Enhanced energy storage behaviors in free-standing antiferroelectric Pb(Zr_(0.95)Ti_(0.05))O_3 thin membranes

Free-standing antiferroelectric Pb(Zr_(0.95)Ti_(0.05)O_3(PZT(95/5)) thin film is fabricated on 200-nm-thick Pt foil by using pulsed laser deposition.X-ray diffraction patterns indicate that free-standing PZT(95/5) film possesses an α-axis preferred orientation.The critical electric field for the 300-nm-thick free-standing PZT(95/5) film transiting from antiferroelectric to ferroelectric phases is increased to 770 kV/cm,but its saturation polarization remains almost unchanged as compared with that of the substrate-clamped PZT(95/5) film.The energy storage density and energy efficiency of the substrate-clamped PZT(95/5) film are 6.49 J/cm~3 and 54.5%,respectively.In contrast,after removing the substrate,the energy storage density and energy efficiency of the free-standing PZT(95/5) film are enhanced up to 17.45 J/cm~3 and 67.9%,respectively.     

Ultrasound-assisted regeneration of zeolite/water adsorption pair

The use of ultrasound to enhance the regeneration of zeolite 13X for efficient utilization of thermal energy was investigated as a substitute to conventional heating methods. The effects of ultrasonic power and frequency on the desorption of water from zeolite 13X were analyzed to optimize the desorption efficiency. To determine and justify the effectiveness of incorporating ultrasound from an energy-savings point of view, an approach of constant overall input power of 20 or 25 W was adopted. To measure the extent of the effectiveness of using ultrasound, the ultrasonic-power-to-total power ratios of 0.2, 0.25, 0.4 and 0.5 were investigated and the results compared with those of no-ultrasound (heat only) at the same total power. To analyze the effect of ultrasonic frequency, identical experiments were performed at three nominal ultrasonic frequencies of ~28, 40 and 80 kHz. The experimental results showed that using ultrasound enhances the regeneration of zeolite 13X at all the aforementioned power ratios and frequencies without increasing the total input power. With regard to energy consumption, the highest energy-savings power ratio (0.25) resulted in a 24% reduction in required input energy and with an increase in ultrasonic power, i.e. an increase in acoustic-to-total power ratio, the effectiveness of applying ultrasound decreased drastically. At a power ratio of 0.2, the time required for regeneration was reduced by 23.8% compared to the heat-only process under the same experimental conditions. In terms of ultrasonic frequency, lower frequencies resulted in higher efficiency and energy savings, and it was concluded that the effect of ultrasonic radiation becomes more significant at lower ultrasonic frequencies. The observed inverse proportionality between the frequency and ultrasound-assisted desorption enhancement suggests that acoustic dissipation is not a significant mechanism to enhance mass transfer, but rather other mechanisms must be considered.     

Implications of the nuclear EMC effect

The discovery more than twenty years ago, by the EMC Collaboration, that the deep-inelastic-scattering DIS structure functions are influenced by the nuclear environment stunned the nuclear physics community and brought quarks and gluons into the field with great impact. A great length of time has passed, but despite a semi-infinite number of papers on the subject, there is no explanation that is universally accepted. Many models (related in one way or another to QCD) have been successful in reproducing data for deep inelastic scattering on nuclear targets, but fewer have described both the DIS and nuclear Drell-Yan experiments. Although there are some positive indications, no model has been used to predict correctly and unambiguously new independent phenomena. We review the history and discuss the best experimental prospects for future discovery.     

A nonextensive approach to the dynamics of financial observables

We present results about financial market observables, specifically returns and traded volumes. They are obtained within the current nonextensive statistical mechanical framework based on the entropy . More precisely, we present stochastic dynamical mechanisms which mimic probability density functions empirically observed. These mechanisms provide possible interpretations for the emergence of the entropic indices q in the time evolution of the corresponding observables. In addition to this, through multi-fractal analysis of return time series, we verify that the dual relation q_stat+q_sens=2 is numerically satisfied, q_stat and q_sens being associated to the probability density function and to the sensitivity to initial conditions respectively. This type of simple relation, whose understanding remains ellusive, has been empirically verified in various other systems.     

