透镜初级球差的横向剪切干涉条纹研究

利用玻璃平行平板构成简单的横向剪切干涉仪可以观察到单薄透镜形成的准直光束的剪切干涉条纹,由干涉条纹分布求出对应的几何像差和离焦量.用焦距为190 mm的单薄透镜做实验,实验结果与计算机模拟结果符合,说明可以从剪切干涉条纹的分布求出透镜的轴向调整误差和初级球差.     

用多焦点全息透镜实现多重谱分数傅里叶变换

提出用多焦点全息透镜实现多重谱分数傅里叶变换.利用全息方法通过一次曝光制作出多焦点的全息透镜,分析了用此全息元件实现这种变换的条件,并在实验上实现了多重谱分数傅里叶变换. 实验结果表明这种变换方法简便可行,可广泛应用于多通道光学信息处理系统及多目标图像识别系统中.     

Application of the finite Hankel transform to a diffusion problem without azimuthal symmetry

The problem treated in this paper concerns calculating the evolution of the pressure in a single-phase, slightly compressible fluid in a porous medium consisting of communicating layers. The fluid is produced through a point sink located on the side of an otherwise sealed cylindrical wellbore. This location of the sink causes the flow around the wellbore to be azimuthally asymmetric.The problem is solved through successive application of Laplace, finite Fourier and finite Hankel transforms. Although apparently straightforward, this approach leads to serious numerical difficulties. The published form of the inversion formula for the finite Hankel transform leads to inaccurate computation for the higher azimuthal modes even with 128 bit arithmetic. An alternative form is developed which enables accurate evaluation of the solution with the more practical 64 bit arithmetic. The technique for two-layer solution presented here can be directly extended to a problem with a larger number of communicating layers. This is the first instance of successful application of the finite Hankel transform to an azimuthally asymmetric diffusion problem.     

Tail probabilities of the limiting null distributions of the Anderson–Stephens statistics

For the purpose of testing the spherical uniformity based on i.i.d. directional data (unit vectors) z_i, i=1,…,n, Anderson and Stephens (Biometrika 59 (1972) 613–621) proposed testing procedures based on the statistics S_max=max_u S(u) and S_min=min_u S(u), where u is a unit vector and nS(u) is the sum of squares of u′z_i's. In this paper, we also consider another test statistic S_range=S_max−S_min. We provide formulas for the P-values of S_max, S_min, S_range by approximating tail probabilities of the limiting null distributions by means of the tube method, an integral-geometric approach for evaluating tail probability of the maximum of a Gaussian random field. Monte Carlo simulations for examining the accuracy of the approximation and for the power comparison of the statistics are given.     

Lax Pairs for Equations Describing Compatible Nonlocal Poisson Brackets of Hydrodynamic Type and Integrable Reductions of the Lamé Equations

We solve the problem of describing compatible nonlocal Poisson brackets of hydrodynamic type. We prove that for nonsingular pairs of compatible nonlocal Poisson brackets of hydrodynamic type, there exist special local coordinates such that the metrics and the Weingarten operators of both brackets are diagonal. The nonlinear evolution equations describing all nonsingular pairs of compatible nonlocal Poisson brackets of hydrodynamic type are derived in these special coordinates, and the integrability of these equations is proved using the inverse scattering transform. The Lax pairs with a spectral parameter for these equations are found. We construct various classes of integrable reductions of the derived equations. These classes of reductions are of an independent differential-geometric and applied interest. In particular, if one of the compatible Poisson brackets is local, we obtain integrable reductions of the classical Lamé equations describing all orthogonal curvilinear coordinate systems in a flat space; if one of the compatible brackets is generated by a constant-curvature metric, the corresponding equations describe integrable reductions of the equations for orthogonal curvilinear coordinate systems in a space of constant curvature.     

Comparison of volumes by means of the areas of central sections

The Busemann–Petty problem asks whether origin-symmetric convex bodies in Rⁿ with smaller areas of all central hyperplane sections necessarily have smaller n-dimensional volume. The solution was completed in the end of the 1990s, and the answer is affirmative if n4 and negative if n5. Since the answer is negative in most dimensions, it is natural to ask what information about the volumes of central sections of two bodies does allow to compare the n-dimensional volumes of these bodies in all dimensions. In this article we give an answer to this question in terms of certain powers of the Laplace operator applied to the section function of the body.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

Synthesis of spherical and hemispherical sugar‐containing poly(ornithine) dendrimers

A novel sugar‐containing poly(ornithine) dendrimer is synthesized for possible antigen delivery and related applications. The dendrimer contains an ornithine dendron as interior scaffolding and oligosaccharides on the periphery, which provide an attachment site for a peptide antigen. Maltose or lactose is bound to both hemispherical and spherical poly(ornithine) dendrimer generation 3 (G3) by reductive amination between its reducing end and the peripheral amino group of the dendrimer using a borane‐pyridine complex in a buffer solution at 50 °C. The degree of substitution of sugar is changed by varying the molar ratio of sugar to dendrimer. When the surface of spherical poly(ornithine) dendrimer G3 is modified by binding β‐alanine to the 16 amino groups, highly substituted maltose‐ or lactose‐β‐alanine‐poly(ornithine) dendrimer G3 is obtained in high yield after 7 days of reaction. The structures of these sugar‐containing dendrimers are characterized by NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1400–1414, 2004     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

EXISTENCE OF GLOBAL SMOOTH SOLUTION FOR SCALAR CONSERVATION LAWS WITH DEGENERATE VISCOSITY IN 2-DIMENSIONAL SPACE

This article concerns the existence of global smooth solution for scalar conservation laws with degenerate viscosity in 2-dimensional space. The analysis is based on successive approximation and maximum principle.