小功率高转速蒸汽透平试验研究和优化

小功率高转速蒸汽透平试验研究和优化邵振麒（同济大学汽车工程系上海２０００９２）关键词：小蒸汽透平，效率，优化１前言回收能量和工业装置的余热及利用太阳能等新能源是节能和环保的重要措施，由此产生的机械能可供发电，气体增压等多种用途。在一些废热量不大且不宜...     

核动力航空推进探析

文献调研国外核动力航空推进相关技术研究,美国GE与PW公司通过ANP计划已试验验证了核动力航空推进的可行性;分析认为核动力航空推进当前最佳用途是长航时无人机与巡航导弹动力,关键技术是核屏蔽的轻量化设计、热交换效率与速率、热力系统设计与新型结构问题;核动力航空推进若采用蒸汽介质的二回路闭式循环驱动螺旋桨,蒸汽透平及动力系统设计没有技术障碍,闭式循环蒸汽流量关键取决于蒸汽透平汽耗率与热交换循环时间。     

Fictitious domain methods for two‐phase flow energy balance computations in nuclear components

This paper is dedicated to the numerical simulation of nuclear components (cores and steam generators) by fictitious domain methods. The fictitious domain approach consists in immersing the physical domain under study in a Cartesian domain, called the fictitious domain, and in performing the numerical resolution on this fictitious domain. The calculation times are then efficiently reduced by the use of fast solvers. In counterpart, one has to handle with an immersed boundary, generally non‐aligned with the Cartesian mesh, which can be non‐trivial. The two fictitious domain methods compared here on industrial simulations and developed by Ramière et al. deal with an approximate immersed interface directly derived from the uniform Cartesian mesh. All the usual immersed boundary conditions (Dirichlet, Robin, Neumann), possibly mixed, are handled through a unique formulation of the fictitious problem. This kind of approximation leads to first‐order methods in space that exhibit a good ratio of the precision of the approximate solution over the CPU time, which is very important for industrial simulations. After a brief recall of the fictitious domain method with spread interface (Ramière et al., CMAME 2007) and the fictitious domain method with immersed jumps (Ramière et al., JCP 2008), we will focus on the numerical results provided by these methods applied to the energy balance equation in a steam generator. The advantages and drawbacks of each method will be pointed out. Generally speaking, the two methods confirm their very good efficiency in terms of precision, convergence, and calculation time in an industrial context. Copyright © 2011 John Wiley & Sons, Ltd.     

Heat transfer in bubble layers at high pressures

An original experimental investigation of heat transfer with steam condensation on a surface of a horizontal cooled tube immersed in a bubbling layer was carried out. A copper test section 16 mm in diameter and 285 mm in length was placed in a bubbling column 295 mm in diameter. Experiments were made under a pressure of 0.72-3.8 MPa with volume steam content 0-0.18, steam superficial velocities 0-0.18 m/s, and liquid-wall temperature difference 38–106 K. The heat transfer process in a bubbling layer under high pressures is shown to be of considerably intensity; with moderate values of steam content heat transfer coefficients reach 10–12 kW/(m²·K). The use of the known correlations assumed for the case of air bubbling under atmospheric pressure results in systematically underestimating heat transfer by 30–80%. Data were obtained on heat transfer with film condensation of steam and natural convection of subcooled water at high temperature differences outside the range investigated earlier. Experimental data table is appended.     

直接内重整熔融碳酸盐燃料电池中甲烷蒸汽重整催化剂探索性研究

选择甲烷蒸汽重整催化剂用于直接内重整熔融碳酸盐燃料电池(DIR-MCFC)中,并考察了DIR-MCFC的性能,讨论了电池放电量、气体压力、燃料气进料水/碳比(S/C)等因素对该催化剂性能的影响.结果表明,重整催化剂能够满足电池放电需求;放电量大小影响电池内的H2含量,但对CH4含量影响不大;当气体压力为0.36MPa时...     

Enhanced photocatalytic activity of thin TiO2 films dotted with ZnS nanoparticles

The effect of Ni loading on the catalytic activity of Ni/ZrO₂ catalyst for methane steam reforming was investigated. The sample containing 15 wt.% Ni exhibited the highest activity as well as stability at 600°C. An erratum to this article is available at .     

基于流函数模型的矢量海流生成方法

提出了一种基于海洋流函数模型的双站高频地波雷达径向流生成矢量流算法.该算法避免了传统矢量合成法将径向流进行插值带来的误差,而且符合海洋动力学原理,生成的流场更接近实际分布.通过计算机仿真发现,流函数算法的容错、容差能力比矢量合成法更强.在径向流探测标准误差为10 cm.s-1时,新算法反演结果的均方根误差减小了约5 cm.s-1.应用到雷达实测数据中,与海流计实测结果比较表明,新算法比传统算法的平均误差减小了2 cm.s-1.     

循环倍率对动力和液体燃料多联产系统的电与蒸汽自平衡影响分析

本文以煤气化(240万吨/年)动力,液体燃料(甲醇,醋酸,醋酐)多联产系统(串联式)为研究对象,分析了循环倍率对系统动力输出、蒸汽、液体燃料产量的影响;确定了可满足具有不同优先级的目标、达到系统动力和蒸汽自平衡的循环倍率、燃气轮机选型等关键单元和系统参数。     

薄油层SAGD开发蒸汽腔发育和生产指标预测

通过分析现场生产数据和数值模拟结果,将薄层稠油油藏蒸汽辅助重力驱油(SAGD)生产中蒸汽腔发育分为横向扩展和向下运移两个过程,并进行简化处理预测SAGD生产指标.联合质量守恒方程、能量守恒方程和周围地层散热模型得到一个描述蒸汽腔发育的综合表达式,该方程属于典型的第二类Volterra积分函数.通过拉普拉斯变换对Volterra积分函数进行半解析求解,最终得到不同时刻蒸汽腔发育状态.为验证模型的正确性,将模型的计算结果与CMG Stars的计算结果对比,整体误差小于5%.新模型可以方便简单地预测SAGD生产中蒸汽腔发育过程和生产动态指标,从而确定SAGD生产的极限油藏参数和合理的注采参数.     

汽爆技术促进中药资源高值化利用

汽爆技术在中药资源高值化利用中发挥的作用正在逐渐体现:汽爆处理打破中药植物细胞壁的屏障结构,有利于有效成分的分离提取;汽爆过程物料自体水解发生去糖苷化作用使天然植物中的苷元与糖基分离,提高苷类物质提取和分离效率;汽爆应用于中药炮制和中药脱毒有高效、快速和避免有效成分流失等优点;汽爆处理有利于中药非药用组分如纤维素、半纤维素等的有效分离和利用,联产乙醇、丁醇等能源和化工产品。本文对汽爆技术在中药资源高值化利用中的研究进展进行了综述。