突出矿井瓦斯抽放限制影响因素的AHP-熵权法评价模型

为提高煤与瓦斯突出矿井瓦斯抽放效果,建立了3个一级指标、14个二级指标的突出矿井瓦斯抽放限制影响因素评价指标体系,利用AHP和熵权法分别确定指标因子主、客观权重.通过实地调研分析和反馈验证了AHP-熵权法的可行性和正确性,利用加权平均法确定评价模型的综合权重.研究表明:封孔方式、钻孔半径、抽放时间、煤体裂隙发育程度和抽放负压是目前影响煤矿瓦斯抽放效果的主控因素.     

A stability of the steady flow of compressible viscous fluid with respect to initial disturbance (v∞ ≠ 0)

We consider a compressible viscous fluid with the velocity at infinity equal to a strictly non‐zero constant vector in ?³. Under the assumptions on the smallness of the external force and velocity at infinity, Novotny–Padula (Math. Ann. 1997; 308 :439– 489) proved the existence and uniqueness of steady flow in the class of functions possessing some pointwise decay. In this paper, we study stability of the steady flow with respect to the initial disturbance. We proved that if H³‐norm of the initial disturbance is small enough, then the solution to the non‐stationary problem exists uniquely and globally in time, which satisfies a uniform estimate on prescribed velocity at infinity and converges to the steady flow in L_q‐norm for any number q? 2. Copyright © 2006 John Wiley & Sons, Ltd.     

长周期光纤光栅折射率特性仿真的新方法

基于长周期光纤光栅的模式耦合机理,提出一种快速模拟长周期光纤光栅折射率特性的方法。该方法在计算包层模式的有效折射率时分开计算,在环境折射率小于包层折射率时采用二分法和分步搜索法结合计算包层模式的有效折射率,在环境折射率大于包层折射率时采用Nelder-Mead加分步搜索法求解包层模式的有效折射率。在应用谐振波长的决定式求解与环境折射率的匹配的谐振波长时,采用变区间应用二分法求解而不是传统的逐步搜索法求解谐振波长。数值结果与实验结果做了对比,两者基本一致。实践证明,该方法方便快捷,比一般的方法速度提高7倍以上。     

可交联聚甲基丙烯酸甲酯的合成、表征及在阵列式波导光栅中的应用

合成了含环氧基团的可交联的甲基丙烯酸甲酯和甲基丙烯酸环氧丙酯的共聚物[Poly(MMA-co-GMA)],通过FTIR,NMR,GPC,DSC和AFM等技术对其进行了表征. 结果表明,所合成的聚合物材料具有较好的成膜性; 通过热固化使引入的环氧基团开环交联,该聚合物的玻璃化转变温度(Tg)比固化前提高了24 K,同时有效地降低了聚合物的双折射率. 用Poly(MMA-co-GMA)作为包层材料,双酚A型环氧化合物作为高折射率材料, 将其引入到包层材料中形成芯层材料的折射率在波长1.55 μm处可调,其范围是1.483~1.588. 采用旋涂、 铝掩膜和氧反应离子刻蚀的方法(RIE)制得了阵列式光波导. 测试结果表明,制作的波导在1.55 μm处实现了光的单模传输,光损小于3.0 dB/cm.      

红外光学材料折射率温度系数测量装置

本文介绍一台红外光学材料折射率温度系数测量装置。该装置是由温控系统、精密测角系统、光学系统和电器控制系统等组成的一台高精度全自动化测量系统，采用改进的自准直法测量折射率温度系数值。该装置达到的主要技术指标：工作波长为2～12μm，温度范围为-50～150℃，测量不确定度为3%，可满足各种红外光学材料折射率温度系数测量的要求。利用该装置对红外材料锗折射率温度系数值进行了测量，并对测量数据进行了报道。     

基于M2因子测量的大气湍流参数的确定方法

基于广义惠更斯-菲涅尔原理以及大气湍流理论,推导出部分相干光束在大气湍流中传输的光束传输M ^{2因子的解析表达式.定量分析了表征大气湍流参数的折射率结构常数 C2_n}和涡旋内尺度 l _{0对 M ^{2因子的影响,并由此提出了一种通过实验测量大气湍流中光束的 M 2因子,进而确定出大气湍流参数的新方法.研究结果表明,由于大气湍流对相干性好的光束影响更为明显,在测量中可采用具有高相干性的基模高斯光束作为测量光源,而测量装 关键词： 2因子')" href="#">光束传输 M 2因子 大气湍流参数 湍流折射率结构常数 湍流涡旋内尺度}}     

Light induced refractive index changes in PMMA films doped with styrene

Solutions of poly(methyl methacrylate) in styrene are used to produce thin polymer films (1m–20m) saturated with styrene monomer. In the illuminated areas refractive index changes up to 10^–2 are achieved by photoinduced polymerisation. The index patterns may be fixed by annealing treatments removing the residual monomer.We thank P. Hertel, M. Kopietz, M. D. Lechner and D. Steinmeier for valuable discussions. Financial support of the Stiftung Volkswagenwerk is gratefully acknowledged.     

A High‐Voltage and Ultralong‐Life Sodium Full Cell for Stationary Energy Storage

Recently, there has been great interest in developing advanced sodium‐ion batteries for large‐scale application. Most efforts have concentrated on the search for high‐performance electrode materials only in sodium half‐cells. Research on sodium full cells for practical application has encountered many problems, such as insufficient cycles with rapid capacity decay, low safety, and low operating voltage. Herein, we present a layered P2‐Na_0.66Ni_0.17Co_0.17Ti_0.66O₂, as both an anode (ca. 0.69 V versus Na⁺/Na) and as a high‐voltage cathode (ca. 3.74 V versus Na⁺/Na). The full cell based on this bipolar electrode exhibits well‐defined voltage plateaus near 3.10 V, which is the highest average voltage in the symmetric cells. It also shows the longest cycle life (75.9 % capacity retention after 1000 cycles) in all sodium full cells, a usable capacity of 92 mAh g^?1, and superior rate capability (65 mAh g^?1 at a high rate of 2C).     

Application of a retention database to the identification of individual polychlorinated biphenyl congeners in Aroclors mixture using selected polychlorinated biphenyls as a reference series

The database of the relative retention times (RRTs) of polychlorinated biphenyls (PCBs) reported in literature was used to calculate the retention indices (RIs) of all 209 PCB congeners on temperature programmed capillary column Rtx-5. Calculation of retention indices was based on reference series of seven congeners (PCB IUPAC Nos. 18, 52, 101, 143, 185, 203 and 206) that exhibit linear relative retention time behaviour as a function of chlorine number. The calculated indices were compared to those determined in our laboratory as well as to those obtained by other authors. The proposed indices system was applied for identification individual congeners in mixture of Aroclors 1242:1254:1260, using only reference series of PCBs.     

A unique reversal of elution order during direct enantiomeric resolution of amide derivatives of 1-phenyl-2-aminopropane by high performance liquid chromatography on chiral stationary phases

Enantiomeric amide derivatives of (S)- and (R)-1-phenyl-2-aminopropane (dextro- and levoamphetamine, respectively) were resolved by high performance liquid chromatography on commercially available ionically and covalently bonded chiral stationary phases ((R)-N-(3,5-dinitrobenzoyl)phenylglycine). Ten enantiomeric amide pairs were synthesized and chromatographed on the columns by using a mobile phase of hexane-isopropanol (97 : 3), a flow rate of 2 ml/min, and a column temperature of 20°C. The (R)-isomer of all 10 amides eluted first on the covalent column as did the (R)-isomer of nine derivatives on the ionic column. however, the 3,5-dinitrobenzoyl amide of (S)- amphetamine eluted before the (R)-isomer on the ionic column. This reversal in enantiomeric elution order reveals the complexity of the interactions occurring on these columns and emphasizes the hazards of relying on observed elution order as an a priori indication of absolute configuration.