Emergence of bimodality in noisy systems with single-well potential

We study the stationary probability density of a Brownian particle in a potential with a single-well subject to the purely additive thermal and dichotomous noise sources. We find situations where bimodality of stationary densities emerges due to presence of dichotomous noise. The solutions are constructed using stochastic dynamics (Langevin equation) or by discretization of the corresponding Fokker-Planck equations. We find that in models with both noises being additive the potential has to grow faster than |x| in order to obtain bimodality. For potentials ∝|x| stationary solutions are always of the double exponential form.     

LiF∶F_2晶体中实现三维光数据存储的实验研究

基于LiF∶F2晶体在近红外飞秒脉冲激光作用下产生F2色心向F3 色心的转变,以及两种色心荧光光谱的不同,实现了荧光反射共焦读出和多光子写入的三维光数据存储的原理性实验.钛宝石再生放大器输出的脉冲宽度100fs、中心波长800nm、重复频率1kHz的超短脉冲激光束,用数值孔径0.68的显微物镜聚焦到LiF:F2晶体内部,通过移动晶体实现了三维逐位式数据写入;用405nm的连续蓝光激发存储位,通过探测F3 色心产生的540nm荧光,实现了对信息位进行快速非破坏性的反射共焦读出.与多光子三维存储的透射共焦散射读出和相衬读出相比,格式与现存光盘技术兼容,结构简单;更重要的是,存储信息位是依靠荧光光谱的变化,折射率变化很小,可以有效增加读出层数.     

Permutation complexity via duality between values and orderings

We study the permutation complexity of finite-state stationary stochastic processes based on a duality between values and orderings between values. First, we establish a duality between the set of all words of a fixed length and the set of all permutations of the same length. Second, on this basis, we give an elementary alternative proof of the equality between the permutation entropy rate and the entropy rate for a finite-state stationary stochastic processes first proved in [J.M. Amigó, M.B. Kennel, L. Kocarev, The permutation entropy rate equals the metric entropy rate for ergodic information sources and ergodic dynamical systems, Physica D 210 (2005) 77-95]. Third, we show that further information on the relationship between the structure of values and the structure of orderings for finite-state stationary stochastic processes beyond the entropy rate can be obtained from the established duality. In particular, we prove that the permutation excess entropy is equal to the excess entropy, which is a measure of global correlation present in a stationary stochastic process, for finite-state stationary ergodic Markov processes.     

热管冰蓄冷结构设计

从技术角度研究和探讨了热管做为冰蓄冷装置的适用性;对各种热管用金属管材与工质的特性进行了科学比较;从而最终确定了适宜冰蓄冷工作的热管管材、热管工质及其基本尺寸;为热管冰蓄冷装置的深入研究及推广应用,提供了强有力的理论依据。     

IR laser ablation of doped poly(methyl methacrylate)

We investigate the TEA CO₂ laser ablation of films of poly(methyl methacrylate), PMMA, with average M_W 2.5, 120 and 996 kDa doped with photosensitive compounds iodo-naphthalene (NapI) and iodo-phenanthrene (PhenI) by examining the induced morphological and physicochemical modifications. The films casted on CaF₂ substrates were irradiated with a pulsed CO₂ laser (10P(20) line at 10.59 μm) in resonance with vibrational modes of PMMA and of the dopants at fluences up to 6 J/cm². Laser induced fluorescence probing of photoproducts in a pump and probe configuration is carried out at 266 nm. Formation of naphthalene (NapH) and phenanthrene (PhenH) is observed in NapI and PhenI doped PMMA, respectively, with relatively higher yields in high M_W polymer, in similarity with results obtained previously upon irradiation in the UV at 248 nm. Above threshold, formation of photoproducts is nearly complete after 200 ms. As established via optical microscopy, bubbles are formed in the irradiated areas with sizes that depend on polymer M_W and filaments are observed to be ejected out of the irradiated volume in the samples made with high M_W polymer. The implications of these results for the mechanisms of polymer IR laser ablation are discussed and compared with UV range studies.