微米铜丝的低温力学性能测试

针对纤维材料变温环境力学性能测试的需要,在华中科技大学研制的纤维材料试验机的基础上引入了温控装置,从而实现纤维材料在高低温环境下的力学性能测试。采用该装置对不同直径微米铜丝在不同温度、不同拉伸速率条件下的力学性能开展实验研究,测试结果表明弹性模量和抗拉强度随温度的降低而线性增加,屈服强度的变化不太明显。另外,低温环境下微米铜丝的力学性能表现出与其直径相关的尺度效应,而这一现象在常温下一直没有观测到。最后,还研究了拉伸速率对微米铜丝的力学性能影响,结果表明,在现有装置的许用范围之内,拉伸速率对其力学性能的影响不大。     

不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界,避免生成复杂贴体网格及动网格,极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法,将简化附加体积力以源项形式嵌入动量方程迭代中,通过用户自定义函数对CFD软件FLUENT二次开发,实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证,并探讨了插值函数对计算精度的影响。研究表明,通过引入浸入边界模型,能够提高计算效率,并实现结构网格背景下复杂边界和动边界的高效建模。     

垂直入射时无限长分层柱电磁散射的改进算法及应用

结合非均匀球粒子对平面波散射的散射场计算的改进算法,提出了平面波垂直入射无限长分层圆柱散射场快速稳定而有效的改进电磁散射算法。与已有算法相比,改进算法所能计算的无限长非均匀介质圆柱的尺寸参量突破10000,计算层数达到106,并且计算时间很短,最多仅为几秒。该算法可以用于不同的波段以及不同领域的任意无耗或吸收无限长圆柱体散射场的计算。最后将该算法应用于梯度折射率聚合物光纤(GI-POF)散射特性的研究,为非接触、在线测量聚合物光纤折射率分布提供了理论依据。     

饮用水激光拉曼光谱的比较与分析

为了对我国目前饮用水的质量进行有效检测,对市面上几种常用品牌的饮用水以及实验室提供的蒸馏水等样品做了测量和计算。运用激光拉曼光谱的分析方法,测量了它们的激光拉曼光谱。同时,通过测量计算了样品在对称伸缩振动处拉曼谱的退偏度。结果表明,在水样品的对称伸缩振动处,其拉曼谱的相对强度大小和退偏度的大小有着相同的规律。对结果进行比较和分析后得出了如下结论：可以从拉曼光谱特征峰相对强度的大小和同一特征峰下退偏度的大小两方面来判断饮用水中矿物质含量的相对多少。为鉴定饮用水的质量提供了新的有效途径。     

A ghost fluid Lattice Boltzmann method for complex geometries

A ghost fluid Lattice Boltzmann method (GF‐LBM) is developed in this study to represent complex boundaries in Lattice Boltzmann simulations of fluid flows. Velocity and density values at the ghost points are extrapolated from the fluid interior and domain boundary via obtaining image points along the boundary normal inside the fluid domain. A general bilinear interpolation algorithm is used to obtain values at image points which are then extrapolated to ghost nodes thus satisfying hydrodynamic boundary conditions. The method ensures no‐penetration and no‐slip conditions at the boundaries. Equilibrium distribution functions at the ghost points are computed using the extrapolated values of the hydrodynamic variables, while non‐equilibrium distribution functions are extrapolated from the interior nodes. The method developed is general, and is capable of prescribing Dirichlet as well as Neumann boundary conditions for pressure and velocity. Consistency and second‐order accuracy of the method are established by running three test problems including cylindrical Couette flow, flow between eccentric rotating cylinders and flow over a cylinder in a confined channel. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparison of adjustable permanent magnetic field sources

A permanent magnet assembly in which the flux density can be altered by a mechanical operation is often significantly smaller than comparable electromagnets and also requires no electrical power to operate. In this paper five permanent magnet designs in which the magnetic flux density can be altered are analyzed using numerical simulations, and compared based on the generated magnetic flux density in a sample volume and the amount of magnet material used. The designs are the concentric Halbach cylinder, the two half Halbach cylinders, the two linear Halbach arrays and the four and six rod mangle. The concentric Halbach cylinder design is found to be the best performing design, i.e. the design that provides the most magnetic flux density using the least amount of magnet material. A concentric Halbach cylinder has been constructed and the magnetic flux density, the homogeneity and the direction of the magnetic field are measured and compared with numerical simulation and a good agrement is found.     

Optical system and lens design for Blu-ray disc optical pick-up

During the design process of Blu-ray disc optical pick-up (BD OPU), the optical system and the collimator lens design is especially important. This paper designs an optical system and some lenses for the BD OPU, including collimator lens, beam shaping lens for laser beam shaping, and cylinder lens for signal detecting. In this OPU, we use a triplet lens to collimate the laser beam. At the same time, we build a series of assembly jigs to make sure that each lens can be put into the OPU basement properly. At last, we get the reading spot image and S-curve photo of OPU, which can be used to read Blu-ray disc (BD).     

Homotopy Structures for Algebras over a Monad

Let T be a monad over a category A. Then a homotopy structure for A, defined by a cocylinder P : A A, or path-endofunctor, can be lifted to the category A ^T of Eilenberg–Moore algebras over T, provided that P is consistent with T in a natural sense, i.e. equipped with a natural transformation : T P P T satisfying some obvious axioms. In this way, homotopy can be lifted from well-known, basic situations to various categories of algebras for instance, from topological spaces to topological semigroups, or spaces over a fixed space (fibrewise homotopy), or actions of a fixed topological group (equivariant homotopy); from categories to strict monoidal categories; from chain complexes to associative chain algebras. The interest is given by the possibility of lifting the homotopy operations (as faces, degeneracy, connections, reversion, interchange, vertical composition, etc.) and their axioms from A to A ^T , just by verifying the consistency between these operations and : T P P T. When this holds, the structure we obtain on our category of algebras is sufficiently powerful to ensure the main general properties of homotopy.     

Optimal control of stretching process of solar arrays on spacecraft using wavelet expansion method

The optimal attitude control problem of spacecraft during its solar arrays stretching process is discussed in the present paper. By using the theory of wavelet analysis in control algorithm, the discrete orthonormal wavelet function is introduced into the optimal control problem, the method of wavelet expansion is substituted for the classical Fourier basic function. An optimal control algorithm based on wavelet analysis is proposed. The effectiveness of the wavelet expansion approach is shown by numerical simulation. This work is supported by the National Natural Science Foundation of China.     

Slow magnetohydrodynamic flow past a circular cylinder

Oseen’ approximations are used to study the slow motion of a viscous, incompressible, electrically conducting fluid past a circular cylinder in the presence of a uniform aligned magnetic field. Using series truncation method, the analytical solutions for the first three terms in the Fourier sine series expansion of the stream function are obtained. Numerical values of the tangential drag for different values of magnetic interaction parameter and viscous Reynolds number are calculated.