSO中能全部溶解。界面移动法测得聚4-氨基联苯的DMF饱和溶液中正离子的迁移率为1.48×10~(-8)m~2·S~(-1)·V~(-1)。     

磺化聚苯醚离聚体的溶液性质

研究了磺化度为20.9mol％的磺化聚苯醚(S-PPO)的钠盐和锂盐在四氢呋喃/甲醇混合溶剂中的离聚体行为。S-PPO离聚体在溶液中的链聚集状态与聚合物浓度、阳离子半径密切相关。当Na-SPPO的浓度高于3g/dL时,在30～40℃范围内其聚集度DA与浓度C的关系为:DA=ke~(εc)常数K和β分别表示为与发现链聚集的起始浓度和链聚集速率相关的常数。     

Study of intermolecular interactions in aqueous solutions by millimeter spectroscopy

The absorption of millimeter electromagnetic radiation (v=1.4, 1.71, and 5 cm⁻¹) by aqueous solutions of glycine (pH 6.1–6.2) in the concentration range of 0.5–2.5 mol L⁻¹ was measured. It was found that the absorbing ability of the water present in the solutions, is higher than that of pure water. This phenomenon is explained by the presence of a center of negative hydration in the structure of the glycine zwitterion, which results in an increase in the rotational mobility of water molecules immobilized in the hydrate shell of the glycine zwitterion. For Part 5, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1305–1307, July, 1997.     

Preparation of aromatic copolyamides containing regularly placed 1,6-hexamethylenediamine units

Copolyamides based on poly(m-phenylene isophthalamide) and poly-(p-phenylene terephthalamide), to which 1,6-diaminohexane units were regularly inserted every 3 or 5 phenylene monomer units, were synthesized. The copolymers were obtained by condensation of individually prepared diamino- and dicarboxylic-building blocks via the Yamazaki–;Higashi reaction. Solubility of the copolyamides are discussed in relation with the structure. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2379–2386, 1997     

Synthesis of polymers in aqueous solutions: Polyaddition of bis(oxazolines) with dithiol in aqueous solutions

Polyaddition of bis(4-mercaptophenyl) sulfide ( BMPS ) with m-phenylenebis(2-oxazoline) ( MPBO ) proceeded very smoothly in the mixtures of aprotic ploar solvents such as N-methyl-2-pyrrolidone ( NMP ) with water to produce the corresponding poly(amide–sulfide) with high molecular weights at 90°C under nitrogen. The reaction of BMPS with MPBO , p-phenylenebis(2-oxazoline), and 1,4-butylenebis(2-oxazoline) was also examined in water under the same conditions, and it was found that the reaction proceeds successfully to give the corresponding poly(amide–sulfide)s with high molecular weights. These results mean that water along as well as the mixed solvents of aprotic polar solvents such as NMP with water can be uses as suitable reaction media for the polyaddition of bis(oxazolines) with dithiol to synthesize poly(amide—sulfide)s with high molecular weights. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2711–2717, 1997     

Synthesis and characteristics of the poly(carboxybetaine)s and the corresponding cationic polymers

Two types of carboxybetaines and their corresponding cationic monomers and polymers are synthesized in this study. Comparing the chemical shifts of the methylene groups in the cationic monomers and carboxybetaines in both ¹H- and ¹³C-NMR spectra reveal that the respective methylene groups are clearly distinguished from their chemical shifts in ¹H- and ¹³C-NMR spectra. The solubilities, moisture regain properties, and solution properties of the poly(carboxybetaine)s and cationic polymers are investigated in relation to their molecular structures. Because the cationic polymers were ionized in an aqueous solution, the cationic polymers were more soluble than the poly(carboxybetaine). For the various functional groups of poly(carboxybetaine)s and cationic polymers, the order of tendency for moisture regain is  COO >  CONH . Results obtained from the reduced viscosity for cationic poly(TMMPAMS) are reversed from that for zwitterionic poly(DMAEAPL). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3527–3536, 1997     

In-depth analysis of glass fibers

Two types of commercial glass fibers were subjected to attack in strongly basic KOH solutions. The resulting leach solutions were analysed for Na, Ca, and Si. This showed that the corrosion process attacks the fibers incongruently. Although there are some distinct differences in the performance of these fibers, to a first approximation both types behave similarly. Further, the fibers were depth profiled using a recently developed SNMS technique for fiber in-depth analysis. This showed that both types of fibers behave in a quite dissimilar manner. The fibers were weathered already without any treatment. Although both fibers show alkali ion exchange and network splitting processes, on one of the fiber layers enriched in SiO₂, Fe₂O₃, and CaO are formed by a redeposition process from the leach solution.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday