像增强器信噪比测试方法的分析与研究

通过对像增强器信噪比常用测试方法的研究与分析,提出了一种对CCD摄像机采集的图像进行处理的新的信噪比测试方法,解决了在常用信噪比测试方法中待测参数多、采用测试仪器多的问题。利用新的测试方法和搭建的实验系统不仅实现了数据的统一处理,而且还可以分析照度与信噪比的关系。     

Transition from decelerated to accelerated cosmic expansion in braneworld universes

Braneworld theory provides a natural setting to treat, at a classical level, the cosmological effects of vacuum energy. Non-static extra dimensions can generally lead to a variable vacuum energy, which in turn may explain the present accelerated cosmic expansion. We concentrate our attention in models where the vacuum energy decreases as an inverse power law of the scale factor. These models agree with the observed accelerating universe, while fitting simultaneously the observational data for the density and deceleration parameter. The redshift at which the vacuum energy can start to dominate depends on the mass density of ordinary matter. For _m = 0.3, the transition from decelerated to accelerated cosmic expansion occurs at z _T ≈ 0.48 ± 0.20, which is compatible with SNe data. We set a lower bound on the deceleration parameter today, namely > − 1 + 3 _m /2, i.e., > − 0.55 for _m = 0.3. The future evolution of the universe crucially depends on the time when vacuum starts to dominate over ordinary matter. If it dominates only recently, at an epoch z < 0.64, then the universe is accelerating today and will continue that way forever. If vacuum dominates earlier, at z > 0.64, then the deceleration comes back and the universe recollapses at some point in the distant future. In the first case, quintessence and Cardassian expansion can be formally interpreted as the low energy limit of our model, although they are entirely different in philosophy. In the second case there is no correspondence between these models and ours.     

转移基板材质对Si衬底GaN基LED芯片性能的影响

在Si衬底上生长了GaN基LED外延材料,分别转移到新的硅基板和铜基板上,制备了垂直结构蓝光LED芯片。研究了这两种基板GaN基LED芯片的光电性能。在切割成单个芯片之前,对大量尺寸为(300μm×300μm)的这两种芯片分别通高达1 A的大电流在测试台上加速老化1 h。结果显示,铜基板Si衬底GaN基LED芯片有更大的饱和电流,光输出效率更高,工作电压随驱动电流的变化不大,光输出在老化过程中衰减更小。铜基板芯片比硅基板芯片可靠性更高,在大功率半导体照明器件中前景诱人。     

一种三次非旋转对称的相位板的检测系统设计

作为零位干涉检测方法中非常有前途的一种方法.计算全息可以用于非旋转对称的非球面的检测.以三次相位板为例,阐述了利用计算全息图检测非旋转对称的非球面的基本原理.分析并推导了三次相位传播过程引入的高阶波像差的理论公式,给出了三次相位板的检测系统的没计结果.详细讨论了计算全息图衍射级次的分离以及计算全息图的二元化,给出了振幅型的计算全息图的图样.计算全息图的刻线最小问隔是40μm,计算全息图的制作精度对检测结果的波前误差的影响仅仅为0.005λ.对检测系统作了详细的公差分析,结果表明所有调整公差对整个检测系统的影响和方根值为83.954 nm.     

高氧空位简并锐钛矿TiO2半导体电子寿命的第一性原理研究

为了研究锐钛矿TiO₂晶体中高氧空位浓度对电子寿命的影响,利用基于局域密度泛函理论框架下的广义梯度近似平面波超软赝势方法, 用第一性原理对含高氧空位浓度的锐钛矿TiO₂晶体进行了结构优化处理、能带分布和态密度分布计算, 表明在温度一定和高氧空位浓度的条件下, 锐钛矿TiO₂的电子寿命随氧空位浓度的增大而减小;电子浓度的大小对电子寿命无影响.同时,锐钛矿TiO₂晶体中高氧空位浓度时,发现有莫特相变的现象. 关键词： 高氧空位 2半导体')" href="#">锐钛矿TiO₂半导体 电子寿命 第一性原理     

有限元仿真兰姆波评价胶接接头界面弹性模量的研究

金属薄板检测中,声-超声检测方法可激发多模式的兰姆波,兰姆波能够评价金属胶接后结构质量,正确认识兰姆波传播特性与胶接接头弹性模量的关系是有效应用该技术的基础。本文采用有限元仿真法分析这种关系,得出随着胶层弹性模量的降低,各模式兰姆波通过胶接接头后能量有不同程度的衰减,频率为0.5 MHz和1 MHz时,兰姆波主要模式A₀、S₀能量值与接头弹性模量具有一定的线性关系。实验结果表明,低频时随着胶接接头的人工老化,接头中主要模式兰姆波能量均发生一定程度的衰减,其能量变化曲线与有限元仿真结果趋势一致。本方法能为实验研究、实际检测提供有效参考依据。     

Novel correction method for X-ray beam energy fluctuation of high energy DR system with a linear detector

A high energy digital radiography (DR) testing system has generated diverse scientific and technological interest in the field of industrial non-destructive testing. However, due to the limitations of manufacturing technology for accelerators, an energy fluctuation of the X-ray beam exists and leads to bright and dark streak artifacts in the DR image. Here we report the utilization of a new software-based method to correct the fluctuation artifacts. The correction method is performed using a high pass filtering operation to extract the high frequency information that reflects the X-ray beam energy fluctuation, and then subtracting it from the original image. Our experimental results show that this method is able to rule out the artifacts effectively and is readily implemented on a practical scanning system.     

一种离轴计算全息图在凹非球面检测中的应用

为了精确检测大口径非球面面型质量,将CGH作为补偿器应用于凹非球面的离轴全息检测系统中.根据计算全息图的离轴全息检测系统检测凹非球面的基本原理,分析了离轴CGH的计算、制作过程,实现了对口径为150 mm,近轴半径为1499.7 mm,非球面系数为-1的凹非球面镜的检测.实验结果与轮廓仪检测结果吻合得很好.     

超声检测中变采样问题研究

本文对超声检测中常遇到的变采样问题进行讨论，比较了两种实现方法：基于特征值的二次采样和滤波器组，并给出了二次采样算法。通过试验，对这两种方法在超声信号变采样前后时频域特性的变化做了比较分析，得出前者可以很好地保留检测中所需的特征信号，但频域特性较差；而后者有很好的频域特性，便于进行时频分析